Netbackup 7.1安装测试文档_v1.2.doc

NetBackup 7.1安装测试文档Version 1.2Submitted by:Symantec Consulting Services星期三, 二月 15, 20121Symantec Consulting ServiceStatement of ConfidentialityThis confidential information is being provided to Symantec as a deliverable of this consulting engagement. The sole purpose of this document is to provide you with the results of, and recommendations derived from this consulting engagement. Each recipient agrees that, prior to reading this document, it shall not distribute or use the information contained herein and any other information regarding Symantec for any purpose other than those stated.Contents1安装备份服务器（Windows）42安装Master Server（Redflag AS3）163安装Media Server（Redflag AS3）174安装Client（Redflag AS3）185新建备份策略196Oracle数据备份277Oracle数据恢复301 安装备份服务器Master Server（Windows）1 用记事本打开C:WindowsSystem32driversetchosts，添加与备份有关所有服务器的IP地址与主机名对应表，如下所示： localhost /本行为系统自带，一定要保留:1 localhost /本行为系统自带，一定要保留01 HPA /集群实机IP地址与实机主机名02 HPB /集群实机IP地址与实机主机名00 HP /集群虚IP地址与虚机主机名50 HP6 /备份服务器IP地址与主机名2 找到Netbackup 7.1备份服务器安装文件的位置，并双击打开；3点击Browser.exe运行Netbakcup 7.1备份软件安装向导；4在安装向导界面的左侧边栏找到Installtion，点击进入安装向导；5在向导的右侧边栏点击Server Software Installation，安装备份服务器； 6点击Next； 7同意许可协议，点击Next； 8选中Install to this computer only，点击Next； 9输入Master Server的License Key，灰色的Netbackup Master Server图标就会自动激活，点击激活的Netbackup Master Server图标； 10输入Master Server Name为备份服务器的主机名，点击Next； 11确认Netbackup的安装信息，点击Install； 12Netbackup的Master Server安装正在运行； 13正在创建Netbackup备份软件自身的数据库； 14Netbackup安装完成，此时可以点击Add Keys添加除Master Server以外的Lisence Key； 15打一Add Key窗口，点击黄色的星形符号添加新的Lisence Key，添加完成后点Close； 16Netbackup Master Server安装完成后，自动打开Master Server图形化界面，此时界面为全英文界面； 17找到Netbackup 7.1的中文语言包，双击打开； 18点击Install进行安装，在向导中点击Netbackup Chinese Laguage Pack Installtion； 19点击Next； 20点击Next； 21点击Install安装Netbackup中语言包； 22Netbackup中文语言包正在安装； 23安装完成，点击Finish； 24在开始-所有程序-Symantec Netbackup中点击Netbackup administrator Console运行备份软件控制台； 25此时打开的控制台为全中文界面，至此备份服务器Master Server安装完毕； 26. 在Master Server上创建空文件C:Program FilesVERITASNetBackupdbaltnamesNo.Restrictions。具体方式为打开C:Program FilesVERITASNetBackupdb文件夹，在此文件夹下新建一个文件夹，重命名为altnames，打开altnames文件夹，新建文件文档，重命名为No.Restrictions，没有后缀，如下所示：27.打开Master Server控制台，在控制台图形化界面的左侧边栏找到“主机属性-并点击主服务器”，在右侧空白区域找到Master Server主机，如下图所示：28.双击Master Server主机图标，找开Mater Server主机属性，选择左侧边栏的“全局属性”，在右侧属性能，将作业重试延迟改为5分钟，每个客户端最多作业数改为3，日程表备份尝试次数改为10次/1小时，最多备份副本数改为2，其它参数不变。目的是实现备份软件作业正在运行时，突然双机集群切换，备份失败的备份任务会在指定时间内，集群的另一台服务器上重新运行作业，以避免由于集群切换造成的数据损失。具体参数修改如下图所示：29.Master Server主机全局参数修改完毕后，系统提示，要重启Netbackup备份软件服务，点确定，将备份软件控制台关闭，在桌面上点击“开始-运行-输入CMD-回车”打开MS-DOS对话框，运行如下命令：（注：如运行命令系统提示尚有一部分服务服务未关闭或启动成功，请重复运行命令）30.重新启动Netbackup备份软件服务后，再打开控制台，控制台参数已经设备好了。2 安装备份服务器Master Server（Redflag AS3）注：此部分安装是选装，如果备份服务器采用Windows服务器，那么，此部可以跳过。赛门铁克Netbackup7.1备份软件服务器端也就是管理控制台不但支持Windows环境，还支持安装在Linux甚至Unix环境，此文档是在RedFalg DC5中的安装过程脚本文档。1、将备份系统中的所涉及的服务器的主机名与IP地址添加到host表中，以便于备份系统能够通过主机名解析服务器IP地址。