铸造专业词汇翻译小部分

冷珠cold shot 等温退 火isothermal annealing 冷界cold shut 等温线 图isothermal diagram 冷加工cold work working 等温硬 化isothermal hardening 结晶水combined water 等温变 态 isothermal transformation 晶粒粗化grain enlargement顶出力ejector force 晶粒生长grain growth顶板ejection plate 晶粒细化grain refinement顶出ejection 晶粒细化剂grain refiner 顶出器 喷射器ejector 晶粒大小 grain size顶出销ejector 晶粒组织grain structure顶出板ejector plate 晶粒度graininess挡板baffle baffle plate 净重net weight袋虑气bag filter 袋虑室bag house 吊环bail 合模面joint face surface 合模飞边joint fin flash 连 续 熔 解 continuous melting 合模线 joint line assembly line 连 续 混 砂 机 continuous sand mill 合模填缝 封条joint sealing 连 续 砂 处 理 厂 continuous sand plant 合模assembly 连 续 干 燥 炉continuous stove 合模记号assembly mark 连 续 出 铁 continuous tapping 化合碳combined carbon 粒 度grading 含粘土分containing clay 冷 硬 深 度depth of chill 含量content 冒口颈riser neck 耐火 捣料 refractory ramming compound 冒口垫riser pad 耐火 泥浆refractory wash 冒口流道riser runner 内摩 擦internal friction 模内球化处理法inmold process 内缩 孔 internal prosity shrinkage 毛重 总重gross weight 内应 力internall stress 面砂facing sand内裂internal tearing 面板facing plate 逆麻 口inverse mottle 冒口渗出exuding of the head 逆偏 析 inverse segregation 发热冒口exothermic riser 逆冷 硬internal chill 木炭charcoal 内冷 铁internal chill 木炭生铁 charcoal iron pig iron 凝析 石墨kish graphite 木炭粉charcoal powder 凝析 石墨 夹渣 kish graphite inclusions 凝析 石墨 斑孔 kish graphite spots 配料计算 calculation of charge 片状石墨flake graphite 片flake 片状石墨铸 铁 flake graphite cast iron 耐热 性heat resistance 耐热 合金 heat resisting alloy 耐热heat resisting cast 铸刚steel 耐热 铸铁 heat resisting cast iron 缩孔 shrink hole shrinkage cavity hole有效黏土含量 effective clay content 缩陷处shrink mark有效高度 effective height 缩孔倾向 shrinkage cavity tendency 缩裂shrinkage crack 缩管shrinkage pipe 铸造状态a