全自动书本打包机的送书装置设计1[含CAD图纸和说明书等资料]
收藏
资源目录
压缩包内文档预览:
编号:21896870
类型:共享资源
大小:1.03MB
格式:ZIP
上传时间:2019-09-09
上传人:好资料QQ****51605
认证信息
个人认证
孙**(实名认证)
江苏
IP属地:江苏
50
积分
- 关 键 词:
-
含CAD图纸和说明书等资料
全自动
书本
打包机
装置
设计
cad
图纸
以及
说明书
仿单
资料
- 资源描述:
-
【温馨提示】 dwg后缀的文件为CAD图,可编辑,无水印,高清图,压缩包内含CAD图的预览图片,仅用于预览,压缩包内文档可直接点开预览,需要原稿请自助充值下载,请见压缩包内的文件及预览,所见才能所得,请细心查看有疑问可以咨询QQ:414951605或1304139763
- 内容简介:
-
全自动书本打包机的送书装置 学生姓名:高武 班级:088105411 指导老师:贺红林摘要:本课题是根据工厂打包书本和自动输送问题我设计的自动打包机的送书装置,该全自动输送装置是利用电机带动滚筒转动,使皮带循环前进,推移书本已达到送书的目的.具有机构简单、操作方便、维修容易、便于运输等优点。目前所有生产线的书本都是由人工打包装箱,以目前的打包方式使整个生产现场显的凌乱,从而影响了整理,整顿,清扫,节约,安全等制度。这个装置目前在新华书店和各大书店都有广泛使用!为此做了以下研究内容:(1)介绍了自动打包机送书装置的研究背景,意义及其目的,通过对参考文献进行详细的分析,阐述了驱动电机,皮带,滚筒等相关内容:(2)在技术路线中,论述了轴的选择和滚筒的选择及其基本参数的选择和几何尺寸的计算,二个主要强度的验算等在这次设计中所需要考虑的一些技术问题做了介绍,(3)绘制了主要零件的工作图和总的装配图(4)给出了一些参考文献,可以用来查阅相关的资料,给我自己的设计带来了方便。关键词: 电机 滚筒 皮带 打包机 指导老师签名:Send automatic book machine/model design Student: Gao Wu class:088105411 Supervisor: He Honglin Abstract: This topic is based on the factory packaging, books and design of automatic transmission problems I send device of automatic baler, the automatic transmission device is to use motor-driven rollers rotating, belt loops, over the book has reached the purpose of sending books. with simple, convenient operation, easy maintenance, easy to transport and so on. All production lines now books are all constructed to package, to packaging of the whole production field of messy, thus affecting the finishing, straightening out, cleaning, saving, safety system. This device is currently using Xinhua Bookstore and bookstore are in General! Do the following content:(1) introduces an automatic machine to send device of background, significance and purpose, through detailed analysis of reference describing drive motor, belts, rollers and other related content:(2) in the technical route, discusses choice of shaft and drum selection and calculation of basic parameters and geometric dimensions, two key strength checking computation of some technical issues to be considered in the design made a presentation,(3) the mapping of a major part of the work and General Assembly(4) references are given, can be used to access related in
- 温馨提示:
1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

人人文库网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。