文档包括:
说明书一份,23页。12300字。
任务书一份。
课题审核表一份。
外文翻译一份。
PPT答辩稿一份。
图纸共4张,如下所示
A2-装配图4.dwg
A4-保温杯1.dwg
A4-凸模1.dwg
A4-凹模1.dwg
摘 要
塑料成型加工是将塑料原料转变为制品的关键环节。塑料成型加工及其模具技术是一门不断发展的综合学科,不仅随着高分子材料合成技术的提高、成型设备的革新、成型工艺的成熟而进步,而且随着计算机技术、数值模拟技术等在塑料成型加工领域的渗透而发展。本设计通过对模具的研究和工厂实地考察研究,分析模具结构,借鉴国内外学者的设计经验确定方案。主要研究的是塑料模的材料选取,注射机的应用,型腔布局与分型面设计,浇注系统设计,冷却系统设计,成型零件设计,模架的选用,合模导向机构设计,脱模机构设计,注射机校核,由此设计出保温杯注塑模。
关键词:塑料成型加工,热塑性塑料,注射成型技术
Insulation Cup Injection Mold Design
Abstract
The key link of changing plastic raw materials into products is the plastics molding process. Plastic processing and mold technology is an evolving integrated subject. Not only with the improving synthesis technology of the polymeric materials, the innovations of the molding equipments, the maturity of processing technology to make progress , but also with the infiltration of computer technology, numerical simulation technology and so on in the field of plastics molding process to access development. The design through the study of mold and the factory-site study, to analysis the mold structure, meanwhile,drawing on the experiences in the design of programs of scholars from home and abroad to determine the program. Major study is the materials selection of the plastic molds, the application of injection machine, the layout of cavity and the design of regional type, the design of gating system, the design of cooling system, the design of prototyping parts, die-selection, mold design-oriented institutions, the design of ejection mechanism, the check of injection machine, then we can design the injection mold of insulation cup.
Keywords:Plastic Molding Of Plastics Processing Raw Materials Into Products, Thermoplastic , The Injection Takes Shape The Technology
目 录
1 绪论 1
2 制件分析 1
3 计算制件的体积和质量 3
4 制件注射成型工艺参数 4
5 注射模的结构设计 6
5.1 型腔数目的确定 6
5.2 型腔的排列方式 6
5.3 分型面的选择 6
6 浇注系统设计 8
7 冷却系统设计 11
8 成型零件设计 11
8.1 成型零件的结构设计 11
8.1.1 凹模结构设计 11
8.1.2 型芯结构设计图 11
8.2 成型零件尺寸计算 13
8.3 型腔壁厚计算 14
9 模架的选用 15
10 合模导向机构设计 15
11 脱模机构设计 17
11.1 脱模机构设计的总体原则 17
11.2 推出机构设计 18
11.3 浇注系统凝料脱模机构 18
12 注射机校核 19
12.1 注射量、锁模力、注射力、模具的厚度的校核 19
12.2 开模行程的校核 19
13 结束语 19
谢 辞 20
参考文献 21
一、论文(设计)主要内容及主要技术指标
1.主要内容
要求设计出能生产出保温杯的注塑模具。
2.技术指标
(1)能够合理的进行制件分析。
(2)能够完成凸模和凹模的结构设计。
(3)能够选择合理的模架。
(4)能够完成合模导向机构和脱模机构的设计。
(5)成型过程中保证精度要求和注射机的校核。
二、 毕业论文(设计)的基本要求
1.毕业设计(论文)一份:有400字左右的中英文摘要,正文后有15篇左右的参考文献,正文中要引用5篇以上文献,并注明文献出处。论文字数在6000字以上。
2.有不少于2000汉字的与本课题有关的外文翻译资料。
3.毕业设计总字数在10000字以上。
4.模具装配图 一套(要求:有CAD图或手绘图)。
三、毕业论文(设计)进度安排(非师范专业)
1. 2007年1月8日-1月20日,下达毕业设计任务书;寒假期间完成外文资料翻译和开题报告。
2. 2007年3月5-11日(第1周),指导教师审核开题报告和设计方案。
3. 2007年3月12日-4月15日(第2-6周),毕业设计单元部分设计。
4. 2007年4月16-22日(第7周),毕业设计中期检查。
5. 2007年4月16日-5月13日(第7-10周),整理、撰写毕业设计(论文)。
6. 2007年5月14-20日(第11周)上交毕业论文,指导、评阅教师审查评阅论文,毕业设计答辩资格审查,学生修改整理论文,毕业设计(论文)答辩。



