资源目录
压缩包内文档预览：
编号：531214
类型：共享资源
大小：18.45KB
格式：ZIP
上传时间：2015-11-25
上传人：QQ28****1120
认证信息
个人认证
孙**（实名认证）
辽宁
IP属地：辽宁
6
积分
- 关 键 词：
-
机械毕业设计英文翻译
- 资源描述：
-
机械毕业设计6英文翻译外文文献翻译103,机械毕业设计英文翻译
- 内容简介：
-
- 1 - 附录 VIRTUAL INSTRUMENT AND FREQUENCY CONVERSION TECHNOLOGY-BASED BRAKE TEST SYSTEM Brake is widely useful and very important safety assuring equipment. The aim of Brake test system， which is based on visual instrument and frequency changing technology， is to integrative measure and analyze the performance and quality of the brake.This paper mainly introduces the principle， composing， function and features of the brake test system. And from the point of view of the principle of Visual Instrument （ VI） technology， a test system， based on the VI and frequency changing technologies and consist of frequency changing drive and control sub-system and measuring sub-one， is constructed. With the test system the performances and braking course could be auto controlled and measured to the brakes which includes disc and drum ones. And the measuring and control software is programmed with the LabVIEW published by American NI Corporation， USA.Then data real time acquisition， processing， displaying and recording will be realized. The test system also has the functions of voltage adjusting， rotating speed control， load regulating， JC value setting， temperature nts - 2 - measuring， and braking route and time memorizing and analyzing. It will be very important for meaning and exciting boosting effect to advance quality and capabilities of the brakes and the security of equipments and system which have adopt the brakes. 1 Operating principles According to the principle of work and power， the change of kinetic energy in the moving of objects equals to the full power of the force act on the object in that process.The energy obtained by brake to be tested： Therefore， it is feasible to use combined inertial flywheels to simulate rotating inertia of crane hoist and its transmission components to test the performance and quality of the brake. According to the moment of momentum theorem： Tbt =Ji （ 1） When Tb is fixed， tb can be controlled through combinations between Ji and differently. Brake drum or plate， which will be measured， and combined inertial flywheels for loading on are driven to rotate by AC frequency conversion motor （ or DC one， which will not be dealt with in this article carefully） . According to the principles nts - 3 - shown in the formula （ 1） ， we can simulate actual processes of brakes fitted on lifting and transport machineries， engineering ones， mining ones and construction ones by changing the technical specification duty JC， the flywheels inertial moment Ji and motors rotational speed ni.When detected brakes work in simulation cycle and brake repeated， infrared thermoscopes and torque sensors， and other sensors will record braking shown in the heat， braking torque， braking time and brake speed parameters. 2The composition and structure of the brake test system This test system is intended to achieve the performances of drum and disc brakes and has following functions： （ 1） Brake replacement According to different type of brakes the corresponding base will be chosen and brake position could be adjusted using electric slide test-bed； （ 2） Multi-level loading We can simulate the actual loading on brakes in a crane with different combined flywheels. The test system adopts manual hydraulic system composed by a three-position four-way nts - 4 - hand-operated direction valve， a relief one and their accessories， and it is operation saving and convenient to replace flywheels. （ 3） Regulation the rotational speed n （ or ） It can be realized by changing frequency supplied to the AC motor. When braking torque is very large， such as 10000Nm， it should be appropriate for regulating initial brake speed upward 1000r/min to minimize rotating inertia possibly. （ 4） Braking frequency adjustment