已阅读5页,还剩11页未读, 继续免费阅读
版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
System 800xA trainingChapter 27 Signal ObjectsTABLE OF CONTENTSChapter 27 Signal Objects127.1 General Information227.1.1 Objectives227.1.2 Legend227.2 Signal Objects327.2.1 Workflow327.2.2 Supported Hardware427.2.3 Signal Object Types427.3 Create Signal Objects527.3.1 Copy / Paste / Rename Signals527.3.2 Parameterize Signals627.3.3 How to Create Signal Objects727.4 IO Allocation927.4.1 IO Allocation Assistant1027.4.2 Read/Write Allocation1227.4.3 Board Reservation1327.4.4 Auto Update1327.4.5 How to Allocate IOs1415 / 1627.1 General Information 27.1.1 ObjectivesOn completion of this chapter you will be able to: Create signals in the Functional Structure Parameterize the signals Allocate signals to board channels Load allocation data27.1.2 LegendIndicates a key name.|Indicates when you go from one menu to a sub-menu.BoldIndicates a menu name or an option in a menu, or file structures“ “Indicates dialog box buttons, tabs, instructions etc.FIndicates start/explanation of student activity27.2 Signal ObjectsThe Signal Object functionality provides a way to get an Aspect Object for each signal. Without Signal Objects there is only a variable available in the Control Builder assigned to the channel of a board and no visual presentation in the Engineering Workplace. Signal Objects can be used in the Function Designer. They are displayed with a graphical symbol and can be connected graphically as well.When using Signal Objects the system will create the needed variables in the Control Builder automatically and will assign it to the channels as well. NOTE! The Signal Object name can start with a number, like 123FIC456_In. Each Signal Object contains a set of parameters. This allows entering signal data at an early stage without the necessity to create the specific I/O boards at that time. The allocation of signals to boards can be done in a later step.A Signal Object is visible in the Functional Structure and also in the Control Structure. This provides a kind of navigation and shows to which board/channel in the Control Structure a functional loop in the Functional Structure is connected.27.2.1 WorkflowWorking with the Signal Objects is based on a kind of workflow. Creation of Signal ObjectsCreate the Signals in the Functional Structure, either manually by instantiating the Signal Object Types or by using the Function Designer. Edit Signal PropertiesFill in the values for various properties like Min and Max value. Allocate Signals to IO BoardsUse the IO Allocation Assistant to allocate the signals to the IO boards or do it manually with the Insert Object functionality of the Engineering Workplace. Write allocation data to Control BuilderExecute the “Write Allocation into CBM” functionality to generate the signal variables, to assign the variables to the boards and to write the parameter to the Control Builder project.27.2.2 Supported HardwareA lot of boards do support the Signal Objects. But there are still a few boards that are not adapted to the Signal Object functionality so far. There is a simple way to check if a needed board could be used with Signal Objects or not. Each board that supports the Signal Objects contains an aspect called ChannelInfo at its Object Type.AI801 board supports Signal Objects27.2.3 Signal Object TypesThere are five Object Types available. They are located in the Object Type Structure in the folder Object Types | Control System | AC800m/C Connect | CBM_Signals.Object TypeTo be used forCBM_AISAnalog in boards, like AI810CBM_AOSAnalog out boards, like AO810CBM_DISDigital in boards, like DI810CBM_DOSDigital out boards, like DO810CBM_PulseSPulse boards, like DP82027.3 Create Signal ObjectsThere are different ways how to create Signal Objects: Manually Using the Function Designer Using the Bulk Data Manager This section will describe how to create the signals manually and by using the Function Designer.ManuallyThe simplest way is to create a Signal Object in the Functional Structure by using the “New Object” functionality of the workplace. Use the Signal Object Type and assign a name to the new object. NOTE! Always use the Name aspect for renaming. The Control Builder Name aspect is handled by the Signal Objects automatically.The description of the Name aspect will be written to the description of the board channel in the Control Builder.Function Designer Drag & drop the Signal Object Type from the Structure Browser onto the diagram. Assign a name to the new signal and connect it to a module.27.3.1 Copy / Paste / Rename SignalsIt is possible to copy & paste a signal with the workplace functionalities (Right click onto the Signal Object and “Copy”, browse to the destination and “Paste”).Rename the signal only with the Name aspect of the Signal Object because the Control Builder Name aspect is handled by the Signal Object automatically.27.3.2 Parameterize SignalsEach signal contains a CBM_SignalParameter aspect. This aspect includes the parameters of the signal. Open the “Main View” of the CBM_SignalParameter aspect and edit the signal settings.The Connection settings are assigned after writing the allocation into the Control Builder. This is done automatically by the IO Allocation.The Channel Settings can be edited by the user. Use the button to get a selection of possible values. But it is also possible to edit the value field manually.Get selection The Scaling area can be edited by the user as well. Click the “Apply” button to save the new values.27.3.3 How to Create Signal Objects1. Open a