cisco综合配置实验.doc

一、1楼交换机的配置int range fa0/1 , fa0/24 swi mod trunk swi trunk allowed vlan allvtp mode servervtp domain ciscovtp password ciscovtp pruningvlan 11vlan 12int fa0/2 swi mode acc swi acc vlan 11int vlan 1 ip add 1.1.1.1 255.255.255.0enable ciscoline vty 0 4 pass cisco login注：查看vtp状态的命令是:show vtp status 查看vlan的信息是:show vlan 二、2楼交换机的配置int fa0/24 swi mode trunk swi trunk int fa0/2 swi mode acc swi acc vlan 12vtp mode clientvtp domain ciscovtp password ciscoint vlan 1 ip add 1.1.1.2 255.255.255.0 no shenable secret ciscoline vty 0 4 password cisco login三、路由器的配置 int fa0/0 ip add 192.168.150.150 /24 no sh int fa0/1 no ip add no sh-以上是配置外网接口IP int fa0/1.1 encapsulation dot1q 11 ip add 172.16.11.1 /24 int fa0/1.2 encapsulation dot1q 12 ip add 172.16.12.1/24 int fa0/1.3 encapsulation dot1q 1 ip add 1.1.1.254 /24以上是配置VLAN间的路由-service dhcpip dhcp pool floor1 network 172.16.11.0/24 dns-server 202.102.192.68 default-router 172.16.11.1ip dhcp pool floor2 network 172.16.12.0/24 dns-server 202.102.192.68 default-router 172.16.12.1ip dhcp excluded-address 172.16.11.1ip dhcp excluded-address 172.16.12.1-以上是配置DHCPip route 0.0.0.0 0.0.0.0 192.168.150.1以上是配置路由-int fa0/0 ip nat outsideint fa0/1.1 ip nat insideint fa0/1.2 ip nat insideaccess-list 1 permit 172.16.0.0 0.0.255.255ip