目录
摘要 2
第一章榨汁机设计前期调查 3
1.2论文的主要内容、研究方法和榨汁机的现状 4
1.2.1论文的主要内容 4
1.2.2论文的研究方法 4
1.2.3我国榨汁机的现状与发达国家的差距 5
1.2.4我国榨汁机的市场调查 6
1.3 榨汁机的设计 8
1.3 .1榨汁机的类型 8
1.3.2 榨汁机的现状分析 8
1.3 .3对新型榨汁机设计的一般要求 9
1.3.4 榨汁机的发展前景 9
第二章离心式榨汁机的总体设计方案 10
2.1 榨汁机方案的比较 10
2.1.1高速离心式果汁机 10
2.1.2 低速挤压式果汁机 11
第三章电机的选择与校核 15
3.1 电动机的选择要求 15
3.2 电动机类型的选择 16
3.3 电动机额定功率的确定 18
3.4 键的强度校核 19
第四章榨汁部件的设计 21
4.1 回转篮的设计 21
4.2榨汁机壳体的设计 22
4.2.1 榨汁机壳体材料的选择 22
4.2.2榨汁机壳体结构的设计 23
第五章榨汁机的使用和保养 26

摘要
随着科学技术的不断发展，农业机械化技术也发展到了一个新的水平；随着农业机械化技术的发展和人们生活水平的提高，水果榨汁机的改进成为目前消费者关心的热点问题。
本文介绍了榨汁机的研究意义、榨汁机的研究现状，分析了榨汁机的发展前景，详细讲述了离心式榨汁机的工作原理。这次和同组人员一起设计的离心式榨汁机能够更独特地更好地满足消费者的意愿，本着简单、方便、实用为原则一切从消费者的利益出发。而且，该榨汁机祛除了以前榨汁机出汁率底、果汁不清的弊端。单相串激式电动机充分体现了自动化、高效化、小型化、简单化、环保化等特点。
最后，我相信我们所设计的这台集专业化、智能化，自动化、，高效化、小型化、简单化、环保化、安全性为一体的榨汁机能够早日走进消费者的家庭。

关键词离心式榨汁机、电机选配、壳体设计、榨汁部件设计

Abstract
In recent years, the rotary digging pile driver has obtained the fast development of our country "but compared with rotary digging pile driver in a foreign country for decades, the development history of domestic rotating drill in key components and core technology, there is still a gap compared with abroad, the development of rotary digging pile driver in China is still a long way to go.
This paper studied the power head as an important item of the rotary digging pile driver host, has been the key components of the host research "the performance is good or not directly affect drilling efficiency" the development of the driver in a foreign country has several ten years of history, the development of the power head has a superior performance!Unique technology and new design concept of "the development of the current domestic power head can meet the construction work of rotary digging pile driver basic reliability and function extension but still need further development.
It is difficult to retrieve the rotary digging pile driver power head system design and development of related literature, no literature at home and abroad and use for reference ", therefore, this topic for power system analysis and research, as important item in the rotary digging pile driver development projects, hope will bring the rotary digging pile driver product development as a reference.
Keywords: rotary digging pile driver, power head, drive way, the driver, the speed reducer
第一章榨汁机设计前期调查及现状

1.1 论文选题的依据和研究意义

春夏秋冬，任何一个季节都有它的独特性，但对于热爱生活的人来说，无论是初夏季节还是如今的严寒冬日，“补水“都变得格外重要。可我们不能一个劲地喝水，而水果天天吃也会腻。何不尝试用榨汁机来榨取一杯新鲜的果蔬汁，既能及时补充水分又自然健康。
不知道有多少人注意到，市面贩售的所谓“果汁饮料”，往往有小字标注“浓缩还原”一水果浓缩液+水+糖+其他元素(防腐剂、色素、增稠
剂等)的勾兑品。此类饮料，原果汁的含量大多在10%到30%左右，不但有大量的糖分和添加剂，而且在加工过程中往往伴随反复的高温杀菌，营养
成分很难真正“保鲜”。
自己动手，用榨汁机调制的蔬菜果汁，好处起码有三点:安全，自由，均衡。无添加剂，随时随地享用，搭配随心所欲，用来做饮料或者煲汤做菜都可以，没有过多的工业流程参与，最大程度上保留了营养成分。
榨汁机由诺蔓·沃克博士(Dr. Norman

