人人文库网 > 图纸下载 > 毕业设计 > 插座零件塑料注塑模具设计【全套注射塑料模具毕业设计含Word+18张CAD图纸】【一模四腔】【侧抽芯】【开题】

设计说明书.doc

插座零件塑料注塑模具设计【全套注射塑料模具毕业设计含Word+18张CAD图纸】【一模四腔】【侧抽芯】【开题】

资源目录

ZM122-插座零件塑料注塑模具设计【全套注射塑料模具毕业设计含Word+18张CAD图纸】【一模四腔】【侧抽芯】【开题】.zip

设计说明书.doc---(点击预览)

开题报告.doc---(点击预览)

工业插座零件参数计算.doc---(点击预览)

塑料模塑件尺寸公差.xls---(点击预览)

中期报告.doc---(点击预览)

外文翻译

外文翻译.doc---(点击预览)

Effect of cooling system on the polymer temperature and solidification during injection molding.pdf---(点击预览)

动模型腔.dwg

动模板.dwg

定位环.dwg

定模型芯.dwg

定模板.dwg

导套.dwg

导柱.dwg

小构件.dwg

拉料杆.dwg

推杆A4.dwg

推板.dwg

推板固定板.dwg

推板工序卡片.dwg

斜导柱1A4.dwg

胶口衬套.dwg

装备图.dwg

零件.dwg

顶杆.dwg

压缩包内文档预览：(预览前20页/共51页)

编号：481039 类型：共享资源大小：3.67MB 格式：ZIP 上传时间：2015-10-21 上传人：小*** IP属地：福建

50
积分

版权申诉 word格式文档无特别注明外均可编辑修改；预览文档经过压缩，下载后原文更清晰！ 立即下载

关键词：: 插座零件塑料注塑模具设计全套注射塑料模具毕业设计 word 18 cad 图纸一模四腔侧抽芯开题

资源描述：

!【包含文件如下】【注塑塑料模具类】CAD图纸+word设计说明书.doc[24000字，51页]【需要咨询购买全套设计请加QQ97666224】.bat

拉料杆.dwg

推杆A4.dwg

推板.dwg

定位环.dwg

定模型芯.dwg

动模型腔.dwg

动模板.dwg

定模板.dwg

导套.dwg

导柱.dwg

小构件.dwg

推板固定板.dwg

零件.dwg

顶杆.dwg

推板工序卡片.dwg

斜导柱1A4.dwg

胶口衬套.dwg

装备图.dwg

设计说明书.doc[24000字，51页]

中期报告.doc

塑料模塑件尺寸公差.xls

外文翻译

工业插座零件参数计算.doc

开题报告.doc

工业插座零件塑料注塑磨具设计

摘要

本文介绍了插座零件塑料注塑模具的设计，主要包括：塑件材料的分析；注塑机的选择；模具结构的设计；成型零件的设计；抽芯机构的设计等。

本文是关于注塑模具的设计，该模具结构简单，成型分型都非常简单。依据产品的数量和塑料的工艺性能确定了以双分型面注塑模的方式进行设计，采用一模一腔，采用了点浇口进行浇注，推出形式为推杆推出机构完成塑件的推出。在正确分析塑件工艺特点和ABS材料的性能的后。详细介绍了对凸模，凹模，浇注系统，脱模机构，侧抽芯系统，选择标准零件的设计与非标件的设计过程。

通过本设计，可以对注塑模具和绘图软件有一个初步的认识，注意到设计中的某些细节问题，了解模具结构及工作原理；通过对CAD和PRO/e的学习，可以建立较简单零件的零件库，从而有效的提高工作效率。

关键词：插座零件；注塑模具；侧抽芯机构；侧浇口

Industrial socket parts plastic injection molding tool design

Abstract

This paper introduces the design, sockets for plastic injection mold include: analysis of the plastic injection molding machine; selection; mould design; design of molding parts; core-pulling mechanism design.

