关 键 词：

含11张CAD图纸、说明书全稿 数控车床 自动 回转 刀架 机电 系统 设计 11 CAD 图纸 说明书

资源描述：

购买设计请充值后下载，，资源目录下的文件所见即所得，都可以点开预览，，资料完整，充值下载就能得到。。。【注】：dwg后缀为CAD图，doc,docx为WORD文档，有不明白之处，可咨询Q:414951605

内容简介：

摘 要自动回转刀架是数控机床的重要组成部分，它有效地提高了劳动生产率，缩短了生产准备时间，消除人工误差提高加工精度和加工精度的一致性等。但是传统的普通车床换刀的速度慢、精度不高，生产效率低，不能适应现代化生产的需要。所以为了提高生产率、改善产品质量以及改善劳动条件必须对自动回转刀架进行改进。本文对数控车床自动回转刀架的机电系统的相关内容进行分析，研究数控车床刀架的组成和工作原理，对普通机床的换刀装置进行改进，使该装置具有自动松开、转位、精密定位等功能。此次主要完成自动回转刀架的机械部分和电气部分的设计。机械部分为对其组成的各个机械部件进行计算与选用，电气部分为编制刀架自动转位控制软件。设计的数控換刀装置功能更强，换刀装置通过刀具快速自动定位，可以提高数控车床的效率，缩短加工时间；同时其可靠性更稳定，结抅简单。关键词: 自动回转刀架，换刀装置，机电系统，电气控制Design of automatic turret mechanical and electrical system of CNC lathesAbstractThe automatic turret is an important part of CNC lathe. It improved labor productivity and shorten the production time, eliminate human error, the improvement of the machining accuracy and consistency of precision. Though conventional ordinary lathe tool change slowly, low accuracy, low productivity. It cannot adapt to the needs of modern production. Therefore, we must be improved the automatic turret in order to increase productivity, improve product quality and improve working.This rotary tool holder for CNC lathe electrical and mechanical systems related content study, study the composition and working principle of CNC lathes turret and improve the tool changerthe of general machine tools, so that the device has an automatic release, transfer, precision positioning and other functions. This time we should completion of the design of automatic turrets the mechanical parts and electrical parts. Mechanical part is composed of various mechanical calculation and selection of parts, electrical parts is preparation of the turret automatically transfer of the control software, automatic indexing turret. Design of more powerful CNC tool changer, tool changer quickly through the automatic positioning tool can improve the efficiency of CNC lathes and shorten the processing time; while its reliability is more stable, the structure is simpler.Keywords: Automatic turret Tool changer Electro-Mechanical Systems Electrical control目 录1绪 论11.1自动回转刀架的设计背景11.2自动回转刀架的市场分析21.3设计自动回转刀架的意义22自动回转刀架总体设计32.1总体方案的确定32.2减速机传动机构的确定42.3刀体锁紧与精定位机构的确定52.4抬起机构的确定53自动回转刀架机械部分设计63.1自动回转刀架的工作原理63.2蜗轮及蜗杆的设计及校核83.2.1蜗杆的选型93.2.2蜗杆副的材料103.2.3按齿面接触疲劳强度进行设计103.3蜗轮及蜗杆的主要参数与几何尺寸123.4螺杆的主要参数与几何尺寸143.4.1螺杆的设计计算143.5蜗杆轴的设计153.5.1蜗杆轴的材料选择，确定许用应力153.5.2按扭转强度初步估算轴的最小直径153.5.3确定各轴段的直径和长度163.5.4蜗杆轴的校核173.6蜗杆轴的轴承选用214自动回转刀架电气部分设计224.1硬件电路设计224.2控制软件设计254.2.180C31单片机及其引脚说明264.2.2 静态存储器6264的特性284.2.3 2764只读存储器