[电信]EWSDSymptom文件.doc

广东省电信科学技术研究院交换五部 Symptom文件Symptom文件1、 概述1.1、 Symptom文件EWSD系统中，Symptom文件包括以下几种类型：- Symptom files (created by the system)；- Symptom files (connection with basic operation)；- Symptom files (created by the user)；- Symptom files (created in procedure)；- Further history files。1.1.1、 Symptom files (created by the system)The following symptom files are created automatically during installation of the system.- AD.ZZK(ARCHIVE FILE)The file contains a collection of messages from the section #7 signaling.- HF.ARCHIVE(ARCHIVE FILE)The file contains a collection of all error symptoms and alarm messages.- HF.MCP.HWERROR(ARCHIVE FILE)The file contains a collection of all sporadic hardware fault messages.- HF.MN7.HWERRORThe file contains a collection of hardware faults messages from the section #7 signaling.- HF.Q3ASThe file contains a collection of messages about errors that occurred during set-up of connections or errors that lead to breakdown of connections at the Q3-interface.- HF.SMMLThe file contains a collection of messages about errors that occurred during set-up of connections or errors that lead to breakdown of connections in case of SMML jobs.- HF.TRANSFILE(ARCHIVE FILE)The file contains transfer jobs (beginning, interruption, continuation and finishing of file transfer).- SG.SESYMP(ARCHIVE FILE)The file contains a collection of SW error symptoms.- SG.BX25(ARCHIVE FILE)The file contains a collection of SW error symptoms from the section IOP:LAU. This file is created as soon as a software error is detected in the IOP:LAU.- SG.OPER(ARCHIVE FILE)The file contains a collection of safeguarding messages from the operating phase (without CCS7 safeguarding).- TM.MNT.PCM(ARCHIVE FILE)The file contains a collection of PCM-link-specific system messages.- TM.PCM.AL.STATThe file contains a collection of statistic data from PCM links.- TM.MNT.PORT(ARCHIVE FILE)The file contains a collection of system messages from the trunk maintenance section (see also MMN:SW, PROC:SW232).- TM.PCD.SAIThe file contains a collection of messages of the PCD performance measurement (see also MMN:SW, PROC:SW232).- XF.DOCKETThe file contains a collection of job messages from the docket management for ISO file transfer (FTAM).1.1.2、 Symptom files (connection with basic operation)The following symptom files are created when an ISTART is interrupted or if basic operation is reached. For saving and evaluating the files DC. have to be dumped into corresponding files DD. This is done automatically during symptom saving.- DC.VnnThe file contains a collection of error symptoms after interrupted ISTART (nn = 00.07).- DC.BnnThe file contains a collection of SW error symptoms in call processing basic operation that return the system to call processing basic operation again (nn = 00.01).1.1.3、 Symptom files (created by the user)The following files are created by the user to save individual symptoms.- AD.RESTARTThe file contains a collection of plausibility check failures.1.1.4、 Symptom files (created in procedure)The following symptom files are created temporary during execution of this procedure. Output messages that may give on overview about the actual system configuration are diverted into these files.- PT.AMTINDThe files contains a collection of status data and creation data of the network node.- PT.AMOINDThe files contains a collection of status data and creation data for the section ADMOSS.- PT.LTGINDThe files contains a collection of output messages after input of commands for inquiry of the LTG notebook.- PT.VTINDThe files contains a collection of output messages after input of status commands for the sections: subscriber, port, trunk etc.- PT.X25INDThe files contains a collection of output messages after input of status commands for the section X25.1.1.5、 Further history filesThe following files may exist on the MDD but they are not saved in this procedure.- PW.LOG(ARCHIVE FILE)The