CA6140杠杆零件机械加工工艺及夹具设计【7张图纸】【优秀】

您若下载本次文件，将获得（CAD图纸+word文档），以下为本次文件的目录及部分图纸截图。【需要其他机械类资料可以联系QQ97666224】

摘  要

本设计是CA6140杠杆零件的加工工艺规程及一些工序的专用夹具设计。CA6140杠杆零件的主要加工表面是平面及孔。一般来说，保证平面的加工精度要比保证孔的加工精度容易。因此，本设计遵循先面后孔的原则。并将孔与平面的加工明确划分成粗加工和精加工阶段以保证孔的加工精度。基准的选择以杠杆外圆面作为粗基准，以孔及其下表面作为精基准。先将底面加工出来，然后作为定位基准，在以底面作为精基准加工孔。整个加工过程选用组合机床。在夹具方面选用专用夹具。考虑到零件的结构尺寸简单，夹紧方式多采用手动夹紧，夹紧简单，机构设计简单，且能满足设计要求。

关键词 杠杆零件，加工工艺，夹具，定位，夹紧

ABSTRACT

This paper is to design the craft processes of making the CA6140 lever spare parts and some specialized tongs in the process. The CA6140 lever spare part primarily processes the surface and bores. Generally speaking, to guarantee the accuracy of the flat surface process is easier than that of the bore. Therefore, this design follows the principle that surface first and then the bore, and definitely divides the process of flat surface and bore into coarse processes and precise processes to guarantee the bore processes. The basic choice is to consider 45 outside circle as rough basis and to consider 25 bore and its next surface as precise basis. The bottom is first processed out to be fixed position basis, and process the bore using the bottom as the precise basis. The whole processes choose the machine bed. In the aspects of tongs choosing, specialized tongs are used. In consideration of the simple construction size of the spare parts, clipping by hands is adopted. It is simple, and the organization design is simple, and can satisfy the design request.

Key Words  Lever spare parts, craft proces , tongs, fixed position, tight clip

摘 要Ⅰ

ABSTRSCTⅡ

1  绪论1

1.1课题背景及发展趋势1

1.2 夹具的基本结构及设计内容1

2  杠杆加工工艺规程设计3

2.1零件的分析3

2.1.1零件的作用3

2.1.2零件的工艺分析3

2.2杠杆加工的主要问题和工艺过程设计所应采取的相应措施4

2.2.1确定毛坯的制造形式4

2.2.2基面的选择4

2.2.3确定工艺路线4

2.2.4机械加工余量、工序尺寸及毛坯尺寸的确定5

2.2.5确定切削用量6

2.2.6确定基本工时17

2.3小结22

3  专用夹具设计23

3.1加工工艺孔Φ25夹具设计23

3.1.1定位基准的选择23

3.1.2切削力的计算与夹紧力分析23

3.1.3夹紧元件及动力装置确定24

3.1.4钻套、衬套、钻模板及夹具体设计25

3.1.5夹具精度分析27

3.1.6夹具设计及操作的简要说明27

3.2粗精铣宽度为30mm的下平台夹具设计28

3.2.1定位基准的选择28

3.2.2定位元件的设计28

3.2.3定位误差分析29

3.2.4铣削力与夹紧力计算29

3.2.5夹具体槽形与对刀装置设计30

3.2.6夹紧装置及夹具体设计32

3.2.7夹具设计及操作的简要说明33

3.3钻M8螺纹孔夹具设计33

3.3.1定位基准的选择33

3.3.2定位元件的设计34

3.3.3定位误差分析35

3.3.4钻削力与夹紧力的计算35

3.3.5钻套、衬套、钻模板及夹具体设计36

3.3.6夹紧装置的设计38

3.3.7夹具设计及操作的简要说明38

3.4小结39

4总结40

参考文献41

致 谢42