This paper is about the design of injection mold, the mold is simple in structure, forming type are very simple. Based on the technological properties of the number of products and plastic injection mold design to the parting surface of the methods were determined, using a mold cavity, using a runner for pouring out form of introduction mechanism for putting the completion of the introduction of plastic parts,. Plastic properties of materials and process characteristics of ABS in the correct analysis of the. A detailed introduction to the punch, die, casting system, stripping mechanism, the side core pulling system, selection of standard parts, non-standard pieces of the design process design.

Through this design, can have a preliminary understanding of the injection mold and drawing software, pay attention to the details of the design, understanding the structure and working principle of mold; through the CAD and PRO/e learning, you can create a simple parts library, to improve work efficiency.

Keywords: socket parts;injection mold; side core-pulling mechanism; the side gate

1 绪论1

1.1前言1

1.2 模具发展现状及发展方向1

2 塑料材料分析5

2.1 塑件材料的选择5

2.2 塑件收缩率与模具尺寸的关系7

3 塑件的工艺分析9

3.1 塑件的结构设计9

3.2 塑件尺寸及精度10

3.3 塑件表面粗糙度11

3.4 塑件的体积和质量11

4 注射成型工艺方案及模具结构的分析和确定12

4.1 注射成型工艺过程分析12

4.2 浇口种类的确定13

4.3 型腔数目的确定13

4.4 注射机的选择和校核13

4.4.1 注射量的校核14

4.4.2 型腔数量的确定和校核15

4.4.3 塑件在分型面上的投影面积与锁模力的校核15

4.4.4 模具与注射机安装模具部分相关尺寸校核16

5 注射模具结构设计18

5.1 分型面的设计18

5.2 型腔的布局18

5.3 浇注系统的设计19

5.3.1 浇注系统组成19

5.3.2 确定浇注系统的原则19

5.3.3 主流道的设计20

5.3.4 分流道的设计21

5.3.5 浇口的设计21

5.3.6 冷料穴的设计21

5.4 注射模成型零部件的设计22

5.4.1 成型零部件结构设计22

5.4.2 成型零部件工作尺寸的计算23

5.5 排气结构设计24

5.6 脱模机构的设计24

5.6.1 脱模机构的选用原则24

5.6.2 脱模机构类型的选择25

5.6.3 推杆机构具体设计25

5.7 注射模温度调节系统26

5.7.1 温度调节对塑件质量的影响26

5.7.2 冷却系统之设计规则26

5.8 模架及标准件的选用27

5.8.1 模架的选用27

5.9 侧向抽芯机构类型选择28

5.10 斜导柱侧向抽芯机构设计计算以及抽芯结构28

5.11 导套的设计31

5.12 模具开合运作过程32

6 主要尺寸计算33

6.1 斜导柱尺寸计算33

6.1.1 斜导柱直径的计算33

6.1.2 斜导柱长度计算34

6.2 型芯垫板厚度计算35

7 模具材料的选用37

7.1 塑料模具用钢的必要条件37

7.2 选择钢材的条件37

7.3 模具选材37

7.4 模具的表面粗糙度38

7.5 注塑模具强度分析计算38

8 模具可行性分析和环境分析40

8.1本模具的特点40

8.2市场效益及经济效益分析40

8.3模具的环保分析40

附录40

总结41

参考文献44

致谢45

QQ截图20151020133128.jpg

QQ截图20151020143217.jpg

导套.jpg

顶杆.jpg

定模板.jpg

定模型芯.jpg

定位环.jpg

动模板.jpg

动模型腔.jpg

胶口衬套.jpg

塑件图.jpg

推板.jpg

推板工序卡片.jpg

推板固定板.jpg

推杆A4.jpg

小构件.jpg

斜导柱1A4.jpg

内容简介：: temperaturePujos,Cedex,greatmoldingnumercoolingis toeffectandqualityfastestlar industrieincreasewell knowneconomicallymer melt sufficiently so that the part can be ejected without anysignificant deformation 2. An efficient cooling system design ofthe cooling channels aiming at reducing cycle time must minimizesuch undesired defects as sink marks, differential shrinkage, ther-mal residual stress built-up and part warpage. During the post-fill-ing and cooling stages of injection molding, hot molten polymertouches the cold mold wall, and a solid layer forms on the wall.tion to the coolant moving through the cooling channels and bynatural convection to the air around the exterior mold surface.The coolant is flowing through the channels at a given flow rateand a given temperature which is considered constant throughoutthe length of the channel. In this work, time-dependenttwo-dimensional model is considered which consists of an entirecomputational domain of the cavity, mold and cooling channelsurfaces. The cyclic transient temperature distribution of the moldand polymer T-shape can be obtained by solving the transientenergy equation.