2、上传Netbackp Linux Master Server软件通过SSH Secure Shell Client远程SSH管理工具或其它方式将Netbackup 7.1的Linux Master Server软件上传到RedFlag备份控制台服务器(bfxt)；3、解压缩并安装Netbackp Linux Master Server软件；在备份控制台服务器HP6上进入安装文件目录，然后通过tar zxvf命令将安装文件的压缩包，解压到一个NB_7.1_LinuxR_x86_64_GA的目录，进入此目录后运行./install安装，安装脚本如下所示：rootbfxt nbu_anzhuangwenjian# cd NetBackup_7.1_LinuxR_x86_64rootbfxt NetBackup_7.1_LinuxR_x86_64# ./install Symantec Installation ScriptCopyright 1993 - 2011 Symantec Corporation, All Rights Reserved. Installing NetBackup Server SoftwareDo you wish to continue? y,n (y) /提示是否继续安装软件，默认选择“y”The NetBackup and Media Manager software is built for use on LINUX_RH_X86 hardware.Do you want to install NetBackup and Media Manager files? y,n (y) /提示安装Netbackup备份服务器和介质管理软件，默认选择“y”NetBackup and Media Manager are normally installed in /usr/openv.Is it OK to install in /usr/openv? y,n (y) /提示是否将软件安装到默认目录“/usr/openv”，默认选择“y”Reading NetBackup files from /usr/nbu_anzhuangwenjian/NetBackup_7.1_LinuxR_x86_64/linuxR_x86/anbusr/openv/db/usr/openv/db/scripts/usr/openv/db/scripts/bmr.sqlusr/openv/db/scripts/BMRDB..sqlusr/openv/db/scripts/BMRDB.downgrade..sqlusr/openv/db/scripts/BMRDB..sqlusr/openv/db/scripts/BMRDB.downgrade..sqlusr/openv/db/scripts/BMRDB..sqlusr/openv/db/scripts/BMRDB.downgrade..sqlusr/openv/db/scripts/BMRDB..sqlusr/openv/db/scripts/BMRDB.downgrade..sqlusr/openv/db/scripts/BMRDB.6.0.sqlusr/openv/db/scripts/BMRDB.downgrade..sqlusr/openv/db/scripts/BMRDB..sqlusr/openv/db/scripts/BMRDB.downgrade..sqlusr/openv/db/scripts/BMRDB..sqlusr/openv/db/scripts/BMRDB.downgrade..sqlusr/openv/db/scripts/BMRDB..sqlusr/openv/db/scripts/BMRDB.downgrade..sqlusr/openv/db/scripts/BMRDB..sqlusr/openv/db/scripts/BMRDB.downgrade..sqlusr/openv/db/scripts/BMRDB..sqlusr/openv/db/scripts/BMRDB.6.5.sqlusr/openv/db/scripts/BMRDB.upgrade.ctlusr/openv/db/scripts/BMRDB.downgrade..sqlusr/openv/db/scripts/BMRDB..sqlusr/openv/db/scripts/BMRDB.7.0.sqlusr/openv/db/scripts/BMRDB.install.sqlusr/openv/db/scripts/emmDeviceMapping_proc_p.sqlusr/openv/db/scripts/emmGetNextRobotIndex_proc_p.sql（中间有大量的安装脚本，无需人工干预，故省略一部分）usr/openv/volmgr/help/robots/TLM/vsninnonaccdriveusr/openv/volmgr/help/robots/TLM/vsnonothersystemusr/openv/man/man1/tlmd.1.gzusr/openv/volmgr/bin/make_scsi_devDone executing NB.inst.If you ran NB.inst instead of /install, you mustrun /usr/openv/netbackup/bin/install_bp to initiate NetBackup.Running /usr/openv/netbackup/bin/install_bpCopying RedHat2.6 Client BinariesInstalling PBX.Same version is already installed. Nothing to upgrade for package VRTSpbxInstallation log located here: /var/tmp/installpbx-11884-010612101932.logUnpacking SYMCnbclt package.Checking for pre-existing SYMCnbclt package.Installing SYMCnbclt package.Installation of SYMCnbclt was successful.More details regarding SYMCnbclt can be found in file/tmp/install_cltpkg_trace.11865 on bfxt.Terminating NetBackup and/or Media Manager processes.Installing NB-Java.Unpacking SYMCnbjava package.Checking for pre-existing SYMCnbjava package.Installing SYMCnbjava package.Installation of SYMCnbjava was successful.More details regarding SYMCnbjava can be found in file/tmp/install_javapkg_trace.12595 on bfxt.Unpacking SYMCnbjre package.Checking for pre-existing SYMCnbjre package.Installing SYMCnbjre package.Installation of SYMCnbjre was successful.More details regarding SYMCnbjre can be found in file/tmp/install_jrepkg_trace.12595 on bfxt.+ /bin/cp ./nbj.conf /usr/openv/javaDirectory /usr/openv/logs does not exist.No log files to migrate.+ Extracting PDDE server package (/usr/openv/pddeserver.tar.gz).