




已阅读5页,还剩9页未读, 继续免费阅读
版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
加强国有企业内部控制之我见 加强国有企业内部控制之我见(19000字) 摘 要:本文强调指出内部控制体系对于企业发展的重要意义,以国有企业的内部控制为写作对象,结合中海运集团、三鹿集团、国有航空企业、秦岭水泥等案例事件从COSO框架提出的内部控制五个方面即控制环境、风险评估、控制 .加强国有企业内部控制之我见(字)摘 要:本文强调指出内部控制体系对于企业发展的重要意义,以国有企业的内部控制为写作对象,结合中海运集团、三鹿集团、国有航空企业、秦岭水泥等案例事件从COSO框架提出的内部控制五个方面即控制环境、风险评估、控制活动、信息系统与沟通和监控出发,分析了我国国有企业内部控制现状问题,然后找到形成问题的原因,进而从问题入手,提出对应于问题的健全内部控制环境、加强风险管理、合理设置控制活动、完善信息沟通系统和强化监督机制五个大方面的加强我国国有企业内部控制的措施。关键词:控制环境;风险管理;控制活动;信息沟通;监督Strengthening State-owned Enterprise Internal Control Abstract:This paper emphasizes the internal control system is an important significance to the development of the enterprise, the internal control to state-owned enterprises for writing object, combined with the case events from cnooc group proposed COSO internal control framework of five aspects, the controlling environment, risk assessment, control activities, information system and communication and monitoring, analyzes the existing problems in state-owned enterprise interior, and find the reason of the problem, and then formed from problems, take the corresponding to reason sound internal control environment, enhancing risk management, setting up reasonable control activities, improve information communication system and strengthen supervision mechanism proposed to strengthen the five big state-owned enterprise internal control measures. Keywords: control environment;risk management;control activities;information communication;supervision宠物犬常见传染病的调查与分析(7900字) 摘 要:本文对湘潭市宠物医院犬类传染病的临床病例进行了调查,主要分析了各种犬传染病的构成比、预防接种情况、死亡率、治疗效果等。结果表明,143例犬传染病均未接种疫苗,其中发生细小病毒病的比例最高(70.6%),犬瘟热病次之(19.6%),犬传染性肝炎病最小(9.8%);经治疗犬瘟热病和犬细小病毒病的死亡率仍保持在高的水平,分别为89.28%和30.69%,其中≥2月龄的病犬死亡率均为100%;三种治疗方案中,相对而言以单抗和三联血清联合使用的效果最好。因此,加强犬的疫苗接种仍是防治犬传染病重要手段。关键词:犬;传染病;细小病毒;犬瘟热;传染性肝炎;Survey and analysis of pet common infectious diseasesAbstract: The clinical cases of infectious diseases in dogs from Xiangtan City Pet Hospital were investigated for the composition of various infectious diseases, vaccination situation, mortality,and treatment effects in the study. The results showed that 143 cases of infectious diseases in dogs were not vaccinated, which took the highest proportion of parvovirus infection (70.6%), followed by canine distemper disease (19.6%) and canine infectious hepatitis (9.8%). The mortality rates of canine distemper and canine parvovirus disease after clinical treatments remained at high levels, respectively in 89.3% and 30.7%, and were 100% for ≥ 2-month-old dogs. Treatments in combination of monoclonal antibody with the serum antibody were the best among three treatment programs relatively. Therefore, strengthening for the dogs vaccination is still an important means of prevention and treatment of infectious diseases in dogs. Keywords: dogs;Infectious diseases;parvovirus;Canine Distemper;Contagious hepatitis; 上市公司应收账款质量问题研究(字)摘 要:应收账款是指公司销售产品或提供劳务,应向购买方或接受劳务方收取的款项。应收账款质量是指企业应收款项能转化为货币资产的能力。应收账款质量与企业的收益质量、企业业绩、企业成长性等都有很大的相关性。应收账款质量是影响企业业绩和主营业务盈利质量的重要因素。