[海川hcbbs]PDMS_COMMANDS

1、PDMS Commands _PIPING COMMANDS1. ADD ALL PIP2. REM ALL PIP3. MOVE U THROU IDP4. MOVE E THROU IDP5. MOVE W THROU IDP6. MOVE N THROU IDP7. MOVE S THROU IDP8. Q DTXR (To See Name Of Component)9. Q STEXT10. STEXT NOTE (Naming For Attachment)11. Q ATT (To see the attributes)12. REPR INSU ON/OFF UPDATE13.

2、 Q ISPEC (To see the insulation)14. ISPEC NULREF (To Remove the Insulation)15. CONN NEXT (Connection to next element)16. FCONN (For force connection)17. DIST 50018. AXES AT PH (To see Axes of Pipe Head)19. AXES AT PT (To see Axes of Pipe Tail)20. AXES OFF21. BY U 50022. BY D 50023. BY E 50024. BY W

3、50025. BY S 50026. BY N 50027. Q NAME28. ROTATE BY 45 (Rotated command)29. ROT BY 90 ABOUT Z THRO ID (Rotated)30. Q PARA (To check nozzle size)31. Q CATREF (To See nozzle Rating)32. Q POS IN WORLD33. CH CE (check current element)34. Q SPREF (check piping Spec)35. Q ORI (To see the orientation)36. DI

4、R D (Direction Down) U E W N S (For elbow, tee, valve)