+ Extracting PDDE agent package (/usr/openv/netbackup/client/Linux/RedHat2.6/pddeagent.tar.gz).Unpacking SYMCpddea package.Checking for pre-existing SYMCpddea package.Installing SYMCpddea package.Creating /etc/pdregistry.cfg.Copying pdregistry.cfg file to /usr/openv/pdde/pdconfigure/cfg/userconfigs/pdregistry.cfg.Starting setup for PDDE scriptDone setup for PDDE scriptChecking to see if the PDDE configuration needs upgradingpdregistry.cfg exists.No existing PDDE configuration detected.PDDE install finished successfully.The following automatic startup and shutdown scripts (respectively)have been installed. They will cause the NetBackup daemons to beautomatically shut down and restarted each time the system boots./etc/rc.d/rc2.d/S77netbackup/etc/rc.d/rc3.d/S77netbackup/etc/rc.d/rc5.d/S77netbackup/etc/rc.d/rc0.d/K01netbackup/etc/rc.d/rc1.d/K01netbackup/etc/rc.d/rc6.d/K01netbackupInstallation of Java LiveUpdate agent succeeded. Refer to file/tmp/JLU-Log/JavaLiveUpdate-Install.log on bfxtfor installation details.Checking LiveUpdate registration for the following products: NB This may take a few minutes.Product NB is installed and will be registered.Updating LiveUpdate registration now.this may take some time.A NetBackup Server or Enterprise Server license key is neededfor installation to continue.Enter license key:DJXL-H3OP-P6YP-PPPN-PPEEE-3RPB-P3P3-83PN-34P /这里输入Master Server的序列号DJXL-H3OP-P6YP-PPPN-PPEEE-3RPB-P3P3-83PN-34P: NetBackup Server Base product with the following features enabled: Open File Backup Remote Client Support Robotic Library Sharing Support Microsoft RSM Robotic Libraries Inline Tape Copy has been registered.All additional keys should be added at this time.Do you want to add additional license keys now? y,n (n)/提示是否还要继续添加Lisence，继续添加输入（y），在这里不继续添加，输入（N）Installing NetBackup Server version: 7.1If this machine will be using a different network interface than thedefault (bfxt), the name of the preferred interface should be usedas the configured server name. If this machine will be part of acluster, the virtual name should be used as the configured server name.Would you like to use bfxt as the configuredNetBackup server name of this machine? y,n (y) 提示是否以HP6命名这台Master Server，默认选择（y）Checking network connections.bp.conf: IP_ADDRESS_FAMILY = AF_INET: default value, no update neededSending SIGHUP to xinetd process.重新载入配置： 失败 /这里提示失败是正常的Converting STREAMS files. This may take a few minutes.STREAMS files conversion is complete.Successfully updated the session cache parameters.Starting the NetBackup network daemon.Starting the NetBackup client daemon.Starting the NetBackup SAN Client Fibre Transport daemon.Creating /usr/openv/tmp/sqlanyInstalled SQL Anywhere Version 475Installation completed successfullyset_value: Key AZDBPasswordFilePath successfully updatedAZ database setup complete.Database server is NB_bfxtCreating the NetBackup database.Creating NetBackup staging directory in: /usr/openv/db/stagingCreating /usr/openv/db/stagingStarting the NetBackup database.Authenticating the NetBackup database.VXDBMS_NB_DATA entry in bp.conf updated successfully.Setting of database authentication for NBDB successful.Change of dba