常用螺栓、螺丝图解VIP

常用螺栓、螺丝图解d=(0.06+0.013*n)*25.4 其中N表示如#4，#6#8#10等，D则等于换算出的公制尺寸美制牙为55度角,美制都是用牙数表示,公制是用牙距表示,例如:英制1/2-12美制1/2-13公制M12-1.75 MSmachine screw, HTheat treatment.pan head hex drive盘头六角槽1/4-20: 螺紋直徑1/4” ,1”(25.4mm)有20個牙马氏体不锈钢SUS410Self-drilling screws自钻自攻钉Wafer Head with Washer Self-drilling Screws Zinc plated大扁头带垫自钻自攻钉Drywall Self-drilling Screws Black Oxide镀锌干壁自钻自攻钉 Pan Farming screws Pozi Self-drilling Screws发黑岗山头十字槽自钻自攻钉Pan Head Self-drilling screws Nickel Pleated and Zinc Plated盘头自钻自攻钉 镀锌镀镍Hex washer with Neo Washer Yellow Zinc Plated六角带垫套尼龙垫机螺纹自钻自攻钉 黄锌Hex Washer Self-Drilling Screws六角带垫自钻自攻钉六角套筒Wafer Head Self-drilling Screws威华头自钻钉、根切沉头自钻钉Hex Waher with ZPDM Bonded Washer Self-drilling Tapping Screws六角带垫套复合垫自钻自攻钉Hex Waher with ZPDM Bonded Washer Self-drilling Screws六角带垫套复合垫自攻钉Self-tapping screws自攻螺丝Self-tapping Screws Black Nickel Plated镀黑镍自攻钉Double Thread Self-tapping Screws双线自攻钉Combination Head Self-tapping Screws复合槽十字槽自攻钉Self-tapping Screws Nickel Plated镀镍自攻钉Slots & Phil & Square Pan Self-tapping Screws十字槽一字槽方槽沉头自攻钉Pan Head phil Self-tapping Screws盘头十字槽自攻钉Screws with lacquer Printed头部喷漆自攻钉Truss Head Phil Self-tapping Screws Chorme Plated扁头十字槽自攻钉 镀铬Chipboard Screws纤维板螺钉Chipboard Screws Plat Head Yellow Plated沉头米字槽纤维板螺钉 黄锌Chipboard Screws Plat Head Bronze Plated沉头米字槽纤维板螺钉 镀古铜Chipboard Screws Pan Head White Plated盘头米字槽纤维板螺钉 镀白锌Double Head Chipboard screws双沉头（双锥）纤维板螺钉Chipboard screws with Ribbs (AUS Standard) 沉头带筋纤维板螺钉 （澳标）Drywall screws干壁螺钉Drywall Screws Grey Phosphated灰磷化干壁钉Drywall Screws Black Phosphated黑磷化干壁钉Drywall Screws Coarse Thread Black Phosphate黑磷化粗牙干壁钉Drywall screws Coarse Thread Yellow Plated粗牙干壁钉 镀黄锌Machine screws机螺钉Pan Head phil Machine Screws盘头十字槽机螺钉Flat Head Machine Screws沉头机螺钉Hex with Washer Anti-draw Machine Screws六角带垫带止退机螺钉Square Hex Slots Machine Screws凹穴六角一字槽机螺钉combination Pan Head Machine Screws盘头复合槽机钉Un-standard screws其它及非标螺钉Double Head Screws Eye Lag Screws Hook Screws双头螺钉 羊眼 灯钩 绞丝钉Hexagon Head Wood