爬墙机器人气压传动系统及控制硬件设计【CAD高清图纸和文档】
收藏
资源目录
压缩包内文档预览:(预览前20页/共33页)
编号:32234557
类型:共享资源
大小:3.49MB
格式:ZIP
上传时间:2019-12-18
上传人:好资料QQ****51605
认证信息
个人认证
孙**(实名认证)
江苏
IP属地:江苏
45
积分
- 关 键 词:
-
CAD高清图纸和文档
机器人
气压
传动系统
控制
硬件
设计
CAD
图纸
文档
- 资源描述:
-
【温馨提示】====【1】设计包含CAD图纸 和 DOC文档,均可以在线预览,所见即所得,,dwg后缀的文件为CAD图,超高清,可编辑,无任何水印,,充值下载得到【资源目录】里展示的所有文件======【2】若题目上备注三维,则表示文件里包含三维源文件,由于三维组成零件数量较多,为保证预览的简洁性,店家将三维文件夹进行了打包。三维预览图,均为店主电脑打开软件进行截图的,保证能够打开,下载后解压即可。======【3】特价促销,,拼团购买,,均有不同程度的打折优惠,,详情可咨询QQ:1304139763 或者 414951605======
- 内容简介:
-
Climbing Robots in Natural TerrainTimothy Bretl, Teresa Miller, and Stephen RockJean- Claude LatombeAerospace Robotics LabRobotics LaboratoryDepartment of Aeronautics and AstronauticsComputer Science DepartmentStanford University, Stanford, CA 94305Stanford University, Stanford, CA 94305tbretl, tgmiller, rocksun- latombeKeywordsMotion planning, climbing, robotics,legged robots, high- risk access, natural terrain.AbstractThis paper presents a general framework for plan-ning the quasi- static motion of climbing robots. Theframework is instantiated to compute climbing motionsof a three- limbed robot in vertical natural terrain. Anexample resulting path through a large simulatedenvironment is presented. The planning problem is oneof five fundamental challenges to the development ofreal robotic systems able to climb real natural terrain.Each of the four other areashardware design,control, sensing, and graspingis also discussed.1 IntroductionThe work described in this paper is part of an effortto develop critical technologies that will enable thedesign and implementation of an autonomous robotable to climb vertical natural terrain. To our knowl-edge, this capability has not been demonstratedpreviously for robotic systems. Prior approaches havedealt with artificial terrain, either using special“grasps” (e.g., pegs, magnets) adapted to the terrainssurface or exploiting specific properties or features ofthe terrain (e.g., ducts and pipes) 1- 12.Developing this capability will further our under-standing of how humans perform such complex tasksas climbing and scrambling in rugged terrain. Thismay prove useful in the future development ofsophisticated robotic systems that will either aid orreplace humans in the performance of aggressive tasksin difficult terrain. Examples include robotic systemsfor such military and civilian uses as search- and-rescue, reconnaissance, and planetary exploration.Many issues need to be addressed before real robotscan climb real, vertical, natural terrain. This paperconsiders five of the most fundamental of these issues:hardware design, control, sensing, planning, andgrasping. One of these issues in particular, the motion-planning problem, is described in more detail. Ageneral framework for climbing robots is presentedand this framework is instantiated to compute climbingmotions of the three- limbed robot shown in Figure 1.Simulation results are shown for the robot in anexample vertical environment.2 MotivationThe results of research in this area will benefit anumber of applications and have implications forseveral related research areas.2.1ApplicationsThis paper is motivated by a need for robotic sys-tems capable of providing remote access to high- risknatural environments.There are many terrestrial applications for thesesystems, such as search- and- rescue, cave exploration,human assistance for rock and mountain climbing, andtactical urban missions. Each of these applicationsrequires climbing, descending, or traversing steepslopes and broken terrain, and thus involves consider-able human risk.Several space applications could also benefit fromthese aggressive robotic systems. For example, sites onMars with potentially high science value have beenidentified on cliff faces 13. Often, it is neitherpractical nor feasible for flying robots to access theseFig 1. A three- limbed climbing robot moving vertically on naturalsurfaces.locations. Therefore, to reach these sites, robots mustclimb, descend, or traverse steep slopes. Future goalsfor exploration on other planetary bodies may requireaccess to equally rugged terrain.2.2ImplicationsIn addition to furthering the development of aclimbing robot for vertical natural terrain, the results ofresearch in this area could provide fundamental insightinto several related research areas. For example, thisstudy could lead to the development of better strategiesfor robotic walking or dexterous manipulation. Humanclimbers often comment on an increase in balance andan expanded range of movement in everyday activityas they become more proficient