MTK短信相关函数.doc

1、全局变量和资源短信箱容量custompsIWIT23_07A_PMJ_BBcustomer_ps_inc.h #define CM_SMS_MAX_MSG_NUM 400 / 手机 + SIM卡customcommonPLUTO_MMInvram_common_defs.h#define NVRAM_EF_SMSAL_SMS_TOTAL 200 / 手机信箱和索引表customcommonmmi_msg_context.c unsigned short mmi_frm_sms_inbox_listCM_SMS_MAX_MSG_NUM;/ 收件箱索引表 unsigned short mmi_frm_sms_outbox_listCM_SMS_MAX_MSG_NUM; / 发件箱索引表mmi_frm_sms_msgbox_struct mmi_frm_sms_msg_boxCM_SMS_MAX_MSG_NUM;/ 信箱plutommimmimiscframeworkmiscframeworkincSMSApi.hmmi_frm_sms_app_msgbox_enum / 信箱类型枚举 MMI_FRM_SMS_APP_INBOX = 0x02, MMI_FRM_SMS_APP_OUTBOX = 0x04plutommimmimiscframeworkmiscframeworkincSMSStruct.hmmi_frm_sms_msgbox_enum / 信箱类型枚举 MMI_FRM_SMS_INBOX = 0x02, MMI_FRM_SMS_OUTBOX = 0x04,索引表mmi_frm_sms_inbox_list和索引表mmi_frm_sms_outbox_list，分别对应【消息】菜单中的【收件箱】和【发件箱】。信箱mmi_frm_sms_msg_box 保存的只是短信副本，用于显示和其它处理，直接更改其数据对实际的短信无效，必须向L4层发送消息才能生效。通过索引列表(mmi_frm_sms_xxbox_list)在短信箱菜单和短信之间建立关联： 菜单 消息 收件箱 短信1 - mmi_frm_sms_inbox_listitemIndex - smsIndex 短信2 . 短信n 短信箱(字串/屏幕)资源plutommimmiMessagesMessagesIncMessagesResourceData.hSTR_INBOX_MENUENTRY / “收件箱”STR_OUTBOX_MENUENTRY, / “发件箱”SCR_ID_MSG_INBOX_LIST / 收件箱屏SCR_ID_MSG_OUTBOX_LIST,/ 发件箱屏幕STR_SCR6028_CAPTION / “消息选单”2、发短信2.1、发送过程 SmsMoMtGuiInterface.cSmsMoMtGuiInterfaceSmsPsHandlerSMSCoreSMSMsg1mmi_msg_highlight_done短信编辑完成mmi_msg_entry_send_option进入发送选项2mmi_msg_highlight_send_only高亮(仅)发送选项3mmi_msg_send_msg_to_only_entry进入(仅)发送选项4mmi_msg_send_msg_reqmmi_frm_sms_send_smsmmi_frm_sms_write_actionmmi_frm_sms_read_action5mmi_frm_sms_pre_send_sms6 mmi_frm_sms_send_sms_reqmmi_frm_sms_send_sms_seg. .7mmi_frm_sms_send_sms_rspmmi_msg_send_msg_rsp HighlightWMessageHandler回到写短信菜单项2.2、发送过程详解:2.2.1、短信编辑【完成】短信编辑编辑【完成】后，按完成键盘进入发送选项单： SmsMoMtGuiInterface.c void mmi_msg_highlight_done(void) mmi_msg_highlight_generic( STR_GLOBAL_OK, IMG_GLOBAL_OK, STR_GLOBAL_BACK, IMG_GLOBAL_BACK, mmi_msg_entry_send_option, GoBackHistory); . 进入发送选项，将默认发送选项设为（仅）发送（SEND ONLY）： SmsMoMtGuiInterface.c void mmi_msg_entry_send_option(void) . if (g_msg_cntx.sendMessageCase != SEND_CASE_SEND_FROM_OTHER_APP) g_msg_cntx.sendMessageCase = SEND_CASE_SEND_ONLY; /* reset */ . 2.2.1、选择发送选项以（仅)发送（SEND ONLY）为例。