LucisArt滤镜应用实例.doc

第一部分 ： 应用HDR效果到人物相片。这个教程分三部分，我们将重复使用 lucisart滤镜 并应用 HDR效果 在不同类型的图片。在第一个部分里，我们将兴趣关注在人物相片方面。Step 1Open up your image in Photoshop. Ill start with a portrait image I shot. 打开一副人物肖像的相片，不要问我在哪里打开！用什么软件打开！Step 2First thing you need to do is to duplicate the layer (J). Then go to Filter Lucis LucisArt. Here you will need to select the Sculpture option and set it to something like 30. 首先需要先复制图层 CTRL+J , 然后使用滤镜-lucis-lucisart。选择 sculpture (雕刻的意思) 选项，设置参数30.(我感觉就是在做锐化。)Step 3Create a Layer Mask for this layer and fill it with black. This will hide all the effect. Then, take the brush (set to white) and draw over the man and the products he was selling. Leave the trees untouched. 为该层建立一个图层蒙版并填充黑色，它将隐藏所有的效果。然后，将笔刷前景色设置成白色，把人和农作物画出来，不要碰到后面的树叶。Step 4Next I will add a new adjustment layer. Select the curves from the drop-down menu. 下面我将添加一个调整图层，选择 曲线 并将中心点略微向下拉。(注意观察图像的深浅变化)Step 5Now using a black brush, simply draw over the eyes. But do this into the mask that was automatically created. In a portrait it is important that the eyes are not covered by the shadow. They need to be visible. 现在使用一个黑色笔刷，对曲线层蒙版进行修饰，对着眼睛周围的阴影进行修饰，注意不要让笔刷盖到眼睛上。Step 6Next press Command + A to make a selection, go to Edit Copy Merged, and again go to Edit Paste. Then go to Filter Lucis LucisArt and this time select Exposure and set it to 60. Then set the Opacity to 50%.下面按 CTRL+A 全选(苹果上 就是 commnd+a)，然后点 编辑-合并拷贝 然后 编辑-粘贴 (英文版对照原文操作)。然后 滤镜-LUCIS-LUCISART，这次选择 exposure（定时曝光）设置参数 为 60.然后设置不透明度为 50%。Step 7Press Command + A to make a selection over the entire image. Then again go to Edit Copy Merged and Edit Paste. 按 CTRL+A 全选，再次 合并拷贝 & 粘贴。Step 8Now that you have all the layers copied go to Image Adjustments Black And White and play with the settings there. 现在你有了一个合并了所有图层的COPY，执行 图像-调整-BLACK AND WHITE 进行相应调整设置。(这里就是通过各通道来混调图片的灰度效果，降低了红色、蓝色，略微提升了绿色，大幅度提升了CMY三通道的亮度让亮度差更明显，这就是HDR的精髓提高整幅图片的光感。)Step 9Set the layer to Multiply and the Opacity to 40%.设置图层样式为正片叠底，改变透明度至40%.（这个参数不妨记下来，对以后调整此类照片有用。）Step 10Now make a Layer Mask for this layer and erase some of this effect from the eyes using the Brush Tool (B), just as we did in Step 5. 现在为该层做一个图层蒙版，方法参见第五步。Step 11Next you need to press Command + A to make a selection. Then go to Edit Copy Merged and Edit Paste. Then go to Filter Lucis LucisArt and this time use Sculpture set to 20. 然后CTRL+A全选，再编辑-合并拷贝-粘贴，然后执行滤镜-LUCIS-LUCISART 这次使用 雕刻 参数20.Step 12Mask the layer and fill it with black. Now using a white brush, youll need to make visible only a few parts of the image. Youll also need to decrease the opacity of the brush to create the effect gradually. I will try not to draw with the brush over the old mans skin. 继续蒙版该层并添加黑色，使用白色笔刷，降低笔刷不透明度，尽量不要刷在老头的皮肤上。Step 13Next I want to make the image more detailed. Select the Levels setting from the Create New Fill Or Adjustment Layer and set the right slider to left at 192. 下面我想让图片变的更细腻，选择色阶调整将滑块设定在192.（这一步就是为了提亮图片）Step 14Fill the mask that was created automatically with black. Then with a small white brush set to a lower Opacity, draw over the beard, clothes, and some parts of the wood to lighten them up. 对色阶调整层的蒙版填充黑色，然后用(更低透明度的)白色小笔刷，画在胡子、衣服、和木头的一些部分，使之提亮。Conclusion of Part I第一部分的结论For this particular image you can maybe use some filters that help you smooth the skin, but I personally like it as it is. The final image is below and you can view the larger image here. 你也许可以使用其它一些使皮肤变光滑的滤镜帮助。