* Corresponding author. Tel.: +330540006348; fax: +330540002731.Applied Thermal Engineering 29 (2009) 17861791Contents lists availableE-mail address: hassanenscpb.fr (H. Hassan).cess where polymer is injected into a mould cavity, and solidifiesto form a plastic part. There are three significant stages in each cy-cle. The first stage is filling the cavity with melt hot polymer at aninjection temperature (filling and post-filling stage). It is followedby taking away the heat of the polymer to the cooling channels(cooling stage), finally the solidified part is ejected (ejection stage).The cooling stage is of the greatest importance because it signifi-cantly affects the productivity and the quality of the final product.It is well known that more than seventy percent of the cycle timein the injection molding process is spent in cooling the hot poly-distribution of the mold and polymer, therefore, their effect onthe solidification degree of that polymer. A fully transient moldcooling analysis is performed using the finite volume method fora T-shape plastic mold with similar dimensions to 5, as shownin Fig. 1. Different cooling channels positions and forms arestudied.2. Mathematical modelThe heat of the molten polymer is taken away by forced convec-1. IntroductionPlastic industry is one of the worldsranked as one of the few billion-dolinjection molded parts continues toplastic injection molding process iscient manufacturing techniques forprecision plastic parts with various shapesat low cost 1.The plastic injection molding1359-4311/$ - see front matter C211 2008 Elsevier Ltd. Alldoi:10.1016/j.applthermaleng.2008.08.011growing industries,s. Demand forevery year becauseas the most effi-producing ofand complex geometryprocess is a cyclic pro-As the material cools down, the solid skin begins to grow withincreasing time as the cooling continues until the entire materialsolidifies. Over the years, many studies on the problem of the opti-mization of the cooling system layout in injection molding andphase change of molding process have been made by variousresearchers and ones which focused intensity on these topicsand will used in our system design and validations are 36.The main purpose of this paper is to study the effect of the coolingchannels position and its cross section shape on the temperatureCooling systemleads to minimum cooling time is not achieving uniform cooling throughout the mould.C211 2008 Elsevier Ltd. All rights reserved.Effect of cooling system on the polymerduring injection moldingHamdy Hassan*, Nicolas Regnier, Cedric Lebot, CyrilLaboratoire TREFLE-Bordeaux1-UMR 8508, Site ENSCPB, 16 Av. Pey Berland, 33607 Pessacarticle infoArticle history:Received 15 November 2007Accepted 19 August 2008Available online 30 August 2008Keywords:PolymerSolidificationInjection moldingabstractCooling system design is ofis crucial not only to reduceity of the final product. Aperformed. A cyclic transientof the mold cooling studycooling system design. Theture distribution of the moldtivity of the process, the coolingshould be necessary for theApplied Thermaljournal homepage: www.elsevirights reserved.Guy DefayeFranceimportance for plastic products industry by injection molding because itcycle time but also it significantly affects the productivity and qual-ical modeling for a T-mold plastic part having four cooling channels isanalysis using a finite volume approach is carried out. The objectivedetermine the temperature profile along the cavity wall to improve theof cooling channels form and the effect their location on the tempera-the solidification degree of polymer are studied. To improve the produc-time should be minimized and at the same time a homogeneous coolingof the product. The results indicate that the cooling system whichand solidificationat ScienceDirectE/locate/apthermengntsdissipation of the heat through phase change process. This tech-plicit/implicit technique already validated in previous studies byVincent 8, and Le Bot 9 that is based on the technique NewSource” of Voller 10. This method proposes to maintain the nodeswhere phase change occurs to the melting temperature. This solu-tion is repeated until the convergence of the temperature with thesource term equals to the latent heat. The source term is discret-ized by:ScqLfofsotqLffn1sC0fnsDt5The solid fraction which is function of the temperature is line-arized as:NomenclatureCP(J/kg K) specific heat at constant pressurefssolid fractionh (W/m2K) heat transfer coefficientK number of the internal iterationsL latent heat of fusion, J/kgn number of the external iterationsN normal directionScsource termT (K) temperaturet (s) timeH. Hassan et al./Applied Thermal Engineeringnique is