基于SolidWorks的电除尘器振打装置设计【说明书+CAD】
收藏
资源目录
压缩包内文档预览：
编号：122369789
类型：共享资源
大小：1.61MB
格式：ZIP
上传时间：2021-04-19
上传人：221589****qq.com
认证信息
个人认证
李**（实名认证）
湖南
IP属地：湖南
40
积分
- 关 键 词：
-
基于
SolidWorks
电除尘器
装置
设计
说明书
CAD
- 资源描述：
-
基于SolidWorks的电除尘器振打装置设计【说明书+CAD】,基于,SolidWorks,电除尘器,装置,设计,说明书,CAD
- 内容简介：
-
To ensure stable operation of electrostatic precipitator efficiency measuresESP is a highly efficient dust collector, has been more and more used by coal-fired power plants. Electrostatic precipitator in order to maintain long-term, high-performance and stable operation, it should be affecting the efficiency of electrostatic precipitator factors analysis, and to the strengthening of electrostatic precipitator operation, maintenance and overhaul management.1 Affect the efficiency of electrostatic precipitator dust factor1.1 High-low-voltage power supply control device design and operation of the poorReasonable corona ESP power is to ensure safe, stable operation of one of the important factors. ESP 380V DC high voltage from high-voltage alternating current flowing through thyristor rectifier equipment supply, electric dust collector of high-voltage power supply impedance is a load change. Impedance when the electric field increased ER-hour requirements of equipment to automatically step-up; lower impedance when the electric field and current become larger, the requirements of equipment to automatically step-down in order to maintain the current settings. Internal transformer rectifier voltage and current sampling resistor, the introduction of negative feedback signals, processed by the microcomputer intelligent control thyristor phase-shift of the conduction angle, the output voltage to change the load to the purpose of output, so that the most effective electric field of corona power. However, some power and control equipment, factory production control of the controller of the device characteristics and control methods are not perfect protection, etc., coupled with the power plant operation and maintenance personnel of equipment There is a certain understanding of the principles of the blind spot, resulting in power supply poor operation of control devices.1.2 vibration cleaning device operating mode unreasonableAt present, thermal power plants in addition to the use of electricity, and all is vibration cleaning methods. In the vibration intensity and uniformity requirements are met, the vibration system (cycle time, the way) is reasonable for the efficiency of electrostatic precipitator dust impact. Vibration cycle, the impact on the collection efficiency is to be able to make when cleaning off the dust from falling into the ash bucket directly block. Vibration cycle is too long, fouling plate thickness, will reduce the dust in the very board charged the conductive properties, reducing collection efficiency; vibration cycle is too short, dust will be dispersed into falling, have given rise to the second dust , that is deposited on the electrostatic precipitator dust collecting on the pole again with a dust collector currents, in particular the electric field at the end of the second polar dust would greatly reduce the efficiency of electrostatic precipitator.Dust caused by the second there are many factors, such as high resistivity dust, resulting in anti-corona electric field collecting the uneven distribution of the flue gas flow rate or flow rate caused by high turbulence and swirl. Therefore, the requirements of the electric field of flue gas flow rate of not more than 3m / s, the general operation of the electric field in the flue gas flow rate 1.5m / s or so, and the possible distribution of flue gas flow, and the vibration frequency of cleaning off is caused by dust Secondary dust factor. Follow certain procedures, using appropriate test methods, establish the right vibration system, at the same time strengthen the gray ash bucket equipment maintenance to prevent gray ash blocked out the Big Dipper, can prevent the occurrence of secondary dust.1.3 boiler operating parameters deviate from normalUnder the normal load in the boiler flue gas flow, exhaust gas temperature, flue gas dust concentration and other parameters with the design parameters of electrostatic precipitator or less the same as all the normal operation of electrostatic precipitator. If the boiler flue gas flow increases, smoke temperature, flue gas dust concentration increased, the electrostatic precipitator operating conditions will deteriorate, so that lower collection efficiency. When the boiler low-load running time, in order to stabilize combustion, must be input for combustion of heavy oil or diesel, resulting in flue gas temperature and increase in the viscous material. These viscous materials hypertrophy caused by cathode-ray anode plate deposition, resulting in decreased efficiency of the electric field of the dust. If vapor leaks in the boiler, flue gas will increase the humidity, although in a very short time because of smoke and quenched and tempered by lower resistance than the ash, dust removal efficiency will be increased, but a little longer, will seriously fouling ESP, In particular, when the disclosure of large, plate or scale, will reduce the life of precipitator.1.4 changes in coalIf coal burning boiler changes in the design of its calorific value than coal with low ash coal than the design of high, it will increase its coal, flour