Based on actual needs braking frequency can be confined in a range of 14 times per minute. （ 5） Braking torque measurement There are three methods： a） Direct measurement via torque sensors： Rotational speed and torque sensor will be installed between the detected brake drum or plate and inertial flywheel plates.Dynamic braking torque of detected brake will be directly measured， shown in Fig.1 and Fig.2. According to the scope of braking torque of detected brakes， two or three rotational speed and torque sensors should be prepared for testing torque to meet the accuracy requirements； b） Indirect parameter measurement： nts - 5 - Based on the rotating inertia and braking time we can get brake torque using mathematical relationship between these parameters， as shown in Fig. 2. c） Indirect measurement by pedestal-force： The pressure sensors are installed under the base where detected brake are fixed to feel the forces given by brake， and then to obtain brake torque. The second approach has small investment， simple structure and no torque sensors which mean not considering related troubles of changing torque sensors. But the procedure to calculate torque is complex， and accumulating total errors would be larger and then the result accuracy will be low. The third way has the advantage of the replacement of sensors is easier and no special requirements for sensors installing precision. It is still an indirect measurement but the procedure is less than that in the second method and that means the cumulative errors relatively is smaller. And visible shortcoming is poor dynamic response. （ 6） Automatic control Except to manual operation test system is also programmed nts - 6 - control. （ 7） Monitoring Braking frequency， initial braking speed， the aggregate braking number， moment， time and so on will be shown automatically. （ 8） Automatically data acquisition and processing The curve describing braking torque， time and speed could be drawn automatically by means of computer software while detected brake is measured in dutycycle operation. Therefore， in response to the way to test braking torque the system can be divided into three ones of that with torque sensor such as Fig.1 and 2 above， that without torque sensor such as shown in Fig.3 and that of pedestal-power measurement without torque sensor， as shown in Fig.4. The test system is mainly composed of AC frequency conversion transmission system， flywheels loading system， rotational speed and torque sensors， base which to fix drum or plate brakes， adjustable DC power supply， detected brakes and test and control system. nts - 7 - 基于制动试验台的虚拟仪器与变频技术 制动器是广泛有益的和非常重要的安全保障设备。制动测试系统的目的是综合衡量和分析制动试验系统的性能和质量的刹车，组成，功能。从目视仪器理论的角度来看，基于 VI和频率不断变化的技术和包括频率变化的驱动和控制子系统和测量分之一构成的。随着测试系统的性能和制动过程可自动测量，以控制和刹车，其中包括光盘和鼓的。和测量和控制软件的设计与 LabVIEW的出版的美国公司 -美国。然后数据实时采集，处理，显示和记录一定会实现。测试系统还具有功能的电压调整，转速控制，负荷调节，巴埃纳价值设定，温度测量，和制动路线和时间背诵和分析。这将是非常重要的意义和令人激动的推动作用，以推进素质和能力的刹车和安全的设备和系统已经采取刹车。 1.工作原理 根据工作原理和功率的变化动能在移动的物体等于全部力nts - 8 - 量采取行动，该部队的目标过程中取得的制动能量进行测试：因此，它是可行的使用相结合，模拟惯性飞轮转动惯量的起重机吊重机及其传动部件的性能测试和质量制动。根据动量矩定理： Tbt =Ji （ 1） 当 TB 是固定的， TB 是可以控制的，通过组合之间籍和 不同，制动鼓或板，这将是衡量，并结合惯性飞轮装载的驱动旋转的交流变频电机。根据原则表现在公式（ 1），我们可以模拟实际过程中刹车安装在起吊和运输机械，工程的，采矿业和建筑业的是通过改变技术规范责任巴埃纳，飞轮的惯性时刻姬和电机转速镍。当工作中发现刹车和制动仿真周期重复，其他传感器将记录中显示的制动热，制动力矩，制动时间和制动的速度参数。 2.刹车测试系统的组成和结构 该测试系统是为了实现表演鼓和盘式制动器 ，并以下职能： （ 1）更换制动 根据不同类型的刹车相应的基地将选择和刹车的位置可以调整使用电动滑试验台； （ 2）多层次载入中 nts - 9 - 我们可以模拟实际负荷制动器在起重机不同组合飞轮。该测试系统采用手动液压系统组成，由一个三人立场四路手操作的方向阀，救济及其配件之一，它是操作方便，节约和替代飞轮。 （ 3）规例转速 n 它可以实现通
- 温馨提示:
1: 本站所有资源如无特殊说明，都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等，如果需要附件，请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸，网页内容里面会有图纸预览，若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间，仅对用户上传内容的表现方式做保护处理，对用户上传分享的文档内容本身不做任何修改或编辑，并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容，请与我们联系，我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
人人文库网所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。
川公网安备: 51019002004831号