因此本文以湖南所有符合条件的上市公司为研究对象,利用应收账款质量的有关评价指标, 分析了湖南上市公司2008年至2010年三年间应收账款质量的变化趋势和现状,并且分析产生这些现状的原因,并提出改善湖南上市公司应收账款质量的对策。关键词:湖南上市公司;应收账款质量;应收账款; Study On The Quality Of Accounts Receivable In Listed Companies Abstract:Accounts receivable is a company selling products or services, or the receipt of services should be purchased and collected money. Quality is an enterprise accounts receivable accounts receivable can be converted into the ability of monetary assets. The quality of accounts receivable and the quality of corporate earnings, business performance, business growth and others have great relevance. Affect the quality of accounts receivable is the main business profit performance and the quality an important factor. This article Hunan all eligible listed companies for the study, use of accounts receivable related to the quality of evaluation, analysis of Listed Companies in 2008-2010 three-year trends in the quality of accounts receivable and the status quo, and Analysis of the status quo because they have to make to strengthening of listed companies in the quality of accounts receivable. Key words:Listed companies in hunan; The quality of accounts receivable; Accounts receivable摘要变频调速技术已经成为节能和提高产品质量的有效措施。低压变频器技术已经成熟,但高压变频器目前还没有一个统一的拓扑结构,在众多解决方案中单元串联多电平高压变频器以其在输入与输出谐波、效率和输入功率因数等方面明显的优势,在实际应用领域中占有一席之地,特别在风机、泵类的行业具有良好的市场前景。本文主要介绍单元串联多电平6KV高压变频器的仿真研究。具体的工作主要有以下两个方面:概述了高压变频器的国内外技术发展及趋势,对高压变频器各种类型的优缺点进行了分析,并通过该分析确定了单元串联多电平高压变频器为本设计的可行方案。阐述了单元串联多电平移相式PWM电压源型变频器原理,通过对原理的阐述,进一步透彻的掌握单元串联多电平高压变频器的内部特性。基于MATLAB/Simulink对6KV高压变频器进行建模与仿真研究,完成了对脉冲信号、单元电路、一相、三相和变频器系统的建模工作,并通过仿真,证明了单元串联多电平高压变频器在消除谐波问题上具有很大的优势。由仿真电流波形可以看出,在没有专门的滤波电路的情况下,其电流波形的正弦度已非常高,变频器的线电压共有21个阶梯,其正弦度比相电压更好,变频器的线电压谐波含量非常低,其含量最高的为10次谐波,其幅值为基波的1.%。 关键词:单元串联,多电平,高压,MATLAB/SimulinkSimulation Research of Frequency ConverterBased on MATLAB/SimulinkAbstractThe technology of frequency conversion and velocity adjustment has already become an effective method of both saving energy and improving product qualityThe low-voltage frequency converter technology is already mature,but the high-voltage converter has not got a universal topology structure at presentAmong the numerous solutions,cell series multi-level high-voltage frequency converter technology,depending on its obvious advantages in input and output harmonic,efficiency,input power factors etc,has occupied a share in market,especially,it has good market prospect in fan and pump industriesThis report mainly introduces the simulation research of cell series multi-level 6KV HVF(high voltage frequency)The concrete content consists of the following aspects:The development and trend of HVF technology,the requirements both in domestic and abroad market for HVF are reviewedThe advantages and disadvantages of different HVF types are analyzed in detail,and therefore,the scheme design is proposed based on this analysisThe basic principle of cell series multi-1evel PWM converter is described hereThe description thoroughly illustrates the internal traits of cell series multi-level HVF Based on MATLAB/Simulink,the modeling and simulation research