applied on fixed nodes and the energy equation in thiscase is represented as follow:qCPoTotr:krTSc2And the source term Scis represented by:ScqLfofsot3where fs(T) = 0.0 at TC31Tf,(full liquid region) 0C30 fsC301, at T = Tf(iso-thermal phase change region) and, fs(T)=1 at TC30Tf(full solidregion).On the whole domain, the following boundary conditions areappliedC0koToN hcT C0Tc2C1; and C0koToN haT C0Ta2C2: 43. Numerical solutionThe numerical solution of the mathematical model governingthe behavior of the physical system is computed by finite volumemethod. The equations are solved by an implicit treatment forqCPoTotr:krT1In order to take into account the solidification, a source term isadded to the energy equation corresponding to heat absorption orheat release 7, which takes in consideration the absorption or thethe different terms of the equations system. When we take in con-sideration the solidification effect, the energy equation is solvedwith a fixed point algorithm for the solid fraction. For each, itera-tion of that fixed point, we use discretization with time hybrid ex-0.20.4 0 .2 0.004 0.03 0.004 P2 P3 P4 P1 P6P7 P5 Exterior air, free convection, haCooling channels, forced convection, hfFig. 1. MoldstructurewithaT-shapeproductandfourcoolingchannels(Dim.Inm).Greek symbolsk (W/m K) thermal conductivityq (kg/m3) densityC1interior surface of the cooling channelsC2exterior surface of the moldSubscriptsa ambient airc cooling fluidf phase change0.01 0.01 0.01 0.01 0.010.02A1 A2 A3 A4A5 A7B1 B2 B3 B4B5B7C1 C2C3C4 C5D1D2 D3 D4D50.04 0.02 0.01 0.015 Polymer Fig. 2. Different cooling channels positions (Dim. In m).29 (2009) 17861791 1787fnk1Ks fnkKsdFsdTC18C19nkKTnk1KC0TnkK6Then, we force the temperature to tend to the melting temper-ature where the source term is not null by updating the sourceterm:Sk1c SkcqCpT C0TfDt7The energy equation is discretized as follow:qCPDtC0qLfDtdFdTC18C19nkK!Tnk1KC0r:krTnk1KqLfDtfnk1KsC0fnsC0qLfDtdFdTC18C19nkKTfqCPDtTn8With:dFdT!C01 if 0 C30 fnkKsC30 1 anddFdT 0iffnkKs 0or1 9ntsThis process allows differentiating the temperature field and so-lid fraction calculated at the same instant and the linear system issolved by central discretization method 11. For each internal iter-ation, the resolution of that equation provides fnk1Ksand Tnk1K. Theconvergence is achieved when the criteria of the solid fraction andtemperature are verified by:fnk1KsC0fnkKsC13C13C13C13C13C13C302fand; Tnk1KC0TnkKC13C13C13C13C13C13C302T10Further details on the numerical model and its validation arepresented in 9.the horizontal direction (between positions B2 and B5 or positionsA2 and A5 which have the maximum solidification percent). Whenwe compare the solidification percent for different locations of theupper positions C and D, we find that as the channel approaches tothe product in the horizontal direction the solidification percentincreases, and the cooling rate increase rapidly compared withthe effect of lower position. We notice that, the effect of the coolingchannel position on the temperature distribution and solidificationdecreases as the cooling time augments to higher value and its ef-1788 H. Hassan et al./Applied Thermal Engineering4. Results and discussionA full two-dimensional time-dependent mold cooling analysisin injection molding is carried out for a plate mould model withT-shape plastic mold and four cooling channels as indicated inFig. 1. Due to the symmetry, half of the mold is modeled and ana-lyzed. All the cooling channels have the same size and they havediameter of 10-mm each in case of circular channels. The coolingoperating parameters and the material properties are listed in Ta-bles 1 and 2, respectively, and they are considered constant duringall numerical results 5,7. Each numerical cycle consists of twostages, cooling stage where the cavity is filled with hot polymerinitially at polymer injected temperature, the ejection stage wherethe cavity is filled with air initially at ambient temperature. Figs. 3and 4 show the cyclic transient variations of the mould tempera-ture with time for 16 s mold cooling time