at the sport. Thisenhanced mobility is often referred to as “discoveringnew degrees of freedom,” and is related to the idea ofdiscovering useful new modes of mobility for ex-tremely complicated humanoid robots or digital actors.Also, the development of planning algorithms forclimbing robots could lead to a better set of criteria forthe design of these types of robots. These algorithmscould be applied to candidate designs in simulation todetermine the capabilities of the resulting robots, andthus to select a design.3 Fundamental IssuesThere are five fundamental issues involved inclimbing steep natural terrain: hardware design,control, sensing, grasping, and planning. A substantialamount of work needs to be done in each of these areasin order to develop a real climbing robot. This sectiondescribes the challenges involved in the first four ofthese areas; the planning problem will be discussed inmore detail in Section 4.3.1Hardware DesignA good hardware design can increase the perform-ance of the robot, and often can make each of the otherfundamental issues easier to deal with. However, pastuse of hardware solutions in maintaining equilibriumgenerally resulted in a fundamental limitation on theterrain that could be traversed.Wheeled robotic systems have been used to ascendand traverse natural slopes of up to 50 degrees, todescend slopes of up to 75 degrees, and to climb oversmall obstacles in rough terrain. These systems eitheruse some form of active or rocker- bogie suspension asin 12, 14- 16, or use rappelling as in 1. Similarresults have been obtained using legged rappellingrobots 3, 17 and a snake- like robot 4.The terrain that these rovers can traverse robustly isimpressive, but none of the existing systems has beenshown to be capable of climbing natural slopes of 90degrees or higher. Wheeled rovers and snake- likerobots have an inherent grasping limitation thatprevents their use in ascending sustained near- verticalor descending sustained past- vertical natural slopes.Existing legged robotic systems do not have thislimitation, but still have bypassed the issue of main-taining contact with the slope by using rappel tethers.Reliance on these tethers prohibits initial cliff ascent,and limits the slope grade on cliff descent to below 90degrees.A wide variety of robots capable of climbing verticalartificial surfaces is available. Most of these robotsexploit some property of the surface for easy grasping.For example, some of these robots use suction cups orpermanent magnets to avoid slipping 5- 8. Others takeadvantage of features such as balcony handrails 9 orpoles 10. However, the surface properties that areexploited by these robots generally are not available innatural terrain.In contrast, the simpler hardware designs used by 2,11 had no such limitations. It is expected thatsolutions to the planning problem such as the onepresented in this paper will allow basic natural verticalterrain to be climbed by similar systems, in addition tothe ducts and pipes climbed by existing systems, andwill suggest design modifications for better perform-ance.Future studies could address the use of other types oftools for grasping vertical natural surfaces, such astools for drilling bolts or placing other types of gear inrock. The use of these tools would allow morechallenging climbs to be accomplished, in the sameway that “aid” helps human climbers 18, 19.However, these tools bring an increase in weight andcomplexity, slowing movement and limiting potentialapplications.3.2ControlThere are three primary components of the controlproblem for a climbing robot: maintenance of equilib-rium, endpoint slip control, and endpoint force control.These three components are tightly related. In order tomaintain balance, both the location of the center ofmass of the robot and the forces from contacts withnatural features must be controlled. Control of slip atthese contacts is directly related to the direction andmagnitude of the contact forces.Existing control techniques such as those based onthe operational space formulation 20 could form abaseline approach to the design of a control architec-ture for a climbing robot. However, these techniquescould be extended in a number of different ways toachieve better performance. For example, futureresearch might address the design of an endpoint slipcontroller that is stable with respect to the curvature ofa contact surface, rather than with respect to a pointcontact only.3.3SensingFor control and grasping, the robot must be capableof sensing the orientation of its body with respect tothe gravity