图纸汇总.gif

三维图.gif

装配图A0.gif

电机连接轴A3.gif

电机外壳A2.gif

定位环A4.gif

果汁储存杯A2.gif

进料杯A2.gif

内容简介：: 湘潭大学兴湘学院毕业设计说明书题目：高速离心式果汁机的结构设计学院：兴湘学院专业：机械设计制造及其自动化学号： 2010963011 姓名：何源指导教师：高伟完成日期： 2014年6月湘潭大学兴湘学院毕业论文（设计）任务书论文（设计）题目：高速离心式果汁机的结构设计学号： 2010963011 姓名：何源专业：机械设计制造及其自动化指导教师：高伟系主任：刘柏希一、主要内容及基本要求设计一台榨汁机，其主要结构包括：主机、刀片、滤刀网、出汁口、推果棒、果汁杯、果渣桶、顶盖。该榨汁机的设计应满足以下要求：1.电机的选择使用单相异步电动机，功率为250瓦,转速为19000转/分。2.果汁杯容量为500ml。 3.该榨汁机要能渣普通水果，搅拌，打蛋，制奶；投放的食物不能过大、过厚或过硬。4分析榨汁机机工作原理和技术要求及构思方案（含方案比较）。5绘制所设计榨汁机的装配图及主要的零件图。要求图纸工作量2张A0图纸以上（AutoCAD绘图）。6设计说明书一份，电子文档一份。7英文文献翻译（含原文）。要求：原文5000个单词以上，中文翻译要求通顺。二、重点研究的问题1.榨汁机电机的选择。2.榨汁机主机结构的设计。3.榨汁机壳体结构的设计。三、进度安排序号各阶段完成的内容完成时间1查阅资料、调研12周2开题报告、任务书34周3方案，结构原理设计56周4总装配图，零部件图的绘制710周5写出初稿1112周6修改，写出正式稿13周7答辩14周四、应收集的资料及主要参考文献1食品机械设备常用的非金属材料.中国食品产业网，2006年. 2张良成.材料力学M.中国农业出版社，2003年. 3北京农业工程大学.农业机械学(下)M.中国农业出版社,1989. 4肖振金.食品工厂机械与设备M.北京：轻工业出版社,1991年 5同济大学理论力学教研室编.理论力学M.同济大学出版社,1990.6杜朋.果蔬汁饮料工艺学M.北京：农业出版社,1992.131-157 7电机工程手册M.1990年.8谢卫，电工技术杂志，1995年9汪国梁.串激电动机的设计，1990年 10中国农业机械化科学研究院.实用机械设计手册M.中国农业机械出版社,1985年.11沈再春.农产品加工机械与设备M.农业出版社,1993年.12肖振金.食品工厂机械与设备M.北京：轻工业出版社,1991年.13食品机械原理与使用.广东科技出版社，1988年.14 中怡康全国市场监测数据库M.2006年. 湘潭大学兴湘学院毕业论文（设计）评阅表学号 2010963011 姓名何源专业机械设计制造及其自动化毕业论文（设计）题目：高速离心式果汁机的结构设计评价项目评价内容选题1.是否符合培养目标，体现学科、专业特点和教学计划的基本要求，达到综合训练的目的；2.难度、份量是否适当；3.是否与生产、科研、社会等实际相结合。能力1.是否有查阅文献、综合归纳资料的能力；2.是否有综合运用知识的能力；3.是否具备研究方案的设计能力、研究方法和手段的运用能力；4.是否具备一定的外文与计算机应用能力；5.工科是否有经济分析能力。论文（设计）质量1.立论是否正确，论述是否充分，结构是否严谨合理；实验是否正确，设计、计算、分析处理是否科学；技术用语是否准确，符号是否统一，图表图纸是否完备、整洁、正确，引文是否规范；2.文字是否通顺，有无观点提炼，综合概括能力如何；3.有无理论价值或实际应用价值，有无创新之处。综合评价该同学所完成的高速离心式果汁机的结构设计基本原理正确，壳体结构以及传动系统设计合理，电机选择恰当。毕业设计说明书的论述合理，设计计算方法正确，格式符合要求。所绘制的装配图与零件图错误较少，基本达到工程图的要求。该同学具备了一定的专业理论的综合运用能力，正确制定设计方案和解决问题的能力，工程能力，设计能力，计算机制图，及外语能力，具备了工程师的基本素质。整个毕业设计工作体现了学科教学计划的基本要求，所完成的工作达到了本科毕业设计要求，推荐成绩为“及格”，可参与答辩。评阅人： 2010年5月日湘潭大学兴湘学院毕业论文（设计）鉴定意见学号： 2010963011 姓名：何源专业：机械设计制造及其自动化毕业论文（设计说明书） 26 页图表 13 张论文（设计）题目：高速离心式果汁机的结构设计内容提要：随着科学技术的不断发展，农业机械化技术也发展到了一个新的水平；随着农业机械化技术的发展和人们生活水平的提高，水果榨汁机的改进成为目前消费者关心的热点问题。本文介绍了榨汁机的研究意义、榨汁机的研究现状，分析了榨汁机的发展前景，详细讲述了离心式榨汁机的工作原理。这次和同组人员一起设计的离心式榨汁机能够更独特地更好地满足消费者的意愿，本着简单、方便、实用为原则一切从消费者的利益出发。而且，该榨汁机祛除了以前榨汁机出汁率底、果汁不清的弊端。单相串激式电动机充分体现了自动化、高效化、小型化、简单化、环保化等特点。本次设计的主要内容是离心式榨汁机的机械本体设计，主要负责水果榨汁机的壳体的设计。该设计本着简单、方便、实用、安全为原则，在材料上采用了PP材料（聚丙烯）和ABS（工程塑料），设计上弥补了以往各种榨汁机的不足，充分体现了自动化、高效化、小型化、简单化、安全化等特点：简单实用的榨汁机可以让老人和孩子轻松操作而且维护修理特别简单。我相信它在未来的市场上一定很畅销倍受消费者的青睐。在系统研究和总结了前人的成果与经验的基础之上，我采用带有锯齿的切削刀网粉碎，增强切削效果；超细的金属刀网稳定的旋转保证榨汁高效，出汁率高，采用单相串激式电动机用以提高转速、加大扭矩，保证榨汁机榨取果汁的质量，采用盖锁安全保护装置，保证安全，双保证措施让消费者更安全、更省心。指导教师评语该同学所完成的高速离心式果汁机的结构设计基本原理正确，壳体结构以及传动系统设计合理，电机选择恰当。毕业设计说明书的论述合理，设计计算方法正确，格式符合要求。所绘制的装配图与零件图错误较少，基本达到工程图的要求。该同学具备了一定的专业理论的综合运用能力，正确制定设计方案和解决问题的能力，工程能力，设计能力，计算机制图，及外语能力，具备了工程师的基本素质。整个毕业设计工作体现了学科教学计划的基本要求，所完成的工作达到了本科毕业设计要求，推荐成绩为“及格”，可参与答辩。指导教师：年月日答辩简要情况及评语答辩小组组长：年月日答辩委员会意见答辩委员会主任：年月日目录摘要2第一章榨汁机设计前期调查31.2论文的主要内容、研究方法和榨汁机的现状41.2.1论文的主要内容41.2.2论文的研究方法41.2.3我国榨汁机的现状与发达国家的差距51.2.4我国榨汁机的市场调查61.3 榨汁机的设计81.3 .1榨汁机的类型81.3.2 榨汁机的现状分析81.3 .3对新型榨汁机设计的一般要求91.3.4 榨汁机的发展前景9第二章离心式榨汁机的总体设计方案102.1 榨汁机方案的比较102.1.1高速离心式果汁机102.1.2 低速挤压式果汁机11第三章电机的选择与校核153.1 电动机的选择要求153.2 电动机类型的选择163.3 电动机额定功率的确定183.4 键的强度校核19第四章榨汁部件的设计214.1 回转篮的设计214.2榨汁机壳体的设计224.2.1 榨汁机壳体材料的选择224.2.2榨汁机壳体结构的设计23第五章榨汁机的使用和保养26- 摘要随着科学技术的不断发展，农业机械化技术也发展到了一个新的水平；随着农业机械化技术的发展和人们生活水平的提高，水果榨汁机的改进成为目前消费者关心的热点问题。本文介绍了榨汁机的研究意义、榨汁机的研究现状，分析了榨汁机的发展前景，详细讲述了离心式榨汁机的工作原理。这次和同组人员一起设计的离心式榨汁机能够更独特地更好地满足消费者的意愿，本着简单、方便、实用为原则一切从消费者的利益出发。而且，该榨汁机祛除了以前榨汁机出汁率底、果汁不清的弊端。单相串激式电动机充分体现了自动化、高效化、小型化、简单化、环保化等特点。最后，我相信我们所设计的这台集专业化、智能化，自动化、，高效化、小型化、简单化、环保化、安全性为一体的榨汁机能够早日走进消费者的家庭。关键词离心式榨汁机、电机选配、壳体设计、榨汁部件设计AbstractIn recent years, the rotary digging pile driver has obtained the fast development of our country but compared with rotary digging pile driver in a foreign country for decades, the development history of domestic rotating drill in key components and core technology, there is still a gap compared with abroad, the development of rotary digging pile driver in China is still a long way to go.This paper studied the power head as an important item of the rotary digging pile driver host, has been the key components of the host research the performance is good or not directly affect drilling efficiency the development of the driver in a foreign country has several ten years of history, the development of the power head has a superior performance!Unique technology and new design concept of the development of the current domestic power head can meet the construction work of rotary digging pile driver basic reliability and function extension but still need further development.It is difficult to retrieve the rotary digging pile driver power head system design and development of related literature, no literature at home and abroad and use for reference , therefore, this topic for power system analysis and research, as important item in the rotary digging pile driver development projects, hope will bring the rotary digging pile driver product development as a reference.Keywords: rotary digging pile driver, power head, drive way, the driver, the speed reducer 1- 第一章榨汁机设计前期调查及现状1.1 论文选题的依据和研究意义春夏秋冬，任何一个季节都有它的独特性，但对于热爱生活的人来说，无论是初夏季节还是如今的严寒冬日，“补水“都变得格外重要。可我们不能一个劲地喝水，而水果天天吃也会腻。何不尝试用榨汁机来榨取一杯新鲜的果蔬汁，既能及时补充水分又自然健康。不知道有多少人注意到，市面贩售的所谓“果汁饮料”，往往有小字标注“浓缩还原”一水果浓缩液+水+糖+其他元素(防腐剂、色素、增稠剂等)的勾兑品。此类饮料，原果汁的含量大多在10%到30%左右，不但有大量的糖分和添加剂，而且在加工过程中往往伴随反复的高温杀菌，营养成分很难真正“保鲜”。自己动手，用榨汁机调制的蔬菜果汁，好处起码有三点:安全，自由，均衡。无添加剂，随时随地享用，搭配随心所欲，用来做饮料或者煲汤做菜都可以，没有过多的工业流程参与，最大程度上保留了营养成分。榨汁机由诺蔓沃克博士(Dr. Norman Walker)发明于1930年的产品。这位博士因此而闻名于世，被誉为活性果汁机之父。榨汁机主要功能是搅拌、榨汁等，榨出的果汁比买来的果汁营养丰富、味道更佳。因为操作方便、价格便宜、成品新鲜，并可以根据自己的爱好调整饮料成分，使得越来越多消费者选择用榨汁机自制饮料。同样的，老人牙齿不好，营养摄取困难，比起综合维生素药片，鲜榨果蔬汁更加天然，保留营养更全面。1.2论文的主要内容、研究方法和榨汁机的现状1.2.1论文的主要内容本次设计的主要内容是离心式榨汁机的机械本体设计，主要负责水果榨汁机的壳体的设计。该设计本着简单、方便、实用、安全为原则，在材料上采用了PP材料（聚丙烯）和ABS（工程塑料），设计上弥补了以往各种榨汁机的不足，充分体现了自动化、高效化、小型化、简单化、安全化等特点：简单实用的榨汁机可以让老人和孩子轻松操作而且维护修理特别简单。我相信它在未来的市场上一定很畅销倍受消费者的青睐。1.2.2论文的研究方法在系统研究和总结了前人的成果与经验的基础之上，我采用带有锯齿的切削刀网粉碎，增强切削效果；超细的金属刀网稳定的旋转保证榨汁高效，出汁率高，采用单相串激式电动机用以提高转速、加大扭矩，保证榨汁机榨取果汁的质量，采用盖锁安全保护装置，保证安全，双保证措施让消费者更安全、更省心。1.2.3我国榨汁机的现状与发达国家的差距榨汁机在我国的开发应用现状：我国的工业化加工起步于80年代，由于大规模果汁加工设备制造水平低，关键工序核心设备的制造水平与世界水平相差甚远。当时国产榨汁机的主要机型为螺旋榨汁机，其处置率只有60%左右，比国际先进水平低20%多，当时建设的果汁加工厂所用榨汁设备几乎全部进口，机型主要是BUCHER公司的液力通用榨汁机，除价格昂贵、配件费用高外，使用效果比较理想。由于原料生产规模、国内消费水平及企业经济实力等因素的共同影响，加上购买这些昂贵的进口设备，使我国刚刚起步的果汁加工业负重挣扎，步履艰难地维持了15年。再次期间，无论从果汁行业整体规模到设备的制造水平基本处于半停滞状态。进入90年代后，随着我国水果产量的大幅度提高和鲜销市场的逐渐饱和“卖果难”愈演愈烈。另外，由于我国经济实力的增强及人民生活水平的提高，果汁加工业又进入了一个新的发展时期。目前，果汁加工业正向产业化发展，一些规模大、起点高、集团化、面向国际市场的企业正在发展壮大，带动了我国果汁加工业向大规模工业化生产转变。而作为成套生产设备主机的榨汁机的制造水平仍旧很低，国内投资上千万的果汁加工厂的关键设备仍然全部依赖进口。由于具有处理量大、通用性广、出汁率高、产品质量好等优点，BUCHER的液力通用榨汁机及FLOTTWAG和AMOS的带式榨汁机是我国果汁加工厂选用最多的几种机型。据资料显示：在发达国家家庭中与人们日常生活接触最为密切的厨房系列小家电像搅拌机、榨汁机、豆浆机、加湿机等新型小家电产品的拥有率已经达到80%以上而我国还不到10%，可以说：我国小家电正处于成长初期，大有潜力可挖，市场容量巨大，据专业人士预测小家电行业蕴藏着3500多亿元的市场。发达国家生产水果加工机械历史长，基础工业强，技术水平先进，用高新技术装备提高了生产率降低了能源消耗，增加了得率，减少了废弃物，保持了食品营养成分和风味，提高了食品品质。随着经济的不断发展我国市场上也出现了各式各样的榨汁机，但大部分采用的设计理论、设计手段、设计方法、制造技术和检测手段落后；无论是从内在质量还是外观设计都远远不如发达国家。此外，国内许多原材料、基础件质量不稳定，直接影响了产品的整体质量。而且我国生产的水果榨汁机用于工业生产果汁的比较多，家庭实用型的却很少，且从性价比方面考虑也不是很让消费者满意，更主要的是我国目前使用的水果榨汁机通用性差、出汁率低，清汁果肉含量多。因此，要求出汁率高、果汁清家庭实用型榨汁机的研究与开发很受广大消费者的欢迎。