at locations;(P1,P2,P3,P4) beside the mould walls and P5 to P7 inside the mouldwalls, respectively (Fig. 1) and that in case of applied the solidifica-tion and without applied solidification. They are simulated for thefirst 30 cycles in case of circular cooling channels position (A5, D3)as shown in Fig. 2. We find that, the simulated results are in goodagreement with the transient characteristic of the cyclic mold tem-perature variations described in 5. It is found that there is aslightly difference in temperatures values between the two results,thus due to the difference in numerical method used and the accu-racy in the numerical calculations. The figures show that, the rela-tively temperature fluctuation is largest near the cavity surface anddiminishes away from the cavity surface. We find that the maxi-mum amplitude of temperature fluctuation during the steady cyclecan reach 10 C176C without applying solidification and 15 C176C in case ofapplying the solidification.4.1. Effect of cooling channels formAn efficient cooling system design providing uniform tempera-ture distribution throughout the entire part during the cooling pro-cess should ensure product quality by preventing differentialshrinkage, internal stresses, and mould release problems. It alsoshould reduce time of cooling and accelerate the solidification pro-cess of the product to augment the productivity of the moldingTable 1Cooling operating parametersCooling operatingparameterCooling operating parameterCoolant fluidtemperature30 C176C Ambient air temperature 30 C176CPolymer injectedtemperature220 C176C Heat transfer coefficient ofambient air77 W/m2KTemperature of fusionof polymer110 C176C Heat transfer coefficient insidecooling channel3650 W/m2KLatent heat 115 kJ/ Mold opening time 4 skgprocess. To demonstrate the influence of the cooling channels formon the temperature distribution throughout the mould and solidi-fication process of the product, we proposed three different crosssectional forms of the cooling channels, circular, square, rectangu-lar1 with long to width ratio of 0.5 and rectangular 2 with width tolong ratio of 0.25. Two cases are studied; first case, all the coolingchannels have the same cross sectional area, and the second case,they have the same perimeter. The comparison is carried out forthe same cooling channels position (A5, D3).Fig. 5 shows the solidification percent (calculated numericallyas the summation of the solid fraction of each element multipliedby the area of that element to total area of the product) for differ-ent forms with different cooling time. The figure indicates that theeffect of cooling channels form on the cooling rate decreases withincreasing the cooling time. It also shows that the cooling channelform rectangle 2 has the maximum solidification percent for case1, and in case 2 the changing of the cooling channels form hasnot a sensible effect on the solidification percent. The same resultscan be obtained when we compared the solidification in the prod-uct and the temperature distribution though the mould for differ-ent forms with the same cross sectional area at the end of thecooling stage for cooling time 24 s for cooling cycle 25, as shownin Figs. 6 and 7, respectively. The results indicate that the coolingprocess is improved as the cooling channels tend to take the formof the product.4.2. Effect of cooling channels positionTo investigate the effect of the cooling channels position, we di-vided the proposed positions into four groups, groups A and B fordifferent positions of the bottom cooling channel, with a fixed po-sition of the top cooling channel, and with vice versa for groups Cand D for the same cooling channel form (circular) as illustrated inFig. 