【温馨提示】 购买原稿文件请充值后自助下载。
以下预览截图到的都有源文件,图纸是CAD,文档是WORD,下载后即可获得。
预览截图请勿抄袭,原稿文件完整清晰,无水印,可编辑。
有疑问可以咨询QQ:414951605或1304139763
摘 要
本次设计内容主要是机械加工工艺,工程材料应用,机床夹具设计及金属切削机床等多方面知识。
方套零件的设计主要是由零件加工工艺设计,工序设计和其机床专用夹具设计组成。加工工艺设计主要对零件的作用和零件的工艺分析,设计出其毛坯结构。再由其基面粗基准和精基准的选择来制定出工艺路线,从而确定零件机械加工余量及工序尺寸和切削用量及基本工时。最后进行零件专用夹具,定位分析及基准的选择和切削力和夹紧力的计算以及定位误差分析,从而确定定位元件、加紧元件、机床链接部分和夹具体来设计出夹具。本文主要围绕方套夹具设计为中心,在分析生产零件的基础上设计制造工艺,针对方套的加工工艺确定夹具设计方案。在设计合理,符合工程实际的基础上,设计了3套夹具,并绘制夹具装配图及零件图,完成毕业设计。
关键词:方套、加工工艺、夹具、夹具设计
Square Sleeve’s Machining Process And Its Fixture Design
Abstract
The design content mainly by mechanical processing technology, application of engineering materials, tooling and fixture design of metal cutting machine tool and so on.
Fixture design process design and fixture design of the machine tool. Process analysis of machining process design of the main role of parts and components, design the billet structure. From its base and benchmark crude benchmarks choice to develop process, so as to determine the parts machining allowance and the process dimensions and cutting parameters and the basic working hours. The last part of special fixture, positioning analysis and selection of reference and cutting force and clamping force calculation and positioning error, so as to determine the positioning element to element, machine tool, clamp to link part and fixture design. This paper mainly focuses on the sets of fixture design as the center, the design and manufacturing process based on the analysis of production parts, design scheme of the fixture for processing sleeve. On the basis of reasonable design, accord with the actual engineering, 3 sets of fixture design, fixture and assembly drawings and parts drawing, completed the graduation design.
Keywords:Square Sleeve, Processing technic,Fixture , Fixture design
目 录
1 绪 论 1
1.1 概述 1
1.2 夹具的研究意义 1
1.3 夹具的相关研究现况 1
1.4 本课题的主要研究内容 3
2零件分析 4
2.1 零件的生产类型及生产纲领 4
2.2 零件作用分析 4
2.3 零件的工艺分析 4
2.4 确定毛坯的成形方法 5
2.5 确定铸造工艺方案 6
2.6 确定铸造工艺参数 6
3 机械加工工艺规程设计 8
3.1 基面的选择 8
3.2 确定机械加工余量及工序尺寸 11
3.3 确定切削用量及基本工时 16
4 铣30方槽夹具设计 34
5.1定位分析及基准的选择 34
5.2切削力及夹紧力的计算 34
5.3定位误差分析 35
5.4夹具设计及操作的简要说明 36
结 论 43
参考文献 44
致 谢 45
1 绪 论
1.1 概述
在机械加工制造过程中,用来固定加工对象,使其占有正确的位置,以便接受施工、检测的装置,都可统称为“夹具”。夹具的发展历程,大约可以分为三个阶段:第一个阶段主要表现在夹具与人的结合上,这是夹具主要是作为人的单纯的辅助工具,使得加工过程进一步提高效率和趋于完善;第二阶段,夹具成为人与机床之间的桥梁,夹具的机能发生变化,它主要用于工件的定位和夹紧;第三阶段表现为夹具与机床的结合,夹具作为机床的一部分,成为机械加工任务的加工设备,而任务单的开工时间则根据定单下达日期、任务单计划入库日期、相关的工艺信息以及各加工单元的当前加工计划来统一决定。它主要用于保证产品的加工质量、减轻劳动强度、辅助产品检测、展示、运输等。工件的工艺分析及夹具设计是工艺工程师必备的专业素质。通过完成毕业设计,可以使设计者掌握机械加工的流程,为成为合格工艺工程师打下良好的基础[1]~[5]。
1.2 夹具的研究意义
随着机床加工精度的提高,为了降低定位误差,提高加工精度,对夹具的制造精度要求相应提高。为了适应不同行业的需要和经济性,夹具有不同的型号,以及不同档次的精度标准供选择。夹具的通用性直接影响其经济性,采用模块、组合式的夹具系统只有夹具系统的可重组性、可重构性及可扩展性功能强,应用范围广,通用性好,夹具利用率高,元件的功能强,使得夹具的通用性好,元件少而精,配套的费用低,经济使用才有推广的价值[5]~[8]。