文档包括:
说明书一份,28页,13100字左右.
图纸共4张,如下所示
A0-装配图.dwg
A3-法兰.dwg
A3-飞轮.dwg
A3-轴.dwg
目 录
1 绪论 1
1.1 课题背景及意义 1
1.2 国外研究概况 2
1.3 国内ABS的研究情况 3
1.4 ABS的发展趋势 3
1.5 ABS性能试验台 4
1.6 ABS试验台的必要性 4
2 ABS的结构及工作原理 5
2.1 ABS的形式及工作原理 5
2.2 ABS的功能及优点 7
2.3 ABS控制技术 7
2.4 ABS(防抱死)制动压力控制 9
2.5 ABS的质量控制 10
2.6 制动时车轮受力分析 10
2.7 滑移率 12
2.8 车轮制动与车轮的旋转 14
2.9 车轮减速度和-S特性 15
3 试验台系统结构和工作原理 17
3.1 机械系统 17
3.2 电机调速系统 17
3.3 试验台的结构 17
3.4 试验台工作过程 18
3.5 系统的飞轮设计 19
3.6 法兰盘设计 21
3.7 系统的加力装置 22
3.8 试验台结构架 24
结束语 25
致谢 26
参考文献 27
毕业设计说明书(论文)中文摘要
本论文论述了ABS的意义,国内外的研究情况,ABS的发展趋势,以及研究ABS试验台的必要性。同时鉴于本课题还说明了ABS制动装置的工作原理,功能及特点,同时还简单介绍了ABS的制动压力控制,质量控制,制动时车轮的受力分析,滑移率。试验台部分主要说明了试验台的系统结构和工作原理,工作过程,系统的飞轮设计,法兰盘设计,以及系统的加力装置,其中加力装置分为两种,砝码式的和弹簧式的,最后说明了整个装置的结构架。
关键词 ABS 试验台 制动装置 结构。
毕业设计说明书(论文)外文摘要
Title The Design of Test-bed of Anti-Skid Brake System device of The Motorcycle
Abstract
This discourse discuss the ABS's significance, demestic study and overseas study about ABS, the history of ABS and the necessary of the ABS's study. The discourse discuss the ABS's work principle, function and traits,at the same time ,it discourse the ABS's control of the pressure, mass ,the analyse of the wheel's mechanics, the slippage rate. The part of the test-bed mainly discuss the framework of the test-bed, its work's principle ,work's process, the design of the system's flywheel and the flange, and the system's add force device, which is divide into two kinds, the form of the weight and the form of spring .At last it shows that the frame of the whole device.
Keywords ABS Test-bed Device Frame