of 6KV complete the modeling of the pulse signal,cell circuit,one-phase,three-phase and the frequency converter systemBy simulation research,it is proved that the cell series multi-level HVF has got great superiority on eliminating harmonicsShown by the simulation current waveform,without special filtrating circuit,the sine of its current waveform is already very high. The line voltage of the frequency changer owns 21 steps,and its sine value is better than phase-voltage,also the harmonic content of the frequency converter line voltage is very low,which the largest value is 10 harmonic waves,its amplitude value counts 1.% of a fundamental waveKey words:cell series, multi-level, high voltage , MATLAB/Simulink毕业设计研究工作高压变频器的开发是一项复杂的项目,其主要内容包括变频器的控制系统和变频器主电路的设计两大部分,它涉及到电机控制理论,多CPU运行,现场总线,大规模可编程逻辑电路,通信协议,电力电子技术等,是多学科、高技术的综合。从方案的生成到产品的调试直至产品的应用是一个较长的开发周期,需要大量的人力、物力。本次设计主要在于相关的高压变频器的仿真研究。完成的具体内容是:对整个高压变频器以及调速系统进行仿真研究,变频器模型的建立,包括控制脉冲模型、三相电源模型、功率单元模型、一相模型以及变频器的模型。然后对各个模型进行仿真和试验数据分析。 中国新能源汽车的市场发展前景的分析(选题审批表,任务书,开题报告,中期报告,毕业论文字)摘 要:近年来,新能源汽车的发展已经逐步被全世界所广泛关注,新能源提倡的绿色环保成为当今社会的主流趋势。但是新能源汽车的发展前景到底如何,仍然引起了巨大的争议。本文首先分析了新能源汽车市场的发展机遇,接着分析了新能源汽车市场的潜在经济效应,以及其市场供求状况,然后得出了新能源汽车市场前景广阔的结论。关键词:低碳经济;支柱产业;汽车保有量;Analysis of Market Developing Tendency of Chinese New Energy VehiclesAbstract: In recent years, the development of new energy vehicles have gradually been widespread concern in the whole world, the new green energy advocates became the main trend of society today, but regarding to the future of the new energy vehicles aroused widely controversy. This paper firstly analysis the developing chance of new energy vehicles market, then analysis its potential market economic impact and basic condition of market supply and demand At last ,concluded that the new energy vehicles have brightly future of its development market. Keyword: low-carbon economy; pillar industry; vehicle holdings;内容简介本设计为框架结构办公楼结构设计,共六层,建筑面积3600m 左右。设计分为两部分:第一部分是建筑部分,包括对建筑的平面设计、建筑立面设计、建筑剖面设计、建筑构造做法等。本设计采用了大空间结构,这样更能符合使用者的需求,充分体现建筑的功能。第二部分为结构设计,包括框架梁、板、柱的设计以及楼梯设计等。本设计的结构采用框架承重体系,墙体采用蒸压粉煤灰加气混凝土砌块,有利于减轻建筑物自重;其中对框架梁、柱、板的设计都采用了弹性理论方案。设计为抗震设计,因此设计过程中还进行了地震作用下弹性位移验算。设计后达到了强度、刚度和稳定性方面的要求。 关键词 框架 混凝土 抗震 刚度 文件组成及目录 开题报告、任务书、答辩申请表、正文(共96页)、图纸(共15张,PKPM+CAD图) 目录及介绍/开题报告.DOC(word文件)/任务书.DOC(word文件)/答辩申请表(word文件)/ 计算书:目 录摘 要 IAbstract II第1章 绪论 11.1选题意义 11.2工程概况 11.2.1工程位置 11.2.2地形 11.2.3工程情况 11.2.4抗震条件 21.3本文主要研究内容 21.4设计目的 2第2章 设计总说明 32.1建筑设计说明 32.1.1建筑总平面设计 32.1.2建筑平面设计 32.1.3建筑立面设计 52.1.4建筑剖面设计 62.1.5建筑构造 72.2结构设计说明 82.2.1框架的承重方案 82.2.2梁、柱截面尺寸确定 82.2.3框架结构计算简图 82.2.4结构计算 8第3章 结构计算书 93.1工程概况 93.2结构布置及计算简图 93.3重力荷载计算 123.3.1屋面及楼面永久荷载标准值 123.3.2屋面及楼面可变荷载标准值 123.3.3梁、柱、墙、窗、门重力荷载计算 123.4框架侧移刚度计算 173.5横向水平荷载作用下框架结构的内力和侧移计算 18 3.5.1横向水平地震作用下框架结构的内力和侧移计算 183.5.2横向风荷载作用下框架结构内力和侧移计算 233.6竖向荷载作用下框架结构的内力计算 273.6.1横向框架内力计算 273.6.2横向框架内力组合 353.7截面设计 493.7.1框架梁 493.7.2框架柱 513.8楼梯设计 543.8.1梯段板设计 553.8.2平台板设计 553.8.3平台梁设计 563.9屋(楼)面板设计 583.9.1板配筋设计 583.10基础设计 593.10.1地基承载力特征值 593.10.2确定 的基底尺寸 593.10.3设计 柱基础 61结论 64致谢 65参考文献 66附录1 67附录2 71 / 建筑图:建施01:建筑设计总说明.dwg(cad文件)建施02:一层平面图.T(PKPM文件)建施03:标准层平面图.T(PKPM文件)建施04:顶层平面图及.T(PKPM文件)建施05:I-I剖面图.T(PKPM文件)建施06:正立面图.dwg(cad文件)建施07:背立面图.dwg(cad文件)建施08:屋面排水.T(PKPM文件)/结构图:结施01:结构设计总说明.dwg(cad文件)结施02:框架配筋图.T(PKPM文件)结施03:标准层结构平面图.T(PKPM文件)结施04:顶层结构平面图.T(PKPM文件)结施05:基础平面布置图及配筋图.T(PKPM文件)结施06:楼梯结构布置图及配筋图.T(PKPM文件)结施07:梁配筋图.T(PKPM文件)/ 摘要本毕业设计遵循先、后结构、再基础的设计过程,根据任务书和指导书的要求,完成桂林晨华综合办公楼(钢筋混凝土框架—剪力墙结构)的、结构设计。