vector, the location of its center of mass,the relative location of contact surfaces from its limbendpoints, and the forces that it is exerting at contactswith natural features. For planning, the robot mustadditionally be able to locate new holds and generate adescription of their properties, possibly requiring ameasurement of levels of slip at contact points. Sensorintegration, in order to acquire and use this informationwith algorithms for control, grasping, and planning, isa challenging problem.Existing engineering solutions are available whichcan lead to the development of a baseline approach ineach case. For example, sensors such as those de-scribed in 21, 22 can provide basic endpoint forceand slip measurements, an inertial unit and magneticcompass can provide position information, an on- boardvision system can provide a rough characterization ofhold locations and properties, and encoders canprovide the location of the center of mass. However,the improvement of each of these sensorsin terms ofperformance, mass reduction, or cost reduc-tionpresents an open area for research.Although the performance of the planning frame-work that will be presented in Section 4 would beimproved with better sensor information, it does notdepend on a perfect model of the environment a priori.Since the framework leads to fast, online implementa-tion, plans can be updated to incorporate new sensorinformation as it becomes available.3.4GraspingThe performance of a climbing robot is dependenton its ability to grasp “holds,” or features on a steepnatural surface. It has already been noted that special-ized grasping schemes, relying on specific propertiesof the surface such as very smooth textures, pegs, orhandles, cannot be used for grasping arbitrary naturalfeatures. The problems involved in grasping naturalholds will be examined further in this section.Traditionally grasp research has been interested ineither picking up an object or holding it immobile (alsocalled “fixturing.”) Research in this subject dates as farback as 1876 it was shown that a planar object couldbe immobilized using a minimum of four frictionlesspoint constraints 23. Good overviews of more recentwork can be found in 24, 25. In this field an impor-tant concept is “force- closure,” defined as a grasp that“can resist all object motions provided that the end-effector can apply sufficiently large forces at theunilateral contacts.” 25 Nearly all research on graspshas focused on selecting, characterizing, and optimiz-ing grasps that have the property of force- closure.However, for the task of climbing a grasp need notachieve force- closure to be a useful grasp. Forexample, a robot may find a shelf- like hold veryeffective for pulling itself up, even though this graspwould be completely unable to resist forces exerted inother directions. For this reason, the techniques forselecting, characterizing, and optimizing grasps mustbe expanded significantly to apply to climbing robots.Characterization involves examining the directionand magnitudes of forces and torques (also calledwrenches) that can be exerted by the grasp. Forexample, for one- finger grasps on point holds, anadequate representation of this information is a frictioncone, which will be used for the planning algorithmdescribed in Section 4.The idea of characterization also encompasses a“quality factor.” Measures of grasp quality have beenresearched extensively and are well reviewed in 26.This work lists eight dexterity measures that includeminimization of joint angle deviations and maximiza-tion of the smallest singular value of the grasp matrix.Other relevant research has been done using theconcept of the wrench space. Using this concept,quality is defined as the largest wrench space ball thatcan fit within the unit grasp wrench space 27. Thevolume of the grasp wrench space, or of morespecialized task ellipsoids, could be used as a qualitymeasure 28. These ideas have been expanded toinclude limiting maximum contact force and applied ina grasp simulator to compute optimal grasps withvarious hands in 3D 29, 30.However, the concept of grasp quality is ill definedfor grasps that do not provide force- closure. Depend-ing on the direction that a climber wishes to go,different grasps may be of higher quality. Furthermore,grasp quality generally includes a concept of securityor stability, and this too is ill defined for non- force-(a)(b)(c)(d)Fig. 2. Four different human climbing grasps, the (a) open grip, (b)crimp, (c) finger- lock, and (d) hand jam.closure grasps. Again, depending on the direction