Function Diagram and enable the Structure Browser.2. Drag & drop the signal from the Structure Browser to the diagram. Enter the name for the signal and a description. This description will be transferred to the description of the channel in the Control Builder as well. Accept the dialog by clicking “OK”.3. Connect the signal with the module by using the port to the right. The port to the left is only used when connecting a field device.4. To parameterize the signal right click onto it and open the aspect CBM_SignalParameter. Set the parameters like Min/Max value and the Engineering Unit. 5. Click “Apply” to accept the changes.27.4 IO AllocationIO Allocation is the process of allocating signal objects to free channels of compatible I/O boards.Each signal of the Functional Structure has to be allocated to an IO board of the Control Structure. This is managed by the workplace functionality called Insert Object. An allocated signal can be seen in the Functional Structure and in the Control Structure as well. The location in the Functional Structure is flexible; whereas the location in the Control Structure is fixed (child object below the board object).You also need to assign the Channel Number to the signal because so far the signal is only allocated to the IO Board. This is managed by the ChannelNumber aspect located at the Signal Object.This signal is assigned to channel number 427.4.1 IO Allocation AssistantThe IO Allocation Assistant is a tool that provides a better and faster way of allocating Signal Objects to the IO Boards. The workflow is: Drag & drop the IO Boards into the IO Allocation Assistant first Then drag & drop the Signal Objects from the Functional Structure into the IO Allocation Assistant Finally drag & drop the signals to the channels to allocate.Open the IO Allocation Assistant by using the Advanced menu of the Engineering Workplace (Right click onto an object and select Advanced | IO Allocation).Signal viewBoard viewUse drag & drop to load boards from the Control Structure into the Board View. All objects, which are below the selected object, are added to the board view.Use drag & drop to load Signal Objects from the Functional Structure into the Signal View. All Signal Objects, which are below the selected object, are added to the Signal View.To allocate a single signal, select it in the signal view and drag & drop it onto a channel in the board view. To allocate multiple signals to multiple channels, select a bunch of signals in the signal view and drop them onto a board or the root object Boards in the board view. In this case the smart function finds automatically suitable channels for the signals.27.4.2 Read/Write AllocationThe signal data as well as the allocation information needs to be written into the Control Builder M in order to update the properties of the IO boards, set the connection strings, etc.Select an object in the Control Structure, click the right mouse button and select the menu item Advanced | Write Allocation into CBM. Depending on the selection either data of an individual signal, a complete IO board or a controller with all IO boards is written into the Control Builder. NOTE! If the control project object is selected all controllers with their IO boards are written into the CBM.The function Read Allocation from CBM will overwrite your signal object data with data currently stored in the Control Builder. NOTE! Use the Read Allocation from CBM function to create Signal Objects for already existing data in the Control Builder.27.4.3 Board ReservationAfter writing the allocation into the Control Builder once, the system will reserve this IO boards in the Control Builder. From now on the user should change the signal parameter data in the Engineering Workplace only (CBM_SignalParameter aspect). The IO board parameters in the Control Builder are set to read only.If necessary, this reservation could be deleted by the user. Browse into the Control Builder and right click onto a reserved board and select the entry Reservation.The button “Remove Reservation” will unlock the IO board and so the parameters of this board could be edited in the Control Builder. NOTE! Next time the procedure “Write Allocation into CBM” is executed, the board will be reserved again.27.4.4 Auto UpdateEach change concerning the allocation data (e.g. change of a parameter) requires to get the data into the Control Builder. The Auto Update functionality will automatically write the data into the Control Builder independent if the changes are made in the IO Allocation Assistant, Engineering Workplace, Bulk Data Manager or any other tool. Open the IO Allocation Assistant and select the menu Options | AutoUpdate CBM to enable the Auto Update function.27.4.5 How to Allocate IOsSo far the signal is not allocated to an IO board. This could be done by using the IO Allocation Assistant. But another pos
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 2026浙江绍兴市交通运输局下属事业单位招聘编外聘用人员1人笔试备考题库与答案解析
- 2026徐州市劳动保障代理服务中心有限公司招聘劳务派遣人员6人笔试备考题库与答案解析
- 2026年青岛通信网络保障中心公开招聘工作人员(4名)笔试备考题库与答案解析
- 2026年昆明市盘龙区文旅发展有限公司招聘(2人)考试参考试题及答案解析
- 2026辽宁大连理工大学文体场馆中心招聘体育场馆工作人员3人笔试备考题库与答案解析
- 兴化市陈堡镇2026年公益性岗位招聘笔试备考题库与答案解析
- 化妆刷产品介绍课件
- 会展企业课件
- 2026年餐饮管理综合测试(管理综合测试)试题及答案
- 德阳市第二人民医院2026年医疗卫生辅助岗招募(6人)笔试备考题库与答案解析
- 2026年山东省潍坊市建设工程专业技术资格考试建筑工程题库及答案
- 湖北荆州市监利市2025-2026学年八年级上学期期末英语试题(含答案)
- 全国农业水产行业职业技能大赛水生物病害防治员选拔赛试题及答案
- 湖南省2027届高三九校联盟第一次联考英语试卷(含答案及解析)+听力原文及音频
- 2026年辽宁省中考英语试题(含答案)
- 化工三废处理课件
- 养老院冬季安全知识培训内容课件
- 离散身份艺术表达-洞察及研究
- 青少年中医保健课件
- 《幼儿园班级管理 》课件-第四章 幼儿园班级安全管理
- T/CNFAGS 16-2024绿色甲醇分级标准(试行)
评论
0/150
提交评论