mills, dust, ash equipment wear and shorten the maintenance cycle of the equipment. The use of low calorific value coal, the actual coal-fired boilers will increase so that the volume of flue gas containing ash increased. This will make ESP more than dealing with the design of flue gas dust concentration values, collection efficiency will be seriously affected. In order to eliminate coal from the impact of changes in collection efficiency of electrostatic precipitator, dust removal equipment in the system under normal circumstances, each electrostatic precipitator should be carried out at least one of the characteristics of typical coal tests to determine the coal, electricity , vibration efficiency electrostatic precipitator for the combined effect of the ESP to find the best operating mode.2 strengthen the electrostatic precipitator maintenance and repair work(1) State Power Environmental Protection produced by DJ series of computer-controlled high-low-voltage power supply devices, and its use of advanced high-pressure control part of the 8098 single-chip and peripheral chips, control, protection functions, simple structure, easy-to-use features, and for thermal power plant boiler combustion emission of dust (fly ash) than the changes in resistance provides a wide range of power supply to run a variety of different ways to meet the requirements of working conditions. This power supply equipment for the original transformation, the central plane can be achieved with long-range and turbidity dust detector constitute the feedback signal of the closed-loop control electrostatic precipitator, to the effect of energy-efficient operation. Their protection and alarm functions involved in the importation of over-current, output open-circuit, output short circuit, undervoltage protection, partial excitation, SCR risk of open and critical temperature, the thermal power plant is almost covered by the operation of electrostatic precipitator for all fault types.(2) efforts to improve the status of the operation of electrostatic precipitator, strictly enforce the electrostatic precipitator operation and maintenance guidelines， the existence of the operation of the equipment failures and shortcomings should be in time, establish a comprehensive, reasonable maintenance and project cycle.(3) maintenance area. Overhaul at the electrostatic precipitator in overcast, anode spacing adjustments, and record the measurement results before and after adjustment. To overcast, anode device vibration equipment (mainly electrical vibration, reducing the browser machine, shaft, bearings, torsion arm hammer, insulation connecting rod, etc.) to inspect the wear and handling; of ash systems, insulation, heating systems, Doo-gray level meter, devices such as locking gas inspection and debugging.(4) electrical connection. Enforcing overhaul of preventive tests electrical equipment order in the electrostatic precipitator transformer rectifier sections of high pressure and low pressure reactor, insulating support and connected components, high voltage direct current cables and other equipment of the pilot project and the express provision of the cycle, to trigger power supply device performance testing, on a variety of protection throughout the trial, the high-low voltage electrical circuit and switch instruments seized the school, and hanging rectifier to change the core inspection.(5) ESP overall debugging after overhaul. After the overhaul of the rectifier transformers, electric field to no-load step-up test, and run-time conditions to the rated characteristics of the U-I testing; of imports and exports of flue gas temperature and pressure testing instructions; of Turbidimeter, lighting equipment for testing. If the conditional words, it should also be on the ESP collection efficiency before and after overhaul comparison test, to test the effectiveness of repair work.保证电除尘器高效稳定运行的措施电除尘器是一种高效的除尘器，已被越来越多的火力发电厂所采用。为了保持电除尘器长期、高效、稳定地运行，应该对影响电除尘器效率的因素进行分析，并加强对电除尘器运行、维护和检修的管理。1影响电除尘器除尘效率的因素1.1高低压供电控制装置设计运行不佳合理的电除尘器电晕功率是保证电除尘器安全、稳定运行的重要因素之一。电除尘器直流高压由380V交流电流经可控硅高压整流设备供给，除尘器电场阻抗对高压供电装置来说是一个变化的负载。当电场阻抗升高、电流变小时，要求设备能自动升压；而当电场阻抗降低、电流变大时，要求设备能自动降压以保持设定的电流。整流变压器内部的电压、电流取样电阻，引进负反馈信号，经微机智能处理后移相控制可控硅的导通角，改变负载输出电压，达到稳定输出的目的，使电场获得最有效的电晕功率。然而有些电源及控制设备制造厂生产的控制器对设备控制特性和控制方式、保护功能等还不完善，再加上电厂运行和检修人员对设备原理的理解存在一定的盲区，从而造成供电控制装置运行不佳。1.2振打清灰装置的运行方式不合理目前，火电厂使用的电除器，无一不是采用振打方式清灰。在振打力度和均匀性都满足要求的情况下，振打制度(周期、时间、方式)是否合理对电除尘器除尘效率影响极大。振打周期对除尘效率的影响在于清灰时能否使脱落的尘块直接落入灰斗。振打周期过长、极板积灰过厚，将降低带电粉尘在极板上的导电性能，降低除尘效率；振打周期过短，粉尘会分散成碎粉落下，引起较大的二次扬尘，即沉积在电除尘器收尘极上的粉尘再次被气流带出除尘器，尤其是末极电场的二次扬尘会大大降低电除尘器的效率。导致二次扬尘的因素有许多，如粉尘的比电阻过高，产生反电晕收尘电场的烟气流速分布不均或流速过高而产生的紊流和涡流。因此，要求电场的烟气流速不超过3m/s，一般电场中运行的烟气流速都在1.5m/s左右，且尽可能使烟气流分布均匀，而振打清灰过频，是造成除尘器二次扬尘最主要的因素。遵循一定的程序，采用恰当的试验方法，建立正确的振打制度，同时加强对灰斗排灰设备的维护，防止灰斗出灰口堵塞，都能防止二次扬尘的发生。1.3锅炉的运行参数偏离正常值在正常负荷下锅炉的烟气流量、排烟温度、烟气含尘浓度等参数值与电除尘器设计的参数相差不大，电除尘器都能正常运行。若锅炉烟气流量增大、排烟温度升高、烟气含尘浓度增加，电除尘器的运行工况就会恶化，使除尘效率降低。当锅炉长时间低负荷运行时，为稳定燃烧，必须投入重油或柴油助燃，造成烟气温度和烟气中的粘稠物增加。这些粘
- 温馨提示:
1: 本站所有资源如无特殊说明，都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等，如果需要附件，请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸，网页内容里面会有图纸预览，若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间，仅对用户上传内容的表现方式做保护处理，对用户上传分享的文档内容本身不做任何修改或编辑，并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容，请与我们联系，我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
人人文库网所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。
川公网安备: 51019002004831号