ofapplied forces, the security of a grasp may change. Theconcept of hold quality must be defined before usefuloptimization is possible. Also, an efficient way oftransmitting this information to a controller or planneris necessary to accomplish the climbing task.A qualitative classification of different types ofgrasps already exists in the literature for humanclimbers 19, 31. In this classification, grasps are firstbroken into two categories, those meant for pockets,edges, and other imperfections on otherwise unbrokenvertical rock faces, and those meant for sustainedvertical cracks. Several examples of different face andcrack grasps are shown in Figure 2. The literaturegives a rough idea of the quality and use of each typeof grasp in terms of criteria such as a perceived levelof security, the amount of torque that can be exerted ona hold, and the amount of friction at the “power point.”Not only is this expert intuition qualitative, but alsoit is clear that human climbers need to performadditional grasp planning for specific cases. As put byLong, “There are as many different kinds of holds asthere are ways to grab them 31.” However, thisintuition can be used as a starting point for determiningmeaningful quantitative criteria for grasp selection andoptimization.A comparison of the climbing literature with pastwork on robotic grasp planning reveals several otherfundamental differences between the two applicationsthat may become important in future research. Forexample, many climbing holds are very small, so thefingers used in a climbing grasp often have largediameters relative to the object to be grasped. Litera-ture on robotic grasping primarily considers the casewhere the fingers have small diameters relative to theobject. In addition, some climbing grasps, as men-tioned above and shown in Figure 2, are based onjamming fingers in a crack. This technique is verydifferent from one a robot might use to pick up anobject, and requires a high degree of flexibility andsmall degrees- of- freedom in order to “un- jam” thefingers. Clearly, continued work on climbing robotseventually will lead to the consideration of a wealth ofnew issues in grasping.4 PlanningThe planning problem is the fifth fundamentalchallenge for climbing robots in natural terrain. Detailsof the motion- planning framework presented in thissection are given in 32.4.1ChallengesThe planning problem for a climbing robot consistsof generating a trajectory that moves the robot througha vertical environment while maintaining equilibrium.This problem is challenging even for human climb-ers! Climbing is described by Long as a “singular(a)(b)(c)Fig. 3. Three different human climbing “moves,” the (a) back- step,(b) stem, and (c) high- step.challenge, where each route up the rock is a mentaland physical problem- solving design whose sequenceand solution are unique. Every climb is different 31.”Much of the sequence for a particular route might becomposed of one of a variety of different types of“moves,” such as a back- step, stem, mantel, high- step,counterbalance, counterforce, lie- back, down- pressure,or under- cling. Some of these moves are shown inFigure 3. Each “move” is a learned technique formaintaining balance that may seem counterintuitive. Inaddition to these heuristics, movement through a largenumber of other very specific body positions might benecessary to progress towards the top of a climb.The importance of planning a sequence of movesbefore actually climbing is emphasized by Graydonand Hanson 19, who recommend that climbers“identify and examine difficult sections before theyget to them, make a plan, and then move through themquickly.” The human motivation for this approach isprimarily to minimize the effort required for eachmove and to conserve energy, since most people havehard strength and endurance limits.The planning problem for a climbing robot is quitesimilar. The robot likely will be equipped withactuators that can exert high torques only for shortamounts of time, so planning a sequence of movesbefore climbing is important for a robotic system aswell. Likewise, a climbing robot will be subject to thesame hard equilibrium constraints, and will need toselect between a similarly wide range of possiblemotions. Therefore, the development of a planningalgorithm for an autonomous climbing robot is a verychallenging problem.4.2Related WorkThe search space for a climbing robot is a hybridspace, involving both continuous and discrete actions.Many different methods are available for motionplanning through continuous spaces, including