建筑图包括总平面图及说明,首层、标准层和屋顶平面图,正立面和背立面图,楼梯和电梯井的剖面图,以及若干详图。各图均按规范要求设计。本工程结构设计时密切结合建筑设计,力求经济合理,在框架结构体系中适当布置钢筋混凝土剪力墙,作为抗侧力构件与框架协调工作,使结构具有良好的抗震性能。结构分析的重点在于框架和剪力墙的协同工作分析。考虑毕业设计的特殊要求,以手算为主、电算为辅。结构设计包括以下七个部分:结构刚度计算;水平地震作用效应分析;竖向荷载作用下框架和剪力墙内力计算;荷载效应组合;截面设计与配筋计算;楼梯设计;梁板设计。计算书的主要内容有:完成现浇楼板局部单元板的设计(包括手工进行荷载计算、内力分析及配筋计算,电脑绘出施工图);根据建筑要求完成其它楼层结构布置,应用SATWE程序进行电算,并在结构布置施工图中,应用平法表示标出梁、板、柱和框架的编号、板厚及配筋;人工计算完成框架—剪力墙结构协同工作分析、结构侧移计算、剪力墙受力分析与截面设计、框架受力分析与截面设计(包括内力分析、水平荷载与竖向荷载的计算和组合、截面配筋并绘制施工图);应用设计软件完成分析、设计,对比分析电算和手算的主要成果。 毕业设计的成果符合现行规范的要求,因而是合理可行的。关键词: 高层建筑;钢筋混凝土结构;框架—剪力墙结构;综合办公楼;建筑与结构设计Abstract: This graduation project follows and builds, and then structure, more basic design process first, according to the request of task book and guide book, finish the building design and structural design of reinforced concrete frame - shearwall structure’s Guilin chenghua comprehensive building.The construction drawing of the building including general layout and proving, first storey, standard storey and roof plane figure, straight elevation and reciting elevation, the section systems of the stair and lift well, and several detail drawings. Every drawing is designed according to the requirement of standardizing and approved by teacher.Combine the architectural design closely at the time of the structural design in this project, strive to make economy and rational, assign the reinforced concrete shearwall in the structural system of the frame appropriatly, as resist side force component work together with frame coordinate, and make the structure have good antidetonation performance. Focal point that structure analyze lie in frame and shearwall work to analyze in coordination. Consider special requirement of graduation project, rely mainly on the fact that hands can be regarded as, electricity charge for complementing. The structural design is composed of seven parts: Structural rigidity is calculated; Function effect analysis of the horizontal earthquake; The verticality loads function and makes the frame and cuts the wall internal force of strength calculated; Load the effect association; The section is design and worthy of the muscle to calculate; The stair is designed; The roof beam board is designed .The main content of calculating book is as follows, finish one cast-in-place floor some unit design of board (include handwork to carry out load calculation, force analysis and match tendon to calculate, computer paints construction picture); Require to finish the layout of the structure of other floors according to building, employ SATWE procedure to calculate the electricity, and among layout of the structure construction drawing, employ flat law say, stamp roof