在高亮事件中注册ENTRY函数： SmsMoMtGuiInterface.c void mmi_msg_highlight_send_only(void) #ifdef _MMI_SEND_BY_SEARCH_NAME_ . #else /* _MMI_SEND_BY_SEARCH_NAME_ */ mmi_msg_highlight_generic( STR_GLOBAL_OK, IMG_GLOBAL_OK, STR_GLOBAL_BACK, IMG_GLOBAL_BACK, mmi_msg_send_msg_to_only_entry, GoBackHistory); #endif /* _MMI_SEND_BY_SEARCH_NAME_ */ 2.2.2、进入【(仅)发送】选项 SmsMoMtGuiInterface.c void mmi_msg_send_msg_to_only_entry(void) . g_msg_cntx.msg_send_info.CurrSendSmsNumbers = 0; g_msg_cntx.msg_send_info.TotalSendSmsNumbers = 1; . else if (g_msg_cntx.sendMessageCase != SEND_CASE_SEND_FROM_PHB) memset(g_msg_cntx.smsPhoneNumber, 0, (MAX_DIGITS + 1) * ENCODING_LENGTH); . mmi_msg_send_msg_req(U8*) g_msg_cntx.smsPhoneNumber, MMI_FRM_SMS_INVALID_INDEX, 0); 2.2.3、设置短信发送请求标志 SmsPsHandler.c void mmi_msg_send_msg_req(U8 *number, U16 replyindex, U8 hidenumscreen) mmi_frm_sms_send_struct *sendData = OslMalloc(sizeof(mmi_frm_sms_send_struct); memset(S8*) sendData, 0, sizeof(mmi_frm_sms_send_struct); #ifdef _MMI_UNIFIED_MESSAGE_ if (!(mmi_um_get_current_msg_box_type() = UM_MSG_BOX_TYPE_UNSENT & GetExitScrnID() = SCR_ID_MSG_OUTBOX_OPTION) #else if (GetMessagesCurrScrnID() != SCR_ID_MSG_OUTBOX_SEND_OPTION) #endif sendData-sendrequire = MMI_FRM_SMS_SAVE_AFTER_FAIL; /*ML: to control if we can release EMS or not*/ . mmi_frm_sms_send_sms(mmi_msg_send_msg_rsp, MOD_MMI, sendData); OslMfree(sendData); 2.3.4、注册短信发送回调函数注册短信发送回调函数(callback, mmi_msg_send_msg_rsp), 调用短信发送预处理函数(action, mmi_frm_sms_pre_send_sms) SMSCore.c void mmi_frm_sms_send_sms(PsFuncPtrU16 callback, module_type mod_src, mmi_frm_sms_send_struct *sendData) mmi_frm_sms_send_struct *data = OslMalloc(sizeof(mmi_frm_sms_send_struct); memcpy(S8*) data, (S8*) sendData, sizeof(mmi_frm_sms_send_struct); mmi_frm_sms_write_action(callback, mod_src, data, mmi_frm_sms_pre_send_sms); U8 mmi_frm_sms_write_action(PsFuncPtrU16 callback, module_type mod_src, void *data, PsFuncPtr function) mmi_frm_sms_action_struct action; action.mod_src = mod_src; action.data = data; action.callback = callback; action.action = function; . mmi_frm_sms_action_num+; . if (mmi_frm_sms_action_curr = MMI_FRM_SMS_INVALID_NUM) mmi_frm_sms_read_action(); return TRUE; U8 mmi_frm_sms_read_action(void) PsFuncPtr currFuncPtr = mmi_frm_sms_actionmmi_frm_sms_action_head.action; void *currFuncData = mmi_frm_sms_actionmmi_frm_sms_action_head.data; . mmi_frm_sms_action_num-; . if (currFuncPtr != NULL) (*currFuncPtr) (currFuncData); . return TRUE; 2.3.5、短信发送预处理 SMSMsg.c void mmi_frm_sms_pre_send_sms(void *inMsg) mmi_frm_sms_send_struct *sendData = (mmi_frm_sms_send_struct*) inMsg; . mmi_frm_sms_free_sendsms_data(); sendSMS = OslMalloc(sizeof(mmi_frm_sms_send_struct); memcpy(S8*) sendSMS, (S8*) sendData, sizeof(mmi_frm_sms_send_struct); OslMfree(sendData); mmi_frm_sms_send_sms_req(); 2.3.6、短信发送请求 void mmi_frm_sms_send_sms_req(void) . /* check SC: get SC address, inMsg keeps the flag */ if (sendSMS-sendcheck & MMI_FRM_SMS_SC) != MMI_FRM_SMS_SC) . 