celldecomposition, potential field, and roadmap algo-rithms 33. Discrete actions can be included in thesemethods directly, for example at the level of nodeexpansion in roadmap algorithms, but this approachgenerally leads to a slow implementation that isspecific to a particular system.Previous work on motion planning for legged robotshas developed tools for addressing these hybrid searchspaces for some systems. This work can be categorizedby whether or not the planning is done offline, in orderto generate a reactive gait, or online, in order to allownon- gaited motion specific to a sensed environment.Gaited planners generate a predefined walkingpattern offline, assuming a fairly regular environment.This pattern is used with a set of heuristics or behav-iors to control the robot online based on current sensorinput. Gaited planning was used by 2, 11, forexample, to design patterns for climbing pipes andducts. Other methods such as 34 are based on thenotion of support triangles for maintaining equilib-rium. Stability criteria such as the zero- moment- pointhave been used to design optimal walking gaits 35.Dynamic gaiting and bounding also have beendemonstrated 36- 38. Recent work 39, 40 hasattempted to provide unifying mathematical tools forgait generation. Each of these planning algorithmswould be very effective in portions of a naturalclimbing environment with a sustained feature such asa long vertical crack of nearly uniform width. How-ever, something more is needed for irregular environ-ments such as the one studied in this paper, where thesurfaces on which the robot climbs are angled andplaced arbitrarily.Non- gaited planners use sensed information aboutthe environment to create feasible motion plans online.Most previous work on non- gaited motion planning forlegged robots has focused on a particular systemmodel, the spider robot. The limbs of a spider robot areassumed to be massless, which leads to elegantrepresentations of their free space for quasi- staticmotion based on support triangles 41- 43. Thesemethods have been extended to planning dynamicmotions over rough terrain 44, 45. The analysis usedin these methods breaks down, however, whenconsidering robots that do not satisfy the spider- robotassumption. For example, additional techniques werenecessary in 46, 47 to plan non- gaited walkingmotions for humanoids, which clearly do not satisfythis assumption. To address the high number ofdegrees of freedom and the high branching factor ofthe discrete search through possible footsteps, thesetechniques were based on heuristic discretization andsearch algorithms. This paper considers a robot withfewer degrees of freedom in a more structured searchspace where it is possible to achieve much betterperformance than with these heuristic methods. Similarissues were addressed by 48 in designing a motion-planning algorithm for character animation, althoughthis algorithm was meant to create “realistic,” ratherthan strictly feasible, motion.There is also some similarity between non- gaitedmotion planning for legged locomotion and forgrasping and robotic manipulation, particularly in theconcept of a manipulation graph 24, 49- 51. Bothtypes of planning require making discrete andcontinuous choices.None of these existing planning techniques is suffi-cient to address even the simplest version of theclimbing problem in natural vertical environments, inwhich quasi- static motion, perfect information, andone- finger grasps on point holds are assumed. Theproblem becomes even more complicated if the quasi-static and perfect information assumptions are relaxed,and if more complicated grasps are considered.4.3Planning FrameworkIn this section, we will describe our planningframework in the context of a specific climbing robot,shown in Figure 1. This robot consists of three limbs.Each limb has two joints, one located at the center ofthe robot (called the pelvis) and one at the midpoint ofthe limb. Motion is assumed to be quasi- static (as isusually the case in human climbing) and to occur in avertical plane, with gravity. The low complexity of thisrobots kinematics makes it suitable for studying theplanning of climbing motions.The terrain is modeled as a vertical plane to which isattached a collection of small, angled, flat surfaces,called “holds,” that are arbitrarily distributed. Theendpoint of each robot limb can push or pull at a singlepoint on each hold, exploiting friction to avoid sliding.A climbing motion of the robot consists of succes-sive steps. Between any two consecutive steps, allthree limb endpoints achieve contact with