文档04 elk环境搭建

买源码就到 非凡资源店淘宝：更多优质源码，请访问：www.qiquC加微信获取最新源码信息：kofcheng201目录一、下载地址1二、Elasticsearch下载安装运行31.Windows上安装31)先下载32)解压后33)运行4三、Kibana51.Windows上安装5四、logstash61)logstash.conf62)制作启动脚本103)Create index pattern114)查看日志13声明：安装出现问题的话，尽量自己百度查资料，这属于环境和运维问题，小威老师也不懂的，请谅解，以下是小威老师自己windows电脑环境安装配置的步骤，可以作为参考一、 下载地址https:/www.elastic.co/cn/downloads二、 Elasticsearch下载安装运行1. Windows上安装1) 先下载2) 解压后修改配置configelasticsearch.yml ，参考下图不存在data和logs目录的话，先创建data和logs目录将path.data和path.log改为你电脑上的路径3) 运行双击等控制台有输出后访问http:/localhost:9200/出来这个结果说明安装成功三、 Kibana1. Windows上安装解压后，双击访问http:/localhost:5601出来界面即为成功四、 logstash下载1) logstash.conf解压后，在bin目录下创建logstash.conf文件，并贴入下面的input、output等，并将红色的改为你自己的路径inputfile path = E:/idea-space/cloud-service/logs/user-center.logtype = user-centerfile path = E:/idea-space/cloud-service/logs/manage-backend.logtype = manage-backendfile path = E:/idea-space/cloud-service/logs/file-center.logtype = file-centerfile path = E:/idea-space/cloud-service/logs/gateway-zuul.logtype = gateway-zuulfile path = E:/idea-space/cloud-service/logs/log-center.logtype = log-centerfile path = E:/idea-space/cloud-service/logs/oauth-center.logtype = oauth-centerfile path = E:/idea-space/cloud-service/logs/notification-center.logtype = notification-centeroutputif type = user-center elasticsearch hosts = localhostindex = user-centerif type = manage-backend elasticsearch hosts = localhostindex = manage-backendif type = file-center elasticsearch hosts = localhostindex = file-centerif type = gateway-zuul elasticsearch hosts = localhostindex = gateway-zuulif type = log-center elasticsearch hosts = localhostindex = log-centerif type = oauth-center elasticsearch hosts = localhostindex = oauth-centerif type = notification-center elasticsearch hosts = localhostindex = notification-center2) 制作启动脚本在bin目录下创建run.bat文件里面贴入logstash.bat -f logstash.conf启动时，双加run.bat即可报错的话，看看你的环境变量CLASSPATH，是不是有什么c:Program Files (x86)QuickTimeQTSystemQTJava.zip删除这个，然后重启电脑，再试试3) Create index pattern访问http:/localhost:5601选择左侧菜单Management右侧显示我们的各个服务名，注意，这里要求logstash.conf里面配置的日志文件路径正确，并且存在日志文件，否则不会出现上图右侧的列表。输入名字，最好跟我们的服务名一致，这样一一对应，大家更好查看是哪个服务的日志，这里以user-center为例，然后点击Next