首次进入 . return; /* check DA: show input screen, inMsg keeps the number */ if (sendSMS-sendcheck & MMI_FRM_SMS_DA) != MMI_FRM_SMS_DA) .二次进入, 弹出号码输入框. else if (strlen(S8*) sendSMS-number) = 0) & (sendSMS-sendrequire & MMI_FRM_SMS_REPLY) = 0) if (GetCurrScrnId() != SCR_ID_MSG_NUMBER) mmi_frm_sms_entry_number(); return; sendSMS-sendcheck = MMI_FRM_SMS_DA; /* check validity of DA */ . /* check FDL: when FDN on */ .号码输入完毕, 按确认到此. .短信内容编码. result = mmi_frm_sms_pack_sms(); .绘制发送短信发送界面. mmi_frm_sms_entry_send(); .设置短信发送回调. SetProtocolEventHandler(mmi_frm_sms_send_sms_rsp, PRT_MSG_ID_MMI_SMS_SEND_MSG_RSP); SetProtocolEventHandler(mmi_frm_sms_abort_sms_ind, PRT_MSG_ID_MMI_SMS_SEND_ABORT_START_IND); .(如果是长短信,循环)发送. for (i = 0; i msg_id = (kal_uint16) MSG_ID_MMI_SMS_DELIVER_MSG_IND;/* Set the message id */ MSG_ID_MMI_SMS_DELIVER_MSG_IND被注册到mmi_frm_sms_new_sms_ind函数：SMSMsg.cvoid mmi_frm_sms_set_protocol_event_handler(void) SetProtocolEventHandler(mmi_frm_sms_new_sms_ind, PRT_MSG_ID_MMI_SMS_DELIVER_MSG_IND);ProtocolEvents.h#define PRT_MSG_ID_MMI_SMS_DELIVER_MSG_IND MSG_ID_MMI_SMS_DELIVER_MSG_IND SEND_ILM(MOD_L4C,MOD_MMI,MMI_L4C_SAP,ilm_ptr);MMI层收到新短信，更新短信计数器，转换短信数据，并压入未读短信队列。短信过滤等操作放在CHISTIncRecvdSMS()之前。plutommimmiMiscFrameworkMiscFrameworkSrcSMSMsg.cvoid mmi_frm_sms_new_sms_ind(void *inMsg) if( ( 1 = IsBlockAndEmergencyOnly() ) delete_pending_sms(); CHISTIncRecvdSMS();/* convert L4 data to MMI data */mmi_frm_sms_convert_new_sms(msgInd, data);/* put to awaited list last entry, from now on only process new data as awaited list last entry */mmi_frm_sms_add_new_sms(data, msgInd-no_msg_data, msgInd-msg_data);/* process new sms data */mmi_frm_sms_new_sms();3.2.2、短信分类新短信的信箱类型为 MMI_FRM_SMS_AWAITS，消息类型为 mmi_frm_sms_deliver_msg_struct，必须转换为 mmi_frm_sms_msgbox_struct类型，保存到全局的msgbox，并设置其信箱类型为 MMI_FRM_SMS_UNREAD，添加其索引到inbox。plutommimmiMiscFrameworkMiscFrameworkSrcSMSCore.cvoid mmi_frm_sms_new_sms(void) . case MMI_FRM_SMS_AWAITS: mmi_frm_sms_indicate_sms(index); .plutommimmiMiscFrameworkMiscFrameworkSrcSMSCore.cvoid mmi_frm_sms_indicate_sms(U16 index)mmi_frm_sms_convert_mt_to_entry(data, entry);plutommimmiMiscFrameworkMiscFrameworkSrcSMSUtil.cvoid mmi_frm_sms_convert_mt_to_entry(mmi_frm_sms_deliver_msg_struct *data, mmi_frm_sms_msgbox_struct *entry) type = MMI_FRM_SMS_UNREAD;/ 设置短信类型 msgbox_index = mmi_frm_sms_add_sms_to_msgbox(entry, data-index, segment);/ 添加短信到inbox，关键！