电力机车受电弓风缸检测拆装装置的设计【含CAD高清图纸和说明书】
收藏
资源目录
压缩包内文档预览:
编号:22808130
类型:共享资源
大小:1.50MB
格式:ZIP
上传时间:2019-11-01
上传人:好资料QQ****51605
认证信息
个人认证
孙**(实名认证)
江苏
IP属地:江苏
45
积分
- 关 键 词:
-
含CAD高清图纸和说明书
电力机车
受电弓风缸
检测
拆装
装置
设计
CAD
图纸
说明书
- 资源描述:
-
【温馨提示】 dwg后缀的文件为CAD图,可编辑,无水印,高清图,压缩包内文档可直接点开预览,需要原稿请自助充值下载,请见压缩包内的文件及预览,所见才能所得,请细心查看有疑问可以咨询QQ:414951605或1304139763
- 内容简介:
-
摘 要电力机车本身不带原动机,靠接受接触电网送来的电流作为能源,由牵引电动机驱动机车的车轮。电力机车具有功率大、热效率高、速度快、过载能力强和运行可靠等主要优点,而且不污染环境,特别适用于运输繁忙的铁路干线和隧道多,坡度大的山区铁路。电力机车的工作原理,接触导线上的电流,经受电弓进入机车后经过主断路器再进入主变压器,交流电从主变压器的牵引绕组经过硅机组整流后,向六台分两组并联的牵引电动机集中供应直流电,使牵引电动机产生转矩,将电能转变为机械能,经过齿轮的传递驱动机车动轮转动。受电弓动作原理:(1)升弓:压缩空气经电空阀均匀进入传动气缸,气缸活塞压缩气缸内的降弓弹簧,此时升弓弹簧使下臂杆转动,抬起上框架和滑板,受电弓匀速上升,在接近接触线时有一缓慢停滞,然后讯速接触接触线。(2)降弓:传动气缸内压缩空气经受电弓缓冲阀迅速排向大气,在降弓弹簧作用下,克服升弓弹簧的作用力,使受电弓迅速下降,脱离接触网。关键词:电力机车 受电弓 气缸 活塞AbstractNon-electric locomotive prime mover itself, by the acceptance of the Catenary current as a source of energy delivered by the traction motor drive the wheels of locomotives. Electric locomotive with power, and thermal efficiency, high speed, overloading strong and reliable operation of the major advantages and do not pollute the environment, especially suitable for heavy transport and tunnel rail link and more, steep slope and the mountain railway. The working principle of electric locomotive, the current contact wire, stood the locomotive pantograph After entering the main circuit breaker re-entering the main transformer, alternating current from the main traction transformer winding through silicon rectifier unit, the two groups of six parallel to the traction motor focus on the supply of direct current to produce torque traction motor, electrical energy into mechanical energy, through the transmission gear-driven locomotive drive wheels turning. Pantograph action principle: (1) bow up: electro-pneumatic valve by compressed air evenly into the drive cylinder, the cylinder piston within the cylinder compression spring bow down, bow or spring at this time so that the next boom rotation, raised his skateboard on the framework and by pantograph uniform increase near the contact line when there is a slow stagnation, and then contact the contact line rapidly. (2) bow down: Transmission of compressed air cylinder valve to withstand the rapid pantograph buffer row into the atmosphere, in the spring bow down under the arch or to overcome the spring force, so that
- 温馨提示:
1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

人人文库网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。