但我还是喜欢它。（点击上图全尺寸观看）Part II - Applying HDR Styling to a Close-Up Image第二部分 - 特写图片中应用HDR效果Next well do another personal photograph that I actually love very much. This is macro photography. The image isnt perfect because I shot it very fast, as the ladybug was flying away. 下面我们将要制作另一类个人摄影，我很喜欢这张图片。这是一张特写摄影，因为我拍摄的很快所以图片并不是很完美，瓢虫有点飞起来的感觉。Final Image Preview for Part II第二部分 完成图 预览！（点击上图全尺寸观看）Step 1Open up the image. 打开图片。Step 2Well use similar techniques that I showed you in Part I, but well use different settings. Also, well place the lights in different places. Start by duplicating the image and go to Filter Lucis LucisArt and select Sculpture set to 25. 我们使用类似第一部分的相同方法，但设置上略有不同，我们将光线放在不同的地方。复制底层，执行滤镜-LUCIS-LUCISART 选择 雕刻 设置参数为 25.Step 3Next go to Create New Fill Or Adjustment Layer and select Curves, and drag the line down a bit. 建立曲线调整层，右下一小点就可以。Step 4Now using the Gradient Tool (G) set to black, lighten the ladybug, as she is our focal point here. Do this in the Layer Mask thumbnail. (基于曲线层蒙版操作)现在我们使用 渐变工具 设置前景色黑色，盖住瓢虫的部分，是为了让瓢虫的部分变亮，因为它是焦点部分，Step 5Next press Command + A to select everything, go to Edit Copy Merged, and then go to Edit Paste. Next, go to to Image Adjustments Black and White and use my settings below, or maybe play with them as you see fit. 每次都要 CTRL+A 然后 编辑-合并拷贝，然后 编辑-粘贴。(翻译这句话不下5遍了 囧) 然后图像-调整-B&W，看着图像进行调整就OK 了！(主要降低了青色和洋红，还是提高光感的反差。)Step 6Next go to Image Adjustments Levels and set it at: 46, 1.79, and 225. Then press OK.下一步 图片-调整-色阶 输入色阶 调整为 46，1.79，225，然后确定。（调色阶这步目的是为了提升黑色，然后将中性灰的颜色提亮，注意到亮部区域了吗？255的位置超出了色阶范围，估计作者也是将它调到有亮部显示的位置。说到底就是通道整体亮度进行调整，希望大家能明白用意。）Step 7Set the layer to Multiply. 将图层模式设为正片叠底。Step 8Make a mask for this layer. Then using the black Gradient Tool (G) set to Radial, lighten the ladybug, as I did below. 为该层设置图层蒙版，然后使用 渐变工具(径向渐变) 前景色设为黑色 ，就像刚才那样加亮瓢虫的部位。Step 9Next press Command + A to select everything, go to Edit Copy Merged, and then Edit Paste. Next go to Filter Lucis LucisArt and set the Exposure to 80. 下面 继续 CTRL+A 全选图层， 编辑-合并拷贝，编辑-粘贴，滤镜-LUCIS-LUCISART 曝光设置为80.Step 10Mask the layer and fill the mask with black. Next using a white brush youll need to draw over the ladybug again to bring some more light on her. 蒙版该层&填充黑色，使用白色笔刷画瓢虫的部分，是它更亮。Step 11Press Command + A to select everything again, go to Edit Copy Merged, and then Edit Paste. Next go to Filter Lucis LucisArt and set Sculpture at 10. 然后再次CTRL+A 全选， 编辑-合并拷贝，然后编辑-粘贴。滤镜-LUCIS-LUCISART 选择 雕刻(参数10)。Step 12Mask it and using a black brush, cover the background behind the hand. 蒙版该层使用黑色笔刷，覆盖手后面的背景区域。（这步是对背景进行修饰了）Step 13Last step is to go to Create New Fill Or Adjustment Layer and select Levels. For the Levels use 0, 1.00, 197 and then press OK. 最后的步骤了，建立色阶调整层 参数如下 0 1.00 197 然后OK 。（把色阶的亮部拉到正常的位置，提升一点点亮度，是这步的目的！）Step 14Mask the layer and fill it with black. Then with a small white low Opacity brush, simply draw over the ladybug to make her more detailed. Try not to draw all over her, just a few parts to make them pop out. 蒙版该层填充黑色，然后用（低透明度的）白色小笔刷，简单的刷刷小瓢虫让它更细腻，不要完全把它画上，只是一点点的突出。（如过你注意点会发现，瓢虫翅膀上的光减弱了一点点。很细腻的局部调整！）Conclusion of Part IIThis effect is something I personally use. You can experiment with the filter and get a lot of different effects. The final image is below and you can view the larger image here. 第二部分总结，你可以用滤镜去试验其他一些不同的效果，点击HERE看大图。（根据LUCIS官网的介绍，LUCIS对光的调整相当的强悍！国内很少讲关于LUCIS的教程，希望高手们多多利用该滤镜实现完美的HDR效果）Lucisart滤镜制作夕阳下的美女手绘效果效果图：原图：1、打开原图素材，把原图复制一层，创