2.Fig. 8 represents the effect of different cooling channel positionson the of solidification percent at the end of 25th cooling cycle forgroups A and B (lower cooling channel effect), C and D (upper cool-ing channel effect) with cooling time. It indicates that for lowercooling channel position effect, the cooling rate increases andhence the solidification percent of the polymer increases as thecooling channel approaches the polymer in the vertical direction(position B has solidification percent greater than position A, andwith the same positions C and D). The figure shows also the mostefficient cooling rate is obtained as the cooling channel takes theposition between 20% and 50% through the product length forTable 2Material propertiesMaterial Density (kg/m3) Specific heat (J/kg K) Conductivity (W/m K)Mould 7670 426 36.5Polymer 938 1800 0.25Air 1.17 1006 0.026329 (2009) 17861791fect on the cooling rate of the product is not the same for differentpositions.ntsEngineering6065abH. Hassan et al./Applied ThermalThe solidification degree distribution through the product at theend of cooling stage at the end of cooling time 24 s and 25th cool-ing cycle for different locations of cooling channel is shown inFig. 9, and the temperature distribution throughout the mouldand the polymer at the same instant for different cooling channelsTemperature, oC Time, s 0 200 400 600303540455055P1P2P3P4Fig. 3. Temperature history of the first 30 cycles at locationsTime,s3035404550556065P5P6P7abTemperature, oC 0 200 400 600Fig. 4. Temperature history of the first 30 cycles at locationsSolidification percent Coolingperiod (constant perimeter )Coolinvgperiod (constant area )+1616182022242628300.680.720.760.80.840.880.920.96CircleRectangle1Rectangle2SquareCircleRectangle1Rectangle2Square+30282624222018Fig. 5. Changing the solidification percent of the polymer part with cooling time fordifferent cooling channel forms.707529 (2009) 17861791 1789position is shown in Fig. 10. When we examine the solidificationdegree of the product and the temperature distribution throughoutthe mold for different positions, we find that as the cooling channelposition moves toward the products, the homogeneity of the tem-perature distribution throughout the polymer and the mold duringTemperature, oC Time, s 03035404550556065P1P2P3P4600500400300200100P1 to P4 (a) without solidification (b) with solidification.Time,s30354045505560657075P5P6P7Temperature, oC 0 200 400 600P5 to P7 (a) without solidification (b) with solidification.Fig. 6. Solidification percent distribution through the product for different coolingchannels forms (a) rectangular 2 and (b) circular having the same cross sectionalarea.nts38404040424245454545455050505555606056570708080990XY0 0.05 0.1 0.15 0.200.03535373738383840404040424242424254545454550505555606065657070809XY0 0.05 0.1 0.15 0.200.0abFig. 7. Temperature distribution through the mould for different cooling channels forms (a) circular and (b) rectangular 2 having the same cross sectional area.Time, s Solidification percent +200.820.840.860.880.90.920.940.960.981B1,D3B2,D3B3,D3B5,D3B7,D3A1,D3A2,D3A3,D3A5,D3A7,D3+Solidification percent 0.820.840.860.880.90.920.940.960.981B2,C1B2,C2B2,C3B2,C5B2,D1B2,D2B2,D3B2,D53028262422Time, s 20 3028262422abFig. 8. Changing the solidification percent of the polymer part with cooling time for different cooling channel positions (a) lower cooling channel positions A and B and(b) upper cooling channel positions C and D.Fig. 9. Solidification percent distribution through the product for different cooling channels positions for cooling time 24 s and 25th cooling period (a) B7, D3 (b) B2, D3,(c) B2, C5, and (d) B2, C3.1790 H. Hassan et al./Applied Thermal Engineering 29 (2009) 17861791nts37383838404040424224245454545455050505060607708809090100100110110Y0.0353737383838404040424245454550505055555606065655707075780809Y0.0abpositionsH. Hassan et al./Applied Thermal Engineering 29 (2009) 17861791 1791the solidification process decrease for example positions (B2, D3)and (B2, C

温馨提示:
1: 本站所有资源如无特殊说明，都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等，如果需要附件，请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸，网页内容里面会有图纸预览，若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间，仅对用户上传内容的表现方式做保护处理，对用户上传分享的文档内容本身不做任何修改或编辑，并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容，请与我们联系，我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

人人文库网所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。