plutommimmiMiscFrameworkMiscFrameworkSrcSMSUtil.cU16 mmi_frm_sms_add_sms_to_msgbox(mmi_frm_sms_msgbox_struct *entry, U16 index, U8 thisseg)entryindex = mmi_frm_sms_add_sms_entry(entry, index, thisseg);plutommimmiMiscFrameworkMiscFrameworkSrcSMSUtil.cU16 mmi_frm_sms_add_sms_entry(mmi_frm_sms_msgbox_struct *data, U16 L4index, U8 thissegment) #endif /* _UNIFIED_MESSAGE_SIMBOX_SUPPORT_ */ if (data-msgtype & MMI_FRM_SMS_INBOX) = MSMS_INBOX) type = MMI_FRM_SMS_INBOX;/短信分类 mmi_frm_sms_add_sms_to_list(entry, entryindex);plutommimmiMiscFrameworkMiscFrameworkSrcSMSUtil.cvoid mmi_frm_sms_add_sms_to_list(mmi_frm_sm_msgbox_struct *data, U16 index) case MMI_FRM_SMS_UNREAD:. 添加索引到收件箱 . if (i = mmi_frm_sms_msg_check_num) mmi_frm_sms_new_msg_ind(msgbox_index); plutommimmiMiscFrameworkMiscFrameworkSrcSMSMsg.cvoid mmi_frm_sms_new_msg_ind(U16 index) if (mmi_frm_sms_interrupt_handleri.msgid = PRT_MSG_ID_MMI_SMS_DELIVER_MSG_IND) mmi_frm_sms_interrupt_handleri.callback(void*)data, MOD_MMI, MMI_FRM_SMS_OK);/callback注册的函数为mmi_msg_handle_new_msg_indplutommimmimessagesmessagessrcSmsPsHandler.cvoid mmi_msg_set_protocol_event_handler(void) mmi_frm_sms_reg_interrupt_check(MOD_MMI, PRT_MSG_ID_MMI_SMS_DELIVER_MSG_IND, mmi_msg_handle_new_msg_ind); /对比mmi_msg_set_protocol_event_handler与mmi_frm_sms_set_protocol_event_handler，这两个函数都使用了 PRT_MSG_ID_MMI_SMS_DELIVER_MSG_IND break; 3.2.3、新短信提示收到新短信之后，弹出“新短信”提示，如果当前处在待机界面，则显示新短信来自，并更改左软键为 读取。plutommimmiMessagesMessagesSrcMessagesMiscell.cvoid mmi_msg_new_msg_ind(U16 index) . #ifdef _UNIFIED_MESSAGE_SIMBOX_SUPPORT_ mmi_msg_entry_new_sim_msg_ind(); #else /* _UNIFIED_MESSAGE_SIMBOX_SUPPORT_ */ mmi_msg_entry_new_msg_ind();/新短信查看入口 .mmi_frm_sms_get_list_index(&type, &list_index, g_msg_cntx.msg_ind_index);plutommimmimiscframeworkmiscframeworksrcSMSCore.cvoid mmi_frm_sms_get_list_index(U16 *type, U16 *index, U16 msgbox_index) mmi_frm_sms_get_sms_list_index(type, index, msgbox_index);void mmi_frm_sms_get_sms_list_index(U16 *type, U16 *index, U16 msgbox_index)while (i mmi_frm_sms_inbox_size).while (i mmi_frm_sms_outbox_size).while (i mmi_frm_sms_bizbox_size)./扩展功能. mmi_msg_entry_new_msg_popup(MSG_NEW_MSG_NORMAL);/ 1. 弹出新短信提示框 #endif /* _UNIFIED