1.2.4我国榨汁机的市场调查 21世纪人们对生活的质量不断的提高，对健康和营养的食品要求也就越来越高，特别是2008年奶粉事件和免检产品国家取消以后，很多人对购买的食品都不够放心，经过市场调查表明，现代的人们都形成了自制食品是最安全最卫生这样的观念，同时也享受到生活中的乐趣。每天一杯新鲜的果汁既填补营养也缓解了你一天辛辛苦苦的劳累。果汁不仅能增强您的体质更能让您生命长寿。特别是小孩老人，单单吃水果既不容易消化更吸收不到营养。在近几年来，各个领域的高级白领家庭当中已经陆陆续续出现了榨汁机，随着消费者观念不断的改变，榨汁机将会成为人们每一家庭中必用的饮品食具，所以此类产品将隐藏着巨大的市场份额和发展前景。市场处于导人期同咖啡机、面包机、煮蛋器这些西式小家电一样，榨汁机相对传统的生活必需品而言，更多的价值体现在人们对精致生活的追求上。榨汁机的价格普遍高于200元，一些知名品牌则要在500元左右，因此在中国市场一直都没有得到广泛普及。东菱凯琴董事长助理潘卫东透露，东菱早在上世纪90年代中期就开始生产榨汁机，由于当时国内市场需求较少，几乎都是贴牌出口。直到2000年左右，国内榨汁机市场初具雏形，东菱才开始开拓国内市场。资料显示，目前发达国家平均每户家庭拥有小家电产品超过40种，而在中国的一级城市中，平均每户家庭拥有的小家电数量也不超过5种，且一般多为热水器、吹风机这类生活必需品，榨汁机、咖啡机等“情趣产品”的占有率则更低。苏泊尔有关负责人透露，目前榨汁机在中国家庭中普及率大约只有5。潘卫东说，中国榨汁机市场目前仍处于导入期，一方面因为榨汁机进入中国市场较晚，而更主要的原因是国内消费水平还较低，消费者还没有形成饮用鲜榨果汁的消费习惯。另一专业小家电品牌ACA2003年进入中国市场的，据了解，ACA在中国的主打产品是电烤箱，榨汁机所占份额相对较小，并且目前以出口为主。由于电烤箱的销售旺季在秋冬季节，榨汁机则刚好弥补了企业夏季产品销售的不足。产品性能中国化“西方消费者普遍喜好功能单一而体积较大的产品，而中国消费者则倾向于选择集多种功能于一体且小巧的产品。”潘卫东说 “为了迎合消费者的需求，大多数企业的产品都是融合了榨汁、搅拌、碾磨等功能为一体的综合食品处理器，生产纯榨汁机的企业并不多。” 我们在卖场里看到，只有飞利浦的榨汁机全部为单榨功能的产品，其他几个品牌的产品，如苏泊尔，九阳、龙的，都是附带几个杯体的多功能食品处理器。销售人员透露：“一般消费者使用较多的功能是打豆浆和搅肉馅，单纯为了榨果汁的消费者很少。”然而多功能处理器的刀片更容易磨损，使用寿命要远低于单纯的榨汁机。中国人的饮食习惯也是制约榨汁机市场发展的一大因素。“中国人早餐习惯喝豆浆而不是果汁。”家电卖场的销售人员说，“还有很大一部分消费者则习惯直接食用水果，认为将水果榨成汁饮用既麻烦还流失了营养。”我们了解到，目前榨汁机的消费群体主要有两类：一类是有孩子或老人的庭，孩子容易挑食而老人牙齿不好，自己榨果汁可以满足他们摄入足够的营养；另一类是追求时尚及生活品位的年轻人，榨汁机满足了他们崇尚个性口味的需求。随着生活质量的提高，消费者的心态由最基本的生活需要开始向营养健康的品味生活渡，这为榨汁机更加普及提供了可能。而无论是榨汁机还是食品处理器，目前都处于市场的导入期，对于大多数消费者而言还是奢侈品，企业如何引导消费者的消费观念至关重要。外资品牌遥遥领先根据中怡康2006年2JE全国市场监测数据显示，飞利浦以23、58的占有率在国内榨汁机销量榜上稳居首位。其余进入前十名的品牌皆为国内品牌，除了苏泊尔享有7，1的市场份额之外，其他企业的占有率则都在3 5 。另外，榨汁机杯身材质的不同，在很大程度上影响着价格的高低。杯身的材料一般有塑料和玻璃两种，玻璃材质的机器价格普遍在400500元之间。但记者在采访中了解到，玻璃材质的榨汁机目前并不多见，主要应用在商用机上，家用产品中，只有松下使用玻璃做杯身材料。据潘卫东介绍，目前家用榨汁机的市场更好一些，由于与商用机的区别只在于功率及容积，所以除了普通家庭购买外，很多小型冷饮店、酒吧也倾向于购买小巧便宜的家用榨汁机。据业内专家预测，中国小家电市场前景广阔，今后5年中，每年将有814的增长幅度，市场需求总额将高达35OO亿元。随着人们生活水平的提高，中国榨汁机市场会有很大的市场空间。1.3 榨汁机的设计1.3.1榨汁机的类型目前市场上各种品牌的榨汁机琳琅满目，但绝大多数榨汁机的主要结构、榨汁方式等都相似，通常大都采用外形、容积(搅拌容积或汁液杯的容积)和电机功率进行分类。按外形分，主要有座式、台式和手提式三种，目前以座式和台式榨汁机为主流机种，其实这两类榨汁机的外形比较相似，习惯称为台式榨汁机。按容积分，常见有05、0.6、07、08升等，容积大，一次可榨取的汁液多，但所需的电机功率也大，价格自然就较高。按电机功率分，主要有200W 、230W 、250W 、300W 、350W 等多种规格，普通座式和台式榨汁机常用200300W 的串激电机。1.3.2 榨汁机的现状分析果汁工业化加工在国外已有百年的发展历史，已形成较完备的生产工艺，并开发有多种生产规模大、加工手段先进、产品质量优良的成套加工设备。果汁生产的核心工序是榨汁工序，而榨汁机是榨汁工序的关键设备，榨汁机性能的优劣直接影响和决定着产品的质量、成本和加工企业的经济效益，其作用至关重要。因此，应客观、准确了解各种榨汁机的工作特点，以便做到正确、合理地选用，满足生产要求，以便尽快提高我国榨汁机的应用水平和制造水平,带动果汁加工业的发展,彻底解决种植业的原料加工问题。以下是常用的几款榨汁机：1）双锥盘榨汁机双锥盘榨汁机的榨汁机理是利用两个母线重合的伞状锥体的啮合滚动，使进入啮合区域的果糊受压，果汁通过伞状锥体表面的滤孔排出。但双锥盘榨汁机压榨时作用时间短，对浆状物料的夹持性能差，排汁面积相对较小，排汁孔大，因此不适用于家庭水果榨汁。2）带式榨汁机带式榨汁机的工作原理是利用两条张紧的环状网带夹持果糊后绕过多级直径不等的榨辊，使得绕于榨辊上的外层网带对夹于两带间的果糊产生压榨力，从而使果汁穿过网带排出。带式榨汁机具有结构简单、工作连续、生产率高、通用性好、造价适中等特点，但带式榨汁机的主要缺点是榨汁作业开放进行，果汁易氧化褐变，卫生条件差；排汁不畅；网带孔隙易堵。3）压板式榨汁机压板式榨汁机配置一个工作时旋转的圆柱形机筒，机筒的柱面上开有长缝用于汁液透过，机筒轴心装有一双向丝杠，丝杠上的转动带动机筒两端的圆形压板相向移动。压榨时物料用泵充入机筒内，压板由两端向中间移动挤压机筒内的物料，汁液通过机筒壁上的长缝排出，压榨结束渣从机筒中部的开口排出。但压板式榨汁机的压榨力较小，汁液的透过面积较低。1.3.3对新型榨汁机设计的一般要求目前我国的榨汁机普遍存在着出汁率低、出汁不清等问题，迫切需要进行结构改进和技术提高。因此，新型榨汁机设计必须建立在提高工作效率，增加出汁率，提高果汁质量的基础上对原榨汁机在先前技术上的改进。同时还要尽可能使操作简单满足不同年龄段的消费者，并保证操作的安全性。在经济合理的前提下考虑能够实现综合利用，一机多用。与其他榨汁机产品相比，要求做到坚固耐用，安全可靠，使用维修方便。在满足设计技术要求的前提下，尽可能提高产品和零部件的标准化、系列化和通用化程度。1.3.4 榨汁机的发展前景同咖啡机、面包机、煮蛋器这些西式小家电一样，榨汁机相对传统的生活必需品而言，更多的价值体现在人们对精致生活的追求上。据了解到，目前榨汁机的消费群体主要有两类：一类是有孩子或老人的家庭，孩子容易挑食而老人牙齿不好，自己榨果汁可以满足他们摄入足够的营养；另一类是追求时尚及生活品位的年轻人，榨汁机满足了他们崇尚个性口味的需求。随着生活质量的提高，消费者的心态由最基本的生活需要开始向营养健康的品味生活过渡，这为榨汁机更加普及提供了可能。据国家统计局资料，全国食品工业总产值1995年已上升为全国各行业之首。食品工业的可持续发展必然带动食品机械行业的发展，据统计1999年，全国专业食品加工机械约有2300多种已成机械工业的十大产业之一。据业内专家预测，中国小家电市场前景广阔，随着人们生活水平的提高，中国榨汁机市场会有很大的市场空间。7- 第二章离心式榨汁机的总体设计方案及原理2.1 榨汁机方案的比较2.1.1高速离心式果汁机这是国内市场上最为普遍的果汁机类型，它的工作原理是利用刀网每分钟几千转的高速转动把水果粉碎，强大的离心力使果汁喷流入果汁杯，而果渣则甩进收渣桶。不同品牌型号的高速离心式果汁机也有材质、功率、进料口大小的区别，挑选时要注意选择功率大、进料口大的。优点：水果不用切得很小，榨汁速度快，榨一个苹果或者胡萝卜只需几秒钟，榨出的果汁清亮。缺点：噪音大；出汁率一般，榨完的果渣较湿，有些浪费，对于含水量较少的叶菜类或者特别软的水果几乎榨不出汁来。2.1.2 低速挤压式果汁机这种果汁机也受到很多人的喜爱，它的工作原理是靠内部的一根螺旋杆以每分钟80转的低速旋转，对水果进行挤压、研磨，果汁透过滤网流出，果渣从排渣口排出。优点：噪音低；榨比较脆的水果出汁率高，榨出的果渣很干，不浪费，对于叶菜类的出汁率也能令人满意。缺点：水果需要切成很小的块，再一点一点地填进去榨，费时间；榨出的果汁较稠，里面混有细小的果肉纤维，尤其是比较面的苹果，榨出来几乎就是糊糊。综合考虑，我选择设计高速离心式果汁机。本次设计的是一种集智能化，自动化、高效化、小型化、简单化、环保化为一体的较先进的高速离心式榨汁机。整个装置的动力源采用一个250W的单相串激式电动机，空载转速是19000r/min。2.2离心式榨汁机的工作原理离心式汁机可对果糊产生很高的离心力，可更好地完成水果和蔬菜的榨汁作业。离心榨汁机的主要工作原理是先利用刀片将水果片粉碎，然后利用高速旋转产生强大的离心力来分离果汁和果渣，果汁透过镀钛刀网的金属网经过乘汁坐而流入果汁杯，果渣则被离心力甩出而进入果渣盒，它的工作流程是原料选果清洗榨汁破碎离心过滤果汁和果渣。47- 第三章电机的选择与校核3.1 电动机的选择要求合理的选择电动机是正确使用的先决条件。选择恰当，电动机就能安全、经济、可靠地运行；选择得不合适，轻者造成浪费，重者烧毁电动机。选择电动机的内容包括很多，例如电压、频率、功率、转速、启动转矩、防护形式、结构形式等，但是结合榨汁机的具体情况，需要选择的通常只是功率、转速、等几项比较重要的内容，因此在这里介绍一下电动机的选择要求。电动机类型的选择要从负载的要求出发，考虑工作条件，负载性质、生产工艺、供电情况等，尽量满足下述各方面的要求：1）机械特性由电动机类型决定的电动机的机械特性与工作机械特性配合要适当，机组稳定工作；电动机的起动转矩、最大转矩、牵入转矩等性能均能满足工作机械的要求。2）功率电动机的功率，应根据生产机械所需要的功率来选择，尽量使电动机在额定负载下运行。避免出现“小马拉大车”现象或“大马拉小车”现象造成不必要的损失和浪费。3）转速电动机的转速满足工作机械要求，其最高转速、转速变化率、稳速、调速、变速等性能均能适应工作机械运行要求。4）运行经济性从降低整个电动机驱动系统的能耗及电动机的综合成本来考虑选择电动机类型，针对使用情况选择不同效率水平的电动机类型；对一些使用时间很短、年使用时数也不高的机械，电动机效率低些也不会使总能耗产生较大的变化，所以并不注重电动机的效率：但另一类年利用小时较高的机械，如空调设备、循环泵、冰箱压缩机等，就需要选用效率高的电动机以降低总能耗。5）价格低廉在满足工作机械运行要求的前提下，尽可能选用结构简单、运行可靠、造价低廉的电动机。3.2 电动机类型的选择家用食物加工用器具，如食物拌碎器、碎肉机、水果榨汁机、打蛋机、切片机等要求高起动转矩、高转速、体积小、结构简单，最适宜选用单相串激式电动机驱动。单相串励电动机可以交直两用，故也称为交直两用电动机，励磁绕组与电枢绕组串联，它们通过交流电时，两电流同时改变，电磁转矩方向不变，电机持续运转，其有较软的机械特性，起动性能好，转速高，过载能力强，调速性能较好，但不允许空载起动、换向火花大等，单相串励电动机主要用于电动工具和各种小型日用电器中，这类电动机的特点为额定转速一般超过12000r/min，短时定额或周期工作定额；结构特点为无外壳，而利用器具的外壳防护，电动机的防护型式为IP00，端盖简化成支架形式，通常用铸铝做成，依靠支架上的螺孔安装。电动机的功率一般在30250W之间。输出功率为90W以下，一般为自冷，90W以上采用轴流式风扇冷却。为了降低成本和减小噪音，常采用含油轴承。电动机的轴伸需与主机的驱动部件相配，一般采用斜齿轮轴伸。下表1为家用榨汁机常用单相串激式电动机的技术数据。表3-1 家用食物拌碎器用单相串励电动机技术数据型号电压(V)频率(H2)空载负载测试电压(V)电流(A)转速(r/min)转速(r/min)电流(A)输出功率(W)效率()HCB5420HCB520AHC76-402201202205060502201202200.330.650.722300023000190001500015000100000.601.12.55555250454548HL-2AHL-3AHL-3BHL-4240220220220505050501101101101100.150.30.180.2510000190001400021000105001200010500128000.350.950.450.85单相串激式电动机主要使用在要求转速高（400025000r/vmin）、起动转矩大、且体积小的场合。典型的用途是作为电动工具、拌碎器、吸尘器风机、家用缝纫机、医用离心机等工业机械及日用电器的动力。在结构上，单相串激式电动机一般由端盖、机壳、定子铁心、钉子绕组、换向器、电刷装置、电枢、风扇、转轴等主要零部件组成。通常定子铁心做成凸极形式，多为两极。定子绕组为集中绕组。单相串激式电动机的结构与直流电动机的十分相似，主要的差别在于单相串激式电动机的定子铁心必须由硅钢片叠压而成，而直流电动机的磁场既可以叠压而成，也可以做成整体结构。由于交流绕组存在电抗，在功率、电压及定、转子铁心相同条件下，单相串激式电动机的定、转子绕组匝数比直流电动机的要少。图3-1 HC76-40电动机1）主要技术指标单相串激式电动机主要技术参数包括：额定电压Un（V）、额定功率Pn（W）、额定转速Nn（r/min）、额定频率fn（Hz）、堵转转矩Tk（倍）、堵转电流Ik（倍）、额定电流In（A）、效率（%）、功率因数cos等。单相串激式电动机的主要性能数据见表3-2表3-2 单相串励电动机主要性能功率(W)转速（r/min）6000800012000效率()cos堵转转矩(倍)堵转电流(倍)效率()cos堵转转矩(倍)堵转电流(倍)效率()cos堵转转矩(倍)堵转电流(倍)16420.8624430.9035480.924.572547484052535360562.558569059604581206162607180620.853640.87622506466564370660.82680.8466550684706875070711100单相串激式电动机无论是从机械特性还是经济方面都适合本次设计的要求，因此可选择用HC76-40型号的电动机。电机图如3-1所示3.3 电动机额定功率的确定经与同类榨汁机相比较得出，当榨汁机正常工作，转速n达到8000r/min以上的时候，榨汁机的离心效果明显改善，又查资料知道植物细胞壁的纤维丝抗拉强度为810MPa,将各种不同功率的电动机进行比较，得出结论转矩大于200的电动机符合榨汁机的要求，根据公式3，其中P为功率，单位为W；为转矩，单位为；n为转速，单位为；将以上数据带入得：（3.1）我们可以选择单相串激电动机HC76-40型号，它的功率为250W，在正常工作时，它的转速达到10000r/min，扭矩达到240200,满足使用要求。所以我们选择的电动机的额定功率P为250W。3.4 键的强度校核图示带轮用平键与轴联接（图中只画出了轴与键，未画带轮）。已知轴径d=14mm，平键的尺寸为bxhxl= 5x5x14mm，传递的力偶矩为M=0.24N*m，键的许用剪应力=80MPa，许用挤压应力j=180MPa。图3-2 键的受力图剪切强度校核：（3.2）（3.3）（3.4）挤压强度校核：（3.5）（3.6）（3.7）所以键满足所有强度要求。3.5 轴的强度校核依据设计要求，此电机轴属于心轴，只收到转矩的作用，不受弯矩的作用，故采用心轴校核方式进行校核计算，由以上计算可知：图3-3 轴的受力图T=0.24N*m; P=0.25KW;=600MPa；（3.8）其中T为转矩，P为传递功率，为许用扭矩应力大小，d为轴径大小。