distinctholds. During each step, one limb moves from onehold to another, while the other two endpoints remainfixed. The robot can use the degrees of freedom in thelinkage formed by the corresponding two limbs tomaintain quasi- static equilibrium and to avoid slidingon either of the two supporting holds. In addition,during a step, the torque at any joint should not exceedthe actuator limits and the limbs should not collidewith one another. These constraints define the feasiblesubset of the configuration space of the robot in eachstep. A path in this subset defines a one- step motion.The overall planning problem is the following: givena model of the terrain, an initial robot configurationwhere it rests on a pair of holds, and a goal hold,generate a series of one- step motions that will allowthe robot to move in quasi- static equilibrium from theinitial configuration to an end configuration where onelimb endpoint is in contact with the goal hold.In 32 we presented the details of a framework toaddress this planning problem. This framework can besummarized as follows.First, we presented a detailed analysis of one- stepmotion for the three- limbed climbing robot. Theproperties of the continuous configurations at whichthe robot is in equilibrium were established, and wereused to define the feasible set of robot configurationsat each pair of holds. In particular, it was shown thatthe connectivity of the four- dimensional continuousfeasible space of the robot could be preserved whenplanning in a two- dimensional subspace. This resultreduced the complexity of the one- step planningproblem and led to a fast, online implementation.Then, the overall planner combined this “localplanner” with a heuristic search technique to determinea sequence of holds from the initial configuration tothe goal hold. The heuristic methods were based onobservation of the way in which human climbers plantheir motion.4.4ResultsOur work in 32 presented only one set of simula-tion results, for a particular vertical environment. Thispaper presents a second set of results, for a morechallenging environment. This environment, as shownin Figure 4, contains 50 arbitrarily placed and angledholds. The robot is initially located on the two holds atthe bottom of the environment, and is required to reachthe top two holds.A plan was found in 3.0 seconds using a 450 MHzPowerPC processor, which is typical for an environ-ment containing 50 holds. Planning times for smallerenvironments are on the order of 0.1 seconds.A representative continuous configuration from eachone- step motion in the planned sequence is shown inFigure 5. Many of these configurations are remarkablysimilar to human configurations. For example, theconfiguration shown in Figure 5(a) is similar to the“stem” shown in Figure 3(b). Likewise, Figures 5(i)and 5(n) depict configurations similar to the “back-step” of Figure 3(a) and the “high- step” of Figure 3(c),respectively.Each frame of Figure 5 also shows the equilibriumregion for the current pair of holds on which the robotis standing. This is the region over which the center ofmass of the robot can move while remaining in quasi-static equilibrium without slipping, and is a completespecification of the equilibrium constraint on the robot.Notice that in each configuration shown, the center ofmass of the robot lies within the equilibrium region, asexpected.More results, including animated 3D- visualizations,are available online at /tbretl/.5 ConclusionThis paper described the challenges to developing anautonomous climbing robot and presented a frameworkfor addressing the planning problem.Fig. 4. An example vertical environment for the three- limbedclimbing robot.Current work deals with the application of theplanning framework to a real robotic system, using realhardware. As part of this effort, the framework is beingextended to handle additional motion constraints, morecomplicated robot geometries, imperfectly knownenvironments, and three- dimensional terrain.Future work will address the other four fundamentalissueshardware design, control, sensing, andgraspingand their relationship to the planningproblem.AcknowledgementsT. Bretl is partially supported by anNDSEG fellowship through ASEE and by a Herbert KunzelFellowship. The authors would also like to thank D. Halperin for hishelpful comments.References1 P. Pirjanian, C. Leger, E. Mumm, B. Kennedy, M. Garrett, H.Aghazarian, S. Farritor, and P. Schenker, Distributed Controlfor a Modular, Reconfigurable Cliff Robot, IEEE Int. Conf. onRobotics and Automation, 2002.2 A. Madhani and S. Dubowsky, Motion Planning of MobileMulti- Limb Robotic Systems Subject to Force and FrictionConstraints, IEEE Int. Conf. on Robotics and Automation,1992.3 S. Hirose, K. Yoneda, and H. Tsukagoshi, Titan Vii:Quadruped Walking and Manipulating Robot on a Steep Slope,IEEE Int. Conf. on Robotics and Automation, 1997.4 M. Nilsson, Snake Robot - Free Climbing, in IEEE ControlSystems Magazine, vol. 18, Feb 1998, pp. 21- 26.