MS安装.doc

一 、在msi用户下安装msinode1 MS6$ ./install (此处与ms5.5 不同)注意：要用非root用户安装, 过程中均默认即可。装完后，先选99 enter，接下来装License。五、若没有图形界面的话，用命令行方式导入licenses：(1) 先将msi70.lic文件第一行中的机器名改为你的主节点的机器名，放 到/home/msi/Accelrys/LicensePack/Licenses里(2) cd /home/msi/Accelrys/MaterialsStudio7.0/bin(3) ./license_admin -cw 输出信息：1) Enter temporary license password2) Set connection to license server3) List command line license administration tools99) Finished with license configuration选3) 输出Accelrys License AdministrationSet up the license administration environment=csh source $ACCELRYS_LIC_PACK_DIR/etc/lp_cshrcORsh$ . $ACCELRYS_LIC_PACK_DIR/etc/lp_profileStart GUI License Administrator (Linux Only)= lp_adminCommand line tools (All UNIX platforms)Command Name Description- -lp_request Request a license filelp_install Install license filelp_server Manager license server ORSet remote server connectionlp_status License configuration statuslp_tester Test license configuration(Use -h argument for usage information)=Documentation=Complete online documentation is available viathe License Administrator Help on Windows/Linux. All other platforms can access documentation using:/LicensePack.htmlPress to continue:1) Enter temporary license password2) Set connection to license server3) List command line license administration tools99) Finished with license configurationChoose one of the above options:选99)(4) 执行 source /home/msi/Accelrys/LicensePack/etc/lp_profile或cd /home/msi/Accelrys/LicensePack/etc/ 再执行 lp_set_env(5) cd /home/msi/Accelrys/LicensePack/Licenses/执行: lp_install msi70.lic 输出信息msinode1 Licenses$ lp_install ms60.licBacking up existing license to Licenses/backup directory.The license file has been successfully installed under /home/msi/Accelrys/LicensePack/Licenses/msi.lic.Attempting to start the server.The license server could not be started. Refer to the License Pack documentation or contact Accelrys Scientific and Technical Support for assistance.Attempting checkout.Checked out license feature: License_Holder for msi (1 copy)Checkout succeeded.Run lp_set_envORcsh: source /home/msi/Accelrys/LicensePack/etc/lp_cshrcsh: . /home/msi/Accelrys/LicensePack/etc/lp_profileto refresh shell license administration environment setup.(6)完成(8)修改/home/msi/Accelrys/MaterialsStudio7.0/etc/Gateway/root_default/dsd/conf文件夹里面两个文件里的CPU数为各节点CPU总数。gwparams.cfg中 gw_cpucorestotal=48gw-info.sbd 中 cpucorestotal=48修改 ip ?(9)重新启动网关，进入/home/msi/Accelrys/MaterialsStudio7.0/etc/Gateway，执行./msgateway_control_18888 restart(10)因之前安装的时候未将Gateway注册为自动启动服务的话，可执行下面的命令：在root下cp /home/msi/Accelrys/MaterialsStudio7.0/etc/Gateway/msgateway_control_18888 /etc/init.d/msgateway_control_18888 chkconfig -add msgateway_control_18888切记关闭防火墙：setup ，第二行 ， enter选中 ， 空格取消【*】，再确定！在root主目录下# chkconfigbash: chkconfig: command not found# rpm -aq |grep chkconfigchkconfig-1.3.30.1-2# export PATH=/sbin:$PATH# chkconfigchkconfig version 1.3.30.1 - Copyright (C) 1997-2000 Red Hat, Inc.This may be freely redistributed under the terms of the GNU Public License.usage: chkconfig -list name chkconfig -add chkconfig -del chkconfig -level # echo $PATH/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home