得a4373.0a373.4)014.0(2.024.02.010533MPPMNdTWTTT=t （3.9）即可知，轴的强度完全能够满足设计要求。第四章榨汁部件的设计4.1 回转篮的设计榨汁部件的主要组成部分是回转篮。回转篮主要是由金属滤网、切削刀片以及与斜齿轮轴伸相配合的底部的斜齿。我们经过初步实验得出，回转篮上部金属滤网的斜度为的时候，可以很好的将果汁和果渣分离。回转篮的主要作用是在开启榨汁机后，电机带动回转篮高速旋转，榨汁机就是利用回转篮底部的切削刀片将水果片切成小碎片，然后在高速旋转的离心过成中将果渣和果汁分离开来，离心过程中果汁透过金属网进入回转圆腔流入果汁杯，果渣则被甩出回转篮而落入果渣盒中，我们还考虑了金属滤网的强度是否满足要求，以及切削刀片的选择，它与离心外壳的配合和它与电机驱动元件斜齿轮轴伸之间的配合，以及切削刀片的安装问题。图4-1 回转篮图4-2 金属滤网（放大10倍）4.2榨汁机壳体的设计4.2.1 榨汁机壳体材料的选择我们设计顶盖、果汁杯、果渣桶的时候，采用的材料是PP材料，pp材料即聚丙烯，聚丙烯也包括丙烯与少量乙烯的共聚物在内。通常为半透明无色固体，无臭无毒。由于结构规整而高度结晶化，故熔点可高达167。耐热、耐腐蚀，制品可用蒸汽消毒是其突出优点。密度小，是最轻的通用塑料。缺点是耐低温冲击性差，较易老化，但可分别通过改性予以克服。共聚物型的PP材料有较低的热变形温度（100）、低透明度、低光泽度、低刚性，但是有更强的抗冲击强度，PP的冲击强度随着乙烯含量的增加而增大。PP的维卡软化温度为150。由于结晶度较高，这种材料的表面刚度和抗划痕特性很好。PP不存在环境应力开裂问题。PP的熔体质量流动速率（MFR）通常在1100。低MFR的PP材料抗冲击特性较好但延展强度较低。对于相同MFR的材料，共聚型的抗冲强度比均聚型的要高。由于结晶，PP的收缩率相当高，一般为1.62.0%。聚丙烯具有良好的耐热性，制品能在100以上温度进行消毒灭菌，在不受外力的条件下，150也不变形。脆化温度为-35，在低于-35会发生脆化，耐寒性不如聚乙烯。对于聚丙烯玻璃化温度的报道值有一18qC, 0qC, 5等，这也是由于人们采用不同试样，其中所含晶相与无定形相的比例不同，使分子链中无定形部分链长不同所致。聚丙烯的熔融温度比聚乙烯约提高40一50%，约为164一170, 100%等规度聚丙烯熔点为176。由于以上特性，PP材料在食品机械中常用来制造需要承受冲击载荷的食品模具和托盘，具有良好的使用性能。例如，饼干机上的冲压模和辊印模，巧克力浇注成型托盘等。还可以用来制造其他各种饮料器具、容器、离心分离管、泵叶轮等。而设计主机外壳的时候，我们采用了工程塑料ABS，其优点是无毒、无臭、坚韧、质硬、刚性好，在低温条件下抗冲击和机械性能较好，使用温度范围大（-40100），因此应用广泛。设计刀网时采用镀钛刀网，不锈钢特细榨汁网，经过改良设计的不锈钢特细榨汁网，具有良好的刀切效果，效率持久，磨损率低，有效提高出汁率，出汁率达到35%。4.2.2榨汁机壳体结构的设计榨汁机的壳体主要包括推果棒，顶盖，不锈钢刀网，乘汁坐，主机外壳，盖锁，果汁杯，果渣盒。设计这些壳体的时候我们遵守了模具设计准则，同时考虑了模具的设计制造及加工问题。这样更有利于榨汁机的生产，并减少了制造成本。1）顶盖设计榨汁机的时候，我们主要考虑了进料口与回转篮之间尺寸的关系，这样可以使得水果片更彻底的切削破碎，使得物料的离心更加充分；然后我们考虑了端盖与离心外壳的配合问题，这样使得榨汁机的结构更加紧凑，更加家庭化，小型化。榨汁机的端盖和离心外壳构成离心室，分离果汁的离心运动便在离心室中进行，端盖上设有进料口，榨汁前，先将水果切成小片以便可以从进料口进入离心室中做离心运动，将水果片从进料口投入，然后用推料杆将水果片紧压在圆形切削刀片上，刀片将水果片切成碎片，我们称其为物料，这时物料在离心室中做离心运动，由于质量大的离心力也大，故随着离心运动的进行，质量大的随着回转篮想高处运动，然后慢慢的甩出回转篮，落到果渣盒中，而果汁透过回转篮进入到回转圆腔，然后随着离心运动的进行留入果汁杯。至于壁厚我们设计为2mm,这样就可以满足我们的基本要求了。端盖的结构如图所示：图4-3 榨汁机顶盖2）电机外壳电机外壳的作用主要是用来固定电动机，所以设计的时候我们主要考虑电动机部分，在电机外壳的内部我们为电动机设计了一个圆柱形壳体，电动机的固定方式我们才用螺母固定，在电机外壳的内壁顶部我们设有3个螺孔，这样可以更好的保证电机的平稳性。其次我们要考虑的是电机与驱动部件的配合，在电机外壳的顶部开有圆形口，电机轴端由此伸出，在电机轴端安有斜齿轮轴伸，这样就可以与回转篮相配合，达到驱动效果。再者，我们要考虑电机外壳与离心外壳和底座的配合以及盖锁在其上的安装位置，考虑果汁杯和果渣盒的位置，我们将盖锁设计在电机外壳两侧面，与果汁杯和果渣盒位置分开。壁厚仍为2mm,某些局部可能有些变化，但起伏很小，不会影响模具的制造。图4-4 电机外壳 3）果汁储存杯的设计果汁杯和果渣盒的设计则主要考虑生活中的习惯问题，人在拿果汁杯和果渣盒的时候是否很方便，采用曲面方法，适合人体工程学，果汁出口要有一个杯子的高度，使果汁能够顺利流入杯子。设计图如下所示。考虑到环形刀网和刀架与果汁储存杯之间存在相对运动，必须考虑到密封的问题，在杯体和旋转刀架之间嵌入丁腈橡胶圈，解决密封的问题。如图所示。刀架密封圈果汁储存杯图4-5 密封结构设计图4）电动部件电动部件主要是为榨汁机提供动力，有250W单相交流串激式电机、输出轴、电机外壳、底座和电源开关等组成。串激式电机的结构如图1所示。整机由转轴、定子、定子绕组、转子、转子绕组、换向器和炭刷等组成。串激式电机的典型的特点是功率大、效率高、转速随负载力矩变化而变化，当负载减小时，串激式电机转速增加，最高可达19000r/min左右。为避免转速过高造成电机烧坏，一般不允许空载起动，同时也不宜加入太多水果，以免使电机超载而温升过高。4.3 榨汁机的基本结构及其转配4.3.1榨汁机的总体机构布局整机由榨汁机壳体、榨汁部件和电动部件三大部分组成。如图4.1所示。电插板果汁储存杯底座电机顶盖图4-6 榨汁机总体结构一览图4.3.2榨汁机的零件总成及其装配此榨汁机的零件总成为：1、底座2、电机安装座3、电机外壳4、电机轴连接件5、定位环6、刀架及刀网7、果汁储存杯8、 250w单相串激电动机图4-7 榨汁机内部结构视图9、电插板 1）首先将250w单相串激电动机套入电机安装支座并在输出轴端部安装孔配套拧入四对M5的螺钉和弹垫，之后将电机安装座的另一端，转配好榨汁机底座，并拧入4个M3的沉头螺钉，使电机能够稳固在底座上。2）把电机外壳罩入电机，与底座配合，并拧入4个M3的沉头螺钉，使其稳固在底座上。3）套上果汁储存杯，将电机轴连接件套入电机轴，将键敲入键槽，盖上定位环，再配装M5的内六角螺钉和弹垫。4）在果汁储存杯底部嵌入一个丁腈小胶圈，将刀架螺旋拧入电机轴连接件，并使刀架底部稍径向下压紧密封圈，保证密封性能。5）把上盖配合旋入果汁储存杯，至此，榨汁机安装完毕。第五章榨汁机的使用和保养1）使用前，先把切削刀和离心过滤器旋紧，然后把安放离心过滤器和切削刀的上箱紧固在底座上，再接通电源。 2）待电动机起动运转正常后再投入食物。3）投放的食物不应过大、过厚或过硬，以免损坏切削刀和造成电机超载。4）离心笼内不应贮存过多的食物碎末。若碎末过多，应及时清理，否则会引起震动。5）榨汁机要经常保持机身内外清洁。在每次使用完毕之后，要认真加以清洗。但清洗时，切不可用水龙头冲洗榨汁机的下部底座，也不要将其泡在水里，以免影响底座中电器部分的绝缘性能。使用注意事项：1、不应该空转。榨汁机在空载时，其电机转速非常快，很容易造成电机轴磨损从而导致器具损坏。2、应该按照购买时所提供的使用说明书的要求来进行操作和清洁。不能让榨汁机长时间（超过说明书中所规定的时间）工作；不能加工超过说明书规定量的材料；更不能加工除说明书规定外的其它东西。3、不要把整个产品浸入水中进行清洗，应完全按照说明书的要求进行清洁。4、不能自行维修榨汁机器具。榨汁机器具是涉及安全的日用品，消费者在使用过程中如果器具损坏不能正常工作，千万不能自行拆开外壳进行维修。应该等其完全冷却下来，再按说明书的要求进行操作，如果产品仍然不能正常工作，则应停止使用并送维修店或生产厂进行维修。5、在使用时，应该用手固定产品且不要把手伸入容器中，不能让小孩触及工作中的榨汁机器具。6、电源插头应该完全地插入插座中，对带接地的产品，应该与带接地插口的插座连接。参考文献1食品机械设备常用的非金属材料.中国食品产业网，2006年. 2张良成.材料力学M.中国农业出版社，2003年. 3北京农业工程大学.农业机械学(下)M.中国农业出版社,1989. 4肖振金.食品工厂机械与设备M.北京：轻工业出版社,1991年 5同济大学理论力学教研室编.理论力学M.同济大学出版社,1990.6杜朋.果蔬汁饮料工艺学M.北京：农业出版社,1992.131-157 7电机工程手册M.1990年.8谢卫，电工技术杂志，1995年9汪国梁.串激电动机的设计，1990年 10中国农业机械化科学研究院.实用机械设计手册M.中国农业机械出版社,1985年.11沈再春.农产品加工机械与设备M.农业出版社,1993年.12肖振金.食品工厂机械与设备M.北京：轻工业出版社,1991年.13食品机械原理与使用.广东科技出版社，1988年.14 中怡康全国市场监测数据库M.2006年.致谢经过一个多月的忙碌，本次毕业设计已经接近尾声，作为一个本科生的毕业设计，由于我经验的匮乏和知识积累的不足，难免有许多考虑不周全的地方，希望各位老师批评指正！本次设计的整个过程都得到了高伟老师的悉心指导在此表示衷心的感谢。高老师多次询问研究进程，并为我指点迷津，帮组我开拓思路、精心点拨、热忱鼓励。高老师一丝不苟的作风，严谨求实的态度一直是我工作、学习中的榜样；他循循善诱的教导和不拘一格的思路都给予我无尽的启迪。在这次毕业设计过程中非常感谢陈志远同学和黄贤同学的无私帮助。同时还要感谢所有老师对我的教育培养，你们的谆谆教导我会牢记于心。最后，我祝愿所有的老师都身体健康，工作顺利；祝所有的同学都能事有所成。The Honest Guide to Choosing a JuicerIn the 1930s a chap called Dr Norman Walker invented a juicer which firstly grated and then cut produce. The resulting mass was then to be put into a linen bag and placed under a hydraulic press, directing juice down a spout. (Dr Walker lived to 108 years of age - he died in a surfing accident). You can still purchase this 2-stage Norwalk machine for around $2000, which is a very prohibitive price indeed. And most of the juicers you will find on sale havent evolved much since then, which brings us to.Centrifugal juicers. Centrifugal juicers work by using a flat cutting blade on the bottom of a rapidly spinning strainer. Cut produce is flung out over the sides of the strainer. Due to the centrifugal force, juice then passes through tiny holes in the strainer. Features intrinsic to this design include: The strainers are HUGE and a pain to clean The cutting blades are tricky to clean and some are particularly dangerous to handle The process incorporates mass oxidization and therefore a dying and brown juice There is a lot of unpleasant froth Leafy green vegetables are impossible, so no herbs and no wheatgrass Pulp builds up in the strainer and efficiency falls rapidly The centrifugal force pushes a lot of pulp through the strainer, resulting in a lot of pulp in the juice These juicers can seriously damage your hearing, and wont be popular in a terraced house or flat, or if anyone is still in bedUltimately, the technology inside a centrifugal juicer is not unlike that of a tree cutter. Theyre spinning at up to10000rpm. The resulting frictional heat is not good for your juice. Neither is 10000rpm an easy task for a motor when under constant resistance. The amount you can spend on a centrifugal juicer varies from 30 to over 100 - so what are you paying for? Well, in truth, mostly brand name and aesthetic design. While the cheapest of machines are certainly week hearted and not going to last you long, experience and feedback tells us that more expensive machines dont necessarily last any longer. In fact, if everyone who bought a juicer used their machine every day we think nearly every machine on the market would be withdrawn because with daily usage virtually all machines would fail within their first year, let alone within warranty. This guide has been written as a result of the cumulative experience of several people, spanning over 4 years and many many juices. In this guide you will: discover clearly the best type of juicer for you pinpoint the best machine in each category be saved from the confusion of conflicting promotional material benefit from unique