(a)(b)(c)(d)(e)(f)(g)(h)(i)(j)(k)(l)(m)(n)(o)(p)(q)(r)(s)(t)Fig. 5. Representative steps of the robots motion for the example environment shown in Figure 4. The dark circle in each frame is the center ofmass of the robot. The shaded column is the region over which the center of mass can move while the robot remains in equilibrium.5 J. C. Grieco, M. Prieto, M. Armada, and P. G. d. Santos, ASix- Legged Climbing Robot for High Payloads, IEEE Int.Conf. on Control Applications, 1998.6 H. Dulimarta and R. L. Tummala, Design and Control ofMiniature Climbing Robots with Nonholonomic Constraints,4th World Congress on Intelligent Control and Automation, Jun2002.7 S. W. Ryu, J. J. Park, S. M. Ryew, and H. R. Choi, Self-Contained Wall- Climbing Robot with Closed Link Mecha-nism, IEEE/RSJ Int. Conf. on Intelligent Robots and Systems,2001.8 W. Yan, L. Shuliang, X. Dianguo, Z. Yanzheng, S. Hao, and G.Xuesban, Development & Application of Wall- ClimbingRobots, IEEE Int. Conf. on Robotics and Automation, 1999.9 H. Amano, K. Osuka, and T.- J. Tarn, Development ofVertically Moving Robot with Gripping Handrails for FireFighting, IEEE/RSJ Int. Conf. on Intelligent Robots and Sys-tems, 2001.10 Z. M. Ripin, T. B. Soon, A. B. Abdullah, and Z. Samad,Development of a Low- Cost Modular Pole Climbing Robot,TENCON, 2000.11 W. Neubauer, A Spider- Like Robot That Climbs Vertically inDucts or Pipes, IEEE/RSJ/GI Int. Conf. on Intelligent Robotsand Systems, 1994.12 K. Iagnemma, A. Rzepniewski, S. Dubowsky, P. Pirjanian, T.Huntsberger, and P. Schenker, Mobile Robot Kinematic Re-configurability for Rough- Terrain, Sensor Fusion and Decen-tralized Control in Robotic Systems III, 2000.13 E. Baumgartner, In- Situ Exploration of Mars Using RoverSystems, AIAA Space 2000, 2000.14 R. Simmons, E. Krotkov, L. Chrisman, F. Cozman, R.Goodwin, M. Hebert, L. Katragadda, S. Koenig, G. Krishnas-wamy, Y. Shinoda, W. R. L. Whittager, and P. Klarer, Experi-ence with Rover Navigation for Lunar- Like Terrains, Intelli-gent Robots and Systems, 1995.15 K. Iagnemma, F. Genot, and S. Dubowsky, Rapid Physics-Based Rough- Terrain Rover Planning with Sensor and ControlUncertainty, IEEE Int. Conf. on Robotics and Automation,1999.16 T. Estier, Y. Crausaz, B. Merminod, M. Lauria, R. Pguet, and R.Siegwart, An Innovative Space Rover with Extended ClimbingAbilities, Space and Robotics, 2000.17 J. E. Bares and D. S. Wettergreen, Dante Ii: TechnicalDescription, Results and Lessons Learned, Int. J. of RoboticsResearch, vol. 18, pp. 621- 649, 1999.18 J. Long and J. Middendorf, Big Walls: Chockstone Press, Feb1997.19 D. Graydon and K. Hanson, Mountaineering: The Freedom ofthe Hills, 6th Rev edition ed: Mountaineers Books, Oct 1997.20 O. Khatib, A Unified Approach for Motion and Force Controlof Robot Manipulators: The Operational Space Formulation,IEEE J. of Robotics and Automation, vol. RA- 3, 1987.21 R. Howe, N. Popp, P. Akella, I. Kao, and M. Cutkosky,Grasping, Manipulation and Control with Tactile Sensing,IEEE Int. Conf. on Robotics and Automation, 1990.22 D. Johnston, P. Zhang, J. Hollerbach, and S. Jacobsen, A FullTactile Sensing Suite for Dextrous Robot Hands and Use inContact Force Control, IEEE Int. Conf. on Robotics andAutomation, 1996.23 F. Reuleaux, The Kinematics of Machinery: Outlines of aTheory of Machines. London: Macmillan, 1876.24 A. Bicchi and V. Kumar, Robotic Grasping and Contact: AReview, IEEE Int. Conf. on Robotics and Automation, 2000.25 A. Miller, Graspit!: A Versatile Simulator for RoboticGrasping, Columbia University, Jun 2001.26 K. Shimoga, Robot Grasp Synthesis Algorithms: A Survey,Int. J. of Robotics Research, vol. 15, pp. 230- 266, Jun 1996.27 D. Kirkpatrick, B. Mishra, and C. Yap, Quantitative SteinitzsTheorems with Applications to Multifingered Grasping, 20thACM Symp. on Theory of Computing, 1990.28 Z. Li and S. Sastry, Task- Oriented Optimal Grasping byMultifingered Robot Hands, IEEE J. of Robotics and Automa-tion, vol. 4, pp. 32- 44, Feb 1988.29 C. Ferrari and J. Canny, Planning Optimal Grasps, IEEE Int.Conf. on Rob
- 温馨提示:
1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

人人文库网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。