password for NBDB successful.Creating the NetBackup database files.Creating the NetBackup EMM schema.Verifying the running version of NBDB .NBDB version verified.Nothing to upgrade. Version unchanged.Database NBDB validation successful.Database NBDB is alive and well on server NB_bfxt.Creating the NetBackup Authorization database.Starting the NetBackup Event Manager.Starting the NetBackup Audit Manager.Starting the NetBackup Deduplication Manager.Starting the NetBackup Deduplication Engine.Starting the NetBackup database manager process (bpdbm).Creating Directive Set for LotusNotesCreating Directive Set for MS_Exchange_MailboxCreating Directive Set for MS_Exchange_DatabaseCreating Directive Set for MS_Exchange_Public_FoldersCreating Directive Set for MS_Exchange_Database_Availability_GroupsCreating Directive Set for MS_SharePoint_Portal_ServerCreating Template Set for Oracle_RMANCreating Template Set for Oracle_XML_ExportCreating Template Set for DB2Creating Directive Set for Windows2003Creating Directive Set for Windows2008Creating Directive Set for Enterprise_Vault_7.5Creating Directive Set for Enterprise_Vault_8.0Creating Directive Set for Enterprise_Vault_9.0Creating Directive Set for Enterprise_Vault_10.0Converting snapshot policies:Policy conversion summary: Number of original policies: 0 Number of non-snapshot policies skipped: 0 Number of policies not needing conversion: 0 Number of policies converted to auto snapshot method: 0 Number of policies converted: 0Updating client hardware definitions:Hardware update conversion summary: Number of policies processed: 0 Number of policies with affected clients: 0 Number of clients processed: 0 Number of clients converted: 0 Number of Disaster Recovery flags cleared: 0Starting the NetBackup compatibility daemon.Starting the NetBackup Enterprise Media Manager.Starting the NetBackup Resource Broker.Populating the database tables. This will take some time.Starting the Media Manager device daemon processes.Starting the NetBackup request daemon process (bprd).Starting the NetBackup Job Manager.Starting the NetBackup Policy Execution Manager.Starting the NetBackup Storage Lifecycle Manager.Starting the NetBackup Remote Monitoring Management System.Starting the NetBackup Key Management daemon.Starting the NetBackup Service Layer.Starting the NetBackup Agent Request Server.Starting the NetBackup Bare Metal Restore daemon.Starting the NetBackup Vault daemon.Starting the NetBackup Service Monitor.Starting the NetBackup Bare Metal Restore Boot Server daemon.OpsCenter is the next-generation monitoring, reporting andadministrative solution designed to centrally manage one ormore NetBackup installations from a web browser. ExistingNetBackup Operations Manager or Veritas Backup Reporterinstallations can be upgraded to OpsCenter.If an OpsCenter server already exists in your environmentor you plan to install one, enter the real hostname of thatOpsCenter server here. Do not use a virtual name. If youdo not want this local machine to be an OpsCenter server,enter NONE.Enter the OpsCenter server (default: bfxt): Registering OpsCenter (bfxt) with NBSuccessfully registeredRegistering NB with OpsCenter (bfxt)Failed