comparison charts and photos gain links to background information and in dependant reviewsAnd thats a brave statement for us to make but far braver is the warranty provided with juicers. Most people we speak to that have burnt out previous machines never even took it back. We live in a throw away society sadly, but its great for manufacturers. Another fact of society is how many of us shelve new products. In a recent survey juicers were found to be the most likely new item to be left in the cupboard, second only to the George Foreman style grills. We believe this is because of the above drawbacks of this style of juicer - as the high street centrifugal is by far the most purchased type of juicer in the UK. Centrifugal juicers that handle whole produce. WOW! what a feature, whole apples, whole heads of celery. Having said that, impatience isnt the highest virtue. One health food author tells us its great being able to put in a whole head of celery, but the motor keeps burning out and I have to take it back to the shop. Ultimately, this feature is one of convenience, but the process still destroys the juice, and you still have to clean up after every glass produced as the strainer clog seven more rapidly.The juicers themselves have had no technical redesign other than a widening of their feeding chute, so there has been no consideration of increased motor resistance. Also, a wide feeding chute is extremely dangerous an adult could loose their whole arm in there. Also, anything that doesnt fill the chute rattles all over the place, like a simple carrot. Generally there is immense volumes of foam and the juicers dump a lot of pulp into the juice which then requires straining. How many juicers do you want to buy this year? One last word on whole fruit juicing: animals that live inside fruit. Think about it, even if your juicer can take whole apples, maybe its worth quartering each apple first. worm juice anyone? Centrifugal juicers with pulp ejection. A relatively small market place that holds a few domestic machines, and mostly commercial machines used by juice bars. Juice bars need juice QUICK (which is why they have to sacrifice quality and use the centrifugal process) and they cant afford to continually disassemble their juicer to clean it. In a centrifugal juicer that has pulp ejection, the sides of the straining basket are cleverly slanted, the air flow sending the pulp produced automatically into a collection basket without the need for cleaning. The process IS NOT full-proof by a long way, and offers no inherent improvement on all the flaws of centrifugal juicing already mentioned. Please be aware that stringy, fibrous produce and wheatgrass is still not a success in this type of juicer. If youre looking to incorporate these into your juice read on.A revolution occurred in the 1950s when Plastaket invented the Champion, the worlds first masticating juicer. Masticate means to chew, and as the Champion is the only juicer with teeth we feel its the only masticating juicer available. Many other web sites will class gear juicers as masticators. We have put these into their own category below. The Champion juicer gives a greater yield then centrifugal juicers and the degradation isnt nearly as severe. But its cutter is running at 1425rpm - and that can be a problem. Leafy veg is still a NO - only now it gets caught in the teeth! If you juice slowly (or the teeth are clogged with plant fibers) you get warm foamy juice as the cutter is spinning rapidly against the produce that hasnt yet cleared the juicing chamber. When the Champion arrived on the scene over 50 years ago, Siegfried Gursche, author of Healing with Herbal Juices, described as a tragedy the extremely high speed of the juicer which causes lots of friction which heats and sometimes even steams the juice. Some nutrients, especially all live enzymes, are destroyed by heat. Where the Champion excels (in terms of speed of throughput and yield) is with root vegetables. If youre planning to process A LOT of carrots, then the Champion would be a consideration for you (i.e. the Gerson Diet). Although, in our opinion youd still be better off with a gear juicer, and you should make green juices your main stay. To read more about why the Champion should be nominated for retirement, click here. Now lets take a jump into the 1990s. Suddenly an innovation occurred in juicing.Low speed, gear juicersGear juicers operate anywhere between 70 and 120 r/min. Thus, in a gear juicer: Produce is crushed - No cutting or spinning Enzymes are preserved AMAZING green juices become possible Your juice is cold, as it should be You lift a glass of living juice every time They are the easiest of all juicers to clean (dont let anyone lie to you and claim that any juicer mentioned previously in this guide is easy to clean theyre not).As a visual representation of the differences we have prepared two glasses of apples juice - one prepared in a single gear juicer, the other in a centrifugal juicer. The rapid oxidization of apple juice makes this a good test for the colour and therefore vitality of the juice. Other produce would show similar results for the centrifugal produced juice, but typically the single gear prepared juice would exhibit less or no foam. E.g. orange juice is entirely foam in a centrifugal juicer and zero foam in a single gear juicer. Many people have said or written that you need to drink juice produced in a centrifugal juicer straight after producing it. Usually it is explained that as the juice deteriorates you can benefit from the juice by consuming it straight away. PLEASE stop and think. If a process causes destruction, removing it from your sights quickly does not alter the destruction. If you want to juice for health you must produce the juice yourself in a low speed gear juicer. This is the only way to gain benefit from the abundance of nutrition available in fresh fruits any vegetables when their fibre is safely separated. No other Apple juice extracted with a Single Gear Juicer Has a healthy, even color, showing that its full of enzymes and nutrients 20% more juice yield Less foam Apple juice extracted with a Centrifugal Juicer Has oxidized and turned clear brown -only water content with no enzymes andnutrients Poor juice yield A lot of foam domestic or commercial juice preparation will give you the benefits of living enzymes,vitamins, minerals and other phytonutrients.So now that were totally convinced that its only worth drinking fresh juice if prepared using a gear juicers, weare left with one question - single gear or twin gear?Single gear juicersA single gear juicer has a single rotating screw or auger, with an ever narrowing thread along which produce follows until crushed inside a screen which allows juice through and pulp to be ejected at the tip. This process is very similar to the worm gear of a meat grinder. The auger is divided into a two phase process of first crushing and then