关 键 词：

三维SW建模 花生 红衣 脱皮 设计 三维 SW 建模 CAD 图纸 PDF

资源描述：

喜欢这套资料就充值下载吧。。。资源目录里展示的都可在线预览哦。。。下载后都有，，请放心下载，，文件全都包含在内，，【有疑问咨询QQ:1064457796 或 1304139763】

内容简介：

花生红衣脱皮机的设计第一作者：王九龙 第二作者：范修文（塔里木大学机电学院，新疆 阿拉尔 843300）摘 要: 花生仁是由红色外衣和籽仁组成。红衣主要是纤维组织和止血素, 而花生中的油脂、蛋白质等营养素都集中在籽仁中。无论是从花生中提取蛋白粉, 还是提高花生榨制出浓香型花生油的档次, 都需将花生果经剥壳后再去掉花生果仁上的红皮(俗称红衣), 这是制作上述食品及原料加工过程中不可缺少的关键工序之一1。为此，我们需要设计与试制一种花生脱红衣机来除去花生红衣为后续的工作做准备。本文通过利用搓擦原理将花生仁上的红衣去除的方法，阐述了通过搓擦的原理可以将花生仁上的红衣有效的脱离下来，并且花生仁的破碎率小2。通过实验论证了可以利用两胶带之间的搓擦使花生仁上的红衣有效的脱离下来，可广泛的应用于花生的初加工。关键词:花生红衣;活动与固定摩擦胶带;搓擦原理;振动筛A Design on Peanut Red Skin HullerFirst author: Wang Jiulong; Second author: Fan Xiuwen(Electromechanical College of Tarim University, Alar, Xinjiang 843300)Abstract: A peanut kernel is composed by a red skin and a kernel. The skin is mainly made up of fibrous tissues and stypticins, while the kernel mainly contains nutrients like fat and protein. No matter whether the peanuts are used to extract albumen powder or used to enhance the quality of the extracted strong flavor peanut oil, the red one (generally called red skin) covering the kernel should be peeled after the peanut is shelled, which is one of the essential key procedures in making the products and material processing. Therefore, we need to design and trial-produce a peanut red skin huller, in preparation for the subsequent procedures. So, throughout the paper, the designers stated that rubbing principle could be applied in taking off the red skin and expounded how it worked effectively with low broken rate. By experiments, it has been expounded and proved that the red skin can be dropped successfully with the rubbing between the rubber belts, which can be widely applied in the primary processing of peanuts.Keywords: pe