to register NetBackup with OpsCenter. Check to see if the specified OpsCenter is accessibleUnable to register machine bfxt with OpsCenter.Refer to the log file in /usr/openv/netbackup/logs/nbregopscfor more information. When the problem has beenresolved, register the machine by executing:/usr/openv/netbackup/bin/admincmd/nbregopsc -add bfxtNetBackup server installation complete.File /usr/openv/tmp/install_trace.11332 contains a trace of this install.That file can be deleted after you are sure the install was successful.4、管理控制台连接（Master Server控制台界面登陆）可以Xmanater连接Linux的图形界面，运行/usr/openv/netbackup/bin/.jnbSA打开控制台，也可以在任意一台windows服务器或台式机安装“Java Windows Administration Console JAVA控制台”实现Master Server控制台界面的远程管理。登录成功后界面3 安装Client（Redflag AS3）1、将备份系统中的所涉及的服务器的主机名与IP地址添加到host表中，以便于备份系统能够通过主机名解析服务器IP地址。如下图所示： localhost /本行为系统自带，一定要保留:1 localhost /本行为系统自带，一定要保留01 HPA /集群实机IP地址与实机主机名02 HPB /集群实机IP地址与实机主机名00 HP /集群虚IP地址与虚机主机名50 HP6 /备份服务器IP地址与主机名2、上传Netbackp Linux Client软件通过SSH Secure Shell Client远程SSH管理工具或其它方式将Netbackup 7.1的Linux Client软件上传到RedFlag客户端服务器上，包括7台Oracle服务器和10台文件服务器；3、解压缩Netbackp Linux Client软件；先将安装源拷到客户端服务器上，然后通过tar zxvf 命令将客户端软件压缩包解压到一个NB_7.0_CLIENTS_GA的目录，进入后运行./install安装rootapp1 nbu_client# ./install Symantec Installation ScriptCopyright 1993 - 2011 Symantec Corporation, All Rights Reserved. Installing NetBackup Client SoftwareDo you wish to continue? y,n (y) /提示是否继续安装软件，默认选择（y）Do you want to install the NetBackup client software for this client? y,n (y) /提示在这台服务器上安装Netbackup客户端软件，默认选择（y）This package will install Linux/RedHat2.6 client.This package will install NetBackup client 7.1.Enter the name of the NetBackup server : HP6/提示输入Netbackup Master Server的名字，在此输入”HP6”Would you like to use HPA as the configuredname of the NetBackup client? y,n (y) /提示是否为本台服务器的主机名“HPA”命名Netbackup Client，默认选择（y）Installing PBX.Please wait while installation is in progress.Installation completed SuccessfullyInstallation log located here: /var/tmp/installpbx-25784-010612115203.logUnpacking SYMCnbclt package.Checking for pre-existing SYMCnbclt package.Installing SYMCnbclt package.Installation of SYMCnbclt was successful.More details regarding SYMCnbclt can be found in file/tmp/install_cltpkg_trace.25717 on app1.Terminating NetBackup and/or Media Manager processes.Installing NB-Java.Unpacking SYMCnbjava package.Checking for pre-existing SYMCnbjava package.Installing SYMCnbjava package.Installation of SYMCnbjava was successful.More details regarding SYMCnbjava can be found in file/tmp/install_javapkg_trace.26585 on app1.Unpacking SYMCnbjre package.Checking for pre-existing SYMCnbjre package.Installing SYMCnbjre package.Installation of SYMCnbjre was successful.More details regarding SYMCnbjre can be found in file/tmp/install_jrepkg_trace.26585 on app1.+ /bin/cp ./nbj.conf /usr/openv/javaDirectory /usr/openv/logs does not exist.No log files to migrate.Checking network connections.bp.conf: IP_ADDRESS_FAMILY = AF_INET: default value, no update neededNo xinetd process found.+ Extracting PDDE agent package (/usr/nbu_client/NBClients/anb/Clients/usr/openv/netbackup/client/Linux/RedHat2.6/pddeagent.tar.gz).Unpacking SYMCpddea package.Checking for pre-existing SYMCpddea packag