wringing-out the produce against the wall of a conical filter screen. Single gear juicing offers you top quality juice with ultimate friendliness of use. You wont ever be put off using a single gear juicer, it will forever remain a joy. In the UK the original Oscar 502 has just been made available again as the Oscar Living Juicer, a machine youll see in juice bars like Planet Organic. There are a hoard of other single gear juicers available now, including the LE quip Visor, Solo Star and Live Please take note that despite superiority claims of the enzyme content produced by different gears juicers, there is NO evidence or test ever been done to identify if one machine is more successful than another in this area. It seems that all promotional material for this type of juicer, including unedited web copy, claims superiority. We would advise not basing your purchase around such statements. Additionally there is no evidence that slower is better (relative to this category, i.e. 70rpm is not better than 120rpm). TRUE, slow speed has immense benefits over thousands of revs per minute, but the small differences in speed between juicers in this category are not cause for you to choose the slowest.Single gear juicing was invented at the beginning of the nineties with the introduction of the Oscar 502, designed and Manufactured by a Korean company named Dong Ah which was founded by two business partners in 1988. One of the two businessmen betrayed the other, set up a nearby manufacturing facility, started a new company called Dong A Oscar (cheeky, hey?) and within a short time had produced the Matstone juicer - a copy of the Oscar design. Outside of Korea the machine was branded the Samson, and globally, Samson agents touted their machine as the new model Oscar. They cut a number of corners to make their Matstone juicers more affordable and pushed heavily with their marketing. In one country, an ex-employee of the Oscar distributor stole $75,000 and the customer database before setting himself up as the Samson distributor. In the UK, where there was no resident Oscar distributorship, the Oscar was long forgotten, many people believing to today that their Samson/Matstone machine is the new Oscar. The story nearly finished with Dong A Oscar falling to bankruptcy on 26th September 2005.Enzyme juicers. These have not proved as efficient or reliable as the Oscar brand. We recommend looking closely at warranty durations, as the Oscar Living Juicer offers 12 years, and only one other machine beats that. Dual stage single auger juicers The latest innovation in single gear juicers is a 3 phase extraction auger working inside a dual stage juicing screen. Upon the initial crushing of the produce, any released juice is directed through the first stage of the juicing screen into the juice collecting bowl. The crushed produce minus much of its juice then continues its way through the machine, where there is a finer holed screen to obtain not only a higher yield, but a near pulp free juice. The picture below compares a dual stage juicing screen (top) with a single stage juicing screen (bottom). Clicking on the picture will show alarger picture. This process is claimed to obtain up to 20% more juice than ordinary single gear juicers and mostly yields like a twin gear machine. A test with carrots yielded 26% more juice! With other single auger juicers, the juice is only produced in the second stage, requiring larger holes in the juicing screen. Consequently a sieve is provided with other single gear juicers covering the juice collecting bowl to catch pulp. As juice is allowed to exit at the first stage this type of juicer doesnt suffer from a number of problems that affect virtually all other juicers: leaks, especially into the locking clip and motor housing (this causes long term problems with the gearbox as fruit acids reach the lubricating grease within the gearbox causing extra noise and eventually a breakage. additionally locking clips / face plates of juicers are tricky to clean and add toyour time). poor performance with soft fruits (soft fruits hold more juice extractable at the first stage. When trying to pass this juice onto the second stage of ordinary single gear juicers, typically nothing happens at all and produce remains stationary in the juicing drum with the juice and all the auger does is stir it).There are only two dual stage single gear juicers available on the market, the Solo Star II and the Oscar 900 VitalMax. Youll note that both brands have been worn on earlier models. We prefer the Oscar VitalMax for a number reasons, including a lighter/sleeker design, as well as being easier to use and clean. Also, both stages of the Oscar juicing screen are stainless steel where as the Solo Star II has a plastic first stage. Lastly, the Oscar VitalMax is the only juicer to hold a 20 year motor warranty. Now that is a brave warranty to implement. Oscar assure us that their machine has been tested beyond 10,000 hours of use. They insist we juice daily, and insist that they use the finest motor and components in the world. Perhaps some tell-tale signs of this quality reside in this machines performance, and quietness, as the VitalMax is most definitely the quietest machine weve used. Since Oscar have been in business since 1988 it is safe to trust their warranty offering too. Single gear juicer with NO juicing screen. The Oscar VitalMax is absolutely the most reliable, best performing, quickest to clean, easiest to assemble and use appliance of its type AND it has the least number of parts - just 4 plus the hopper! There is one single product in this category, the Live Enzyme juicer (which is an electric version of the inexpensive manual juicer known as the Easy Health). Both the manual and electric version were designed for use with greens, particularly wheatgrass exclusively. Due to the very high stringy fibre content of these foods they dont create pulpy juices, and thus a juicing screen is not necessary. However, the absence of a juicing screen on these machines is coupled with claims of juicing all produce and headlining of the time youll save not cleaning the screen. Proceed with caution. You will need to sieve, and softer produce is problematic. Ok if you like pulpy juice, but when you want just pure juice (without the pulp), the pulp quickly collects on the sieve clogging it up. If the sieve was integrated into the juicing drum then separated pulp would be deposited away from he juice, but with a sieve resting on the juice jug you have to empty it frequently and waste a lot of juice in doing so. This is very messy, especially with soft produce, including apples, and tomatoes will lead you to give up hope. Finally, two augers are provided with this juicer for different produce another unique feature. But presuming you require both, at some point you may wish to change the parts to juice the next item in your recipe. Messyagain.Below is a chart of the power (watts) of the 5 most popular single gear juicers. This is an important comparison, because each one of these juicers has a 38mm feeding chute, and thus has the same task to endure. Ultimately, the higher the power, the lower the motor wear of a single juicing task. The power of a machine is exhibited in the juicing performance too, but if you compare this with the warranty chart above you can see exactly what you are getting. People have always thought of the higher price tag equipment as too expensive. but what they dont realize. how many cars do you want to buy in the next 10 years? How many vacuum cleaners do you want to own? How many times do you want to buy a stereo? Or do you want to buy something and be partially dissatisfied with it because every time you use it, it breaks on you? Or do you want to do it once and do it right? After all, you know, you get what you paid for in the sense, not that you pay less money because in the long run you can pay more money. One of the things Ive always thought is that I hate buying junk. Because I end up buying it again. How many of you have bought many of the same product because you never bought a good one?The thing about the Oscar is - it still exists, not just as a legend, but people out there still own their Oscar 502 and its seen them through a decade. Even Dr Gillian McKeith is pictured using an Oscar in her books - shes owned that juicer forever. The Oscar is the juicer of choice of The Juice Master, Rose Elliot, and many many more - people who only want to buy once and get it right so they maintain their image when recommending theproduct to others. Twin gear juicers .So why twin gear? Well, twin, inward rotating gears have traditionally allowed for a greater juice yield. However, assembly is a little more fiddle-some with more parts, the price escalates considerably, and feeding in produce is a slower affair than with single gear juicers. If youve used a centrifugal juicer then a single gear may feel a little slow, but a twin gear will surprise you, as many types of produce have to be forced in between the gears. Basically, a twin gear juicer performs its results by operating its gears at 0.1mm apart, around 4/1000 of an inch. Whilst wheatgrass, herbs, and other leafy produce will self feed as the gears pull inward, a carrot would require force. This is an important note for anyone who has any weakness in their forearms and especially wrists - if youre unable to use a hand trowel in the garden, then sadly a twin gear juicer may be too much for you. This design of twin gear juicers often makes soft produce a challenge. Fruit remains feasible in a twin gear juicer, but juiced alone would require some extra patience. Twin gear juicers always provide a larger holedscreen for fruits. When ever a web site tells you that the gears of their juicer operate closer than anyone elses, please be aware that they all operate at this distance, they all give the same figures and make the same uniqueness claim.Twin Gear juicing was invented by the designer of the current Green Star Juicer (Mr Jong G. Kim of Green Power), which was originally named the Green Life. Massive competition in Korea saw most juicer manufacturers go out of business, including Mr Kim. As Green Power had recently entered the international market, its parts suppliers joined forces to recover the debts of their customer. Simply, they sold off he moulds to Tribest (an American distributor) who have continued to market the machine despite there being no development or after service at source - in Korea. Mr Kim however continued improving upon his design over dozens of models. This tweaking has resulted in their latest offering (some 7 years newer than the Green Star). Under the banner of multiple names, the GPT-1303 is either a Green Power, Kempo or a Hippocrates juicer (slight variations on model number occur for each brand name). All juicers are identical, except that the Green Power is supplied with a video, and the Hippocrates is supplied with the video and with a copy of the Hippocrates Health Programme, written by Brian R. Clement. The latest model Green Power Hippocrates juicer produces approximately 25% more juice from wheatgrass than the Green Star, which it does so in approximately 15% less time, and without constantly backing up (forcing you to stop and reverse - or disassemble, clean and restart). Additionally the machine is smaller, lighter, has two less parts to assemble, is easier to clean, and simply doesnt incur regular part breakages like the Green Star. Below are the twin gears of the two magnetic twin gear juicers. On the left is the Greenstar, on the right the Greenpower Hippocrates. Notice there is no nylon at the front of the Greenstar gears to prevent the metal from colliding. Oddly enough there was in the original design but to simplify and lower the cost of manufacture it was removed. Mr Kim calls this the clean gear and now it is only available on his latest invention. What one cannot see but is massively important is the magnets inside the gears. As the original purpose of magnets was to prevent the gears from colliding they were optimized for each gear to oppose each other - not to enhance the mineral content of the final juice as is now widely accepted as their purpose. Thus, the Hippocrates has an unrivalled magnetic capability, more details of which are below. Excellent global marketing of the Green Star continues to see this as the best known twin gear juicer. We know of dozens of customers who have upgraded from their Green Star - and are now happy with a Hippocrates. Initially concerned that the Hippocrates isnt heavy duty like the Green Star, they quickly realize that the size and weight of their old machine is of no more use than excess weight on a person. We even have customers who have retired their Green Star in favour of the Oscar VitalMax! If your interest is mainly green/non-fruit juices, then twin gear juicers will offer you a great juice and the produce is very easy to feed. Please note however that the Oscar VitalMax juicer offers twin gear performance across all produce types, making the Twin Gear marketplace more of a specialist one. If there is a cheaper, easier to use machine the why should anyone bother with twin gear? The answer is MAGNETS. Yes, there are magnets in the Green Power Juice Extractor. At the core of each rotating twin gear is a series of in-line magnets. When the twin gears are properly aligned, the two series of magnets produce a focused magnetic field of 2600 gauss in the minute 4/1000 inch clearance between the twin gears. As the juice flows through this focused magnetic field, the water molecule clusters within the juice are opened allowing them to recombine with minerals such as calcium, potassium, sodium, and magnesium into new molecular structures. This magnetic field process aids in extracting a greater percentage of minerals from the produce during the juicing process and