beam, board, column, serial number of frame, board thick buying muscling; Calculate the frame of finishing artificially - Cut the wall structure of strength work and analyze in coordination, the structural side is moved and calculated, cut the strength wall designed by strength analysis and section, frame design strength analysis with section (including internal force analysis , level load with calculation , association , section that verticality load mixing the muscle and drawing the construction picture); Employ , design software finish , analyze , design , compare and analyse electricity regard as with main achievement that hand charge. 目 录 字摘要 2.4.2 梁的跨中最大弯矩 582.4.3 柱的内力组合 602.4.4 剪力墙内力组合 622.4.5 连梁内力组合 632.5 截面设计与配筋计算 64 2.5.1 框架梁(正、斜)截面设计 64 2.5.2 框架柱的截面设计 70 2.5.3 剪力墙墙肢截面设计 82 2.5.4 连梁正斜截面设计 872.6 楼梯设计 90 2.6.1 平台板计算 91 2.6.2 梯段板计算 93 2.6.3 平台梁计算 932.7 梁板设计 94 2.7.1 板的计算 94 2.7.2 梁的计算 99 结论104致谢105参考文献106附录107 摘 要本文设计了一种发动机取力器,这种取力器由于其特有的优点而应用广泛。随着改革开放的深入,中国社会经济和交通环境有了明显的改善,各行业对专用尤其是重型专用汽车的需求越来越大。重型自卸车、散装水泥车、混凝土搅拌车、高空作业车、消防车、洒水车、市政用车、油田专用车等重型专用汽车将更加受到用户的青睐。而这些专用汽车大多装有一个重要的零件,就是取力器,目前市场上的专用汽车的种类十分繁多,所以对应的取力器的种类也很多,安装方法和位置也是各有不同,性能也参差不齐。因此,设计一种容易操作、性能优越的取力器成为了一种必要。本文所研究的是一种发动机取力器,它的优点是结构紧凑,持续工作时间很长,它不受汽车离合器的干扰,只要发动机工作,不论离合器处于何种工作状态,取力器都能正常工作。因此发动机取力器的研发有着重要的意义。在本次设计过程中,作者绘制了总装图、部装图和重要零件图,并且做了相应的校核计算,提出了设计方案。关键词:取力器,齿轮,离合器,液压ABSTRACTThis paper designed a kind of power take-off of automobile,this kind of power take-off is extensively used because of its special advantage.With the policy of reform and opening-up,the Chinese social economy and the transportation environment had an obvious improvement.Special automobile is needed everywhere,and the quantity needed is larger and larger.Special automobile like heavy type self-discharging wagon,bulky cargo cement car,concrete mixer truck,overhead working truck,fire engine,sprinkler truck,city truck,the oil-field special truck etc. will be more welcomed by the customers.Amost all of these special automobiles have an important accessory, the power take-off. The category of the special automobiles in the market is very numerous currently, so the category of the power take-offs are also numerous. The ways of installment of these power take-offs are all different and the positions where they will be fixed are also different,so the performance of these power take-off are all different.Therefore,to design a kind of power take-off with high quality and easy to operate is necessary.What this paper study is a kind of engine power take-off.Its advantage is the tightly packed structure,long time to keep on working, and it is free fr
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 七年级沛县数学试卷
- 纪念李大钊的活动策划方案(3篇)
- 泉州水箱保温施工方案(3篇)
- 油罐系统施工方案(3篇)
- 消声雨棚施工方案(3篇)
- 尾矿砂回采施工方案(3篇)
- 中级考试题库大全及答案
- 手工帐教学的课件
- 北京市昌平区2024-2025学年八年级下学期期末考试道德与法制试题及答案
- 心理医生测试的题目及答案
- 新版外研版九年级英语上单词-默写纸-完整
- 设备预防性维修管理
- 经阴道后穹窿穿刺课件
- 去极端化自我剖析
- 船舶压载水取样与检测技术
- 人工流产后避孕服务规范
- 环境、社会与公司治理(ESG)
- 学校食堂食材配送服务方案(肉类、粮油米面、蔬菜水果类)(技术标)
- 物理学与人类文明(绪论)课件
- 《圆的周长》说课ppt
- 2023年临沧市市级单位遴选(选调)考试题库及答案
评论
0/150
提交评论