OSPF多区域配置实验报告.docx

安徽工业经济职业技术学院 计算机与艺术专业计算机网络技术 31714 周琦实验名称：OSPF多区域的配置实验目的：（1）：掌握OSPF多区域基本配置方法（2）:实现全网互通性（3）:通过更改优先级实现路由器对不同路径的选择实验拓扑图：实验步骤:(1):设置IP地址R0:Router(config)#hostname R0R0(config)#interface f0/1R0(config-if)#ip address 10.0.2.254 255.255.255.0R0(config-if)#ip address 10.0.2.254 255.255.255.0R2:Router(config)#hostname R2R2(config)#interface f0/0R2(config-if)#ip address 20.0.0.254 255.255.255.0R3:Router(config)#hostname R3R3(config)#interface s1/1R3(config-if)#ip address 40.0.0.2 255.255.255.0R3(config-if)#no shutdown（2）：进入ospf及区域的划分R0：Router(config-if)#exitRouter(config)#router ospf 100Router(config-router)#router-id 1.1.1.1Router(config-router)#network 10.0.1.1 0.0.0.255 area 0Router(config-router)#network 10.0.2.1 0.0.0.255 area 0Router(config-router)#network 30.0.0.1 0.0.0.255 area 0R2Router(config)#router ospf % Incomplete command.Router(config)#router ospf 200Router(config-router)#router-id 2.2.2.2Router(config-router)#network 30.0.0.2 0.0.0.255 area 0 00:23:21: %OSPF-5-ADJCHG: Process 200, Nbr 1.1.1.1 on Serial1/1 from LOADING to FULL, Loading DoneRouter(config-router)#network 20.0.1.254 0.0.0.255 area 1Router(config-router)#network 40.0.0.1 0.0.0.255 area 1R3:Router(config)#router ospf 300Router(config-router)#router-id 3.3.3.3Router(config-router)#network 40.0.0.2 0.0.0.255 area 100:27:56: %OSPF-5-ADJCHG: Process 300, Nbr 2.2.2.2 on Serial1/1 from LOADING to FULL, Loading DoneRouter(config-router)#network 50.0.1.254 0.0.0.255 area 2实验结果：在PC0上pingPC2：PCping 50.0.1.1Pinging 50.0.1.1 with 32 bytes of data:Reply from 10.0.1.254: Destination host unreachable.Reply from 10.0.1.254: Destination host unreachable.Reply from 10.0.1.254: Destination host unreachable.Reply from 10.0.1.254: Destination host unreachable.Ping statistics for 50.0.1.1:Packets: Sent = 4, Received = 0, Lost = 4 (100% loss)