is instrumental in keeping those minerals in a suspended colloidal form the body can use for a longer length of time. An independent test showed that juice from a combination of celery and green leafy vegetables contained: 95.4% more calcium 173.3% more iron 96.95% more magnesium 61.4% more potassium 205% more silicon 108.2% more zinc Thats it. Thats your reason to purchase Greenpower Magnetic Twin Gear Juice Extractor. The other contenders in Twin Gear juicing are the Twin Health and the Angel. The feature that sets these juicers aside is their 100% stainless steel gears, and auto-reverse function. Please note that neither machine uses magnets in its twin gears and thus ultimately functions like an Oscar VitalMax only with more cumbers ome parts and more expense to you, the buyer. Both the Twin Health and Angel juicers use an embedded control panel rather than sturdy switches. Like in modern cars the number of electric faults not affecting the mechanics but still disabling your machine is frustrating and totally unnecessary. Our final word on the current Angel juicer is that it is being sold on hilarious claims that are badly translated from Korean (where there is no regulation) - vegetable marrow anyone? Thats a courgette or any other member of the squash family - not a secret nutrient you need. The claim goes this type of nutrient plays a significant role in the curing and regeneration of diseased cells in the body. Advertising Standards please. As for removal of pesticides, there has never been any test of this, and the motor warranty duration is disappointing. The Twin Health is physically bigger in every way than the Greenpower Hippocrates, just look at how much bigger its gears are over the Hippocrates! ). The gears of the Angel are bigger still, see below.The Angel has a bit of jaded history, an original inspirer in the juicing market the manufacturer made many mistakes that saw their product vanish from the marketplace until recent re-introduction. The Twin Health is in fact related to the Angel, because the manufacturer took on a lot of Angels research team when Angel had financial troubles. The Twin Health is essentially a plastic re-modeling of an early model Angel no longer available. The purpose of creating a 100% stainless steel machine (not just the gear, but the entire machine) is to create the highest possible level of sanitation. The Twin Health fails miserably on this note with its poorly thought out moldings. If the original Angel were to be available, we would give this a shining report. The machine would also have a price tag of around 1000. The current Angel is a more viable selling option for the manufacturer, with multiple painted and plated parts that eventually cause silver shiny flakes to come off. But this immensity makes a juicer difficult to handle, assemble & clean, and yet it doesnt yield a greater volume of juice. People truly requiring magnetic twin gear produced juice for healing are often week especially in their hands and wrists. Additionally, its gear teeth are totally blunt, compared with the slightly cusped teeth on the Greenpower Hippocrates, so produce is made even harder to feed in. Also, the Hippocrates has a significantly wider chute for feeding produce in - it has a square cross section - and at its widest point is 8mm wider than the chute of the Twin Health - making it noticeably faster and easier to feed in produce. The Twin health gears carry a lifetime warranty (being 100% stainless steel, this is an easy warrantee to uphold). The stainless-on-stainless implementation is not seen as a good idea as it is the stainless-on-nylon implementation of the Hippocrates Juicer that ensures the stainless steel parts never come into contact and pass metal shavings into the juice. The Twin Health marketing material points out that nylon in the gears is less durable and can crack. 选择榨汁机的诚实指南在1930的时候，一个叫做Dr Norman的步行者发明了首先磨碎和然后切开产物的一个榨汁机。得到的大量产物然后被投入一个亚麻制袋子并被安置在一个水压机之下, 指引汁液从下端的壶嘴处流出。(Dr 步行者居住对108 年纪- 他死了在一次冲浪的事故) 。您仍然可以购买这2-stage Norwalk 机器为大约$2000, 的确是一个让人们望而止步的价格。并且您将发现在销售中发现我们购买的大多数榨汁机从那以后并没有发生很大的改变。离心榨汁机运转时，用一把平的切口刀片安装在一台迅速地转动的过滤器的底部。裁减产物是扔在过滤器的边。由于离心力, 汁液然后通过过滤器上微小的孔。这个设计的内在特点有:1过滤器的清洗难度很大。2切口刀片的清洗有一定的危险性。3过程中包含大量的氧化,所以会有一些垂死的和褐色汁。4有很多令人感到不舒服的泡沫。5没有草药和芽草之类的所以绿叶蔬菜是不可能的。6纸浆积存在滤网上并且效率急剧下降。7离心力推了很多纸浆通过滤网,产生了大量的果汁。8这些果汁器能严重地损害你的听力, 也不会受欢迎,因为噪音在梯田的住宅或公寓,没有任何人能睡好。最后, 设计一个离心榨汁机，里面是不同于树木的切削刀的。它们转动在 10000r/min 。收效的摩擦热对您的汁液的不好。当一个马达在持续的抵抗之下10000r/min也不是一件容易的工作。你能在一个离心的果汁器上花费的数量在从30英镑至100英镑，因此你正在支付什么? 实际上, 主要品牌名字和审美设计。而最便宜的机器当然是不被你关注的和你不去持续的渴望,经验和反馈告诉我们更加昂贵的机器不一定会长期地工作下去。事实上, 如果大家买榨汁机并且每天都在使用他们的机器，我们认为几乎每个机器在市场会被撤出因为以每日用法实际上所有机器无法在他们的第一年之内, 让单独在保单之内。在最近一项榨汁机调查中被发现是最有可能留在厨房的新项目. 我们相信,这是由于上述的缺点, 这种风格的榨汁机作为高速离心，是迄今在英国被购买走的类型, 是处理整个的农产品的离心的果汁器。哇! 什么样的特征、整个的苹果, 芹菜的整个头，性能最高并不是最好的。一位保健食品作者告诉我们它的伟大在于它的伟大在于能够把一整头的芹菜榨好, 但电机就会被烧坏了,我们还要把他送到检修部。最后, 这个特点是一个便利, 但过程仍然毁坏汁液, 并且您必须仍然清扫在每块玻璃以后被生产作为过滤器障碍物更加迅速地。果汁器它们自己除了它们的逐渐加宽的滑槽之外还没有技术上的重新设计, 所以一直没有考虑增加运动阻力. 同时,一个宽的逐渐强烈的滑槽极端地危险，一个成人可以将他们的整个手臂放在那里。同时, 不填充滑槽的任何事到处嘎嘎响,像一棵简单的红萝卜。通常有许多大体积的泡沫，而且果汁器倾卸许多果肉进入挤出来的水果来汁液里。你想要今年买多少个果汁器？在整个的果汁上的一个最后的字: 动物会吃很多的水果。想想看,即使你的榨汁机可以榨整个苹果,或许它的价值不值每个苹果的四分之一。大多数商业机器用果汁做酒，相对较小的市场，是一个具有国内少数机器, 酒吧里的果汁要快(这就是为什么他们要牺牲质量和使用离心工艺)，他们要不断地拆开自己的榨汁机是保持清洁。在离心榨汁机，纸浆弹射，双方的紧张篮庇倾斜，气流送浆自动制作成一个篮子收集而不需要清洗。这一进程不能充分证明了漫长的道路，并提供并没改善所有的缺点，离心48%已经讲过。请注意，线状，纤维生产和蓝冰榨汁机也不是一个成功。如果你想找个纳入这些果汁，你要继续看完. 一个革命发生在1950年的时候发明plastaket冠军后,本届锦标赛的第一个咀嚼榨汁机. 当冠军是唯一的榨汁与牙齿,我们感到的只是咀嚼可用于榨汁机. 冠军榨汁机提供了更大的产量,然后离心果汁和退化不严重. 但其刀具运行于1425r/min ,可以说是一个问题。叶菜类青菜仍然是一个没有出现,现在只标出夹在牙齿中! 如果你慢慢榨汁(或牙塞满植物纤维) ,你将得到温暖泡沫汁作为回报。切削刀是金属滤网迅速打击制造那些尚未清除的48%. 当冠军赶到现场, 50多年前,齐格弗里德, 作者疗伤草药汁, 被称为悲剧的极高速的榨汁机,导致地摩擦而争吵,有时甚至出现蒸气的果汁. 某些营养素,尤其是所有活酶,被炸毁的热量. 虽然, 我们认为您还是设计出一个齿轮榨汁机, 但你也应该打造绿色果汁。如低速, 齿轮榨汁机，齿轮榨汁机的转速在70 和120 r/min之间。因而, 在齿轮榨汁机中，产物被击碎，没有切割或转动。酵素被保存。您的汁液是冷的, 因为它应该是合理地压榨。您每次举一杯生存汁液，他们是所有榨汁机中最容易清洗的。如同区别的一个视觉表示法我们准备了二杯苹果汁，一个准备在唯一齿轮榨汁机, 另一个在一个离心榨汁机。苹果汁的迅速氧化做这一个好测试为汁液的颜色和因此生命力。其它产物会显示近似结果为离心被生产的汁液,但典型地唯一齿轮准备的汁液不会陈列较少或泡沫。即橙汁整个地是泡沫在离心榨汁机，而零随地泡沫在一个唯一齿轮榨汁机。许多人说或写道, 您需要喝汁液被生产在一个离心榨汁机，直接以后生产它。通常它是解释, 由于果汁微变,你食用它立竿见影. 请停下来想一想. 如果您要对汁液为健康您必须自己生产汁液在低落速度齿轮榨汁机上。这是获取营养丰盈好处的唯一方法，可利用在新鲜水果里和任何菜里，让它们的纤维安全地被分离。在榨汁机上提取的苹果汁没有营养，而唯一齿轮榨汁机榨出的果汁健康, 颜色显示那是充分酵素和营养素。20% 更多汁液出产量？较少泡沫苹果汁提取与离心榨汁机 ? 。氧化了和被转动的清楚的褐色唯一水含量与没有酵素和营养素 ? 。粗劣的汁液出产量 ? 很多泡沫？国内或商业汁液准备将给您生存酵素的好处, 维生素、矿物和其它物质。如此，即然我们完全说服了那他们，只值得喝新鲜的汁液如果准备使用齿轮榨汁机, 我们左边是以一个问题，唯一齿轮或双胞胎齿轮吗? 唯一齿轮榨汁机：一个唯一齿轮榨汁机有唯一转动的螺丝与一条狭窄的螺纹产物，随后而来直到击碎在允许汁液和黏浆状物质抛出在要诀的屏幕里面。这个过程与肉研磨机的蠕虫齿轮是非常相似。首先击碎，然后绞碎产物，果糊透过滤网流出。唯一齿轮榨汁机提议您一流的质量汁液以最后友善用途。您将不会曾经被推迟使用一个唯一齿轮榨汁机, 这永远将保留喜悦。在英国原物Oscar 502 再制造可利用作Oscar 榨汁机, 一个机器你将会看见在果汁糕里象有机

温馨提示:
1: 本站所有资源如无特殊说明，都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等，如果需要附件，请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸，网页内容里面会有图纸预览，若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间，仅对用户上传内容的表现方式做保护处理，对用户上传分享的文档内容本身不做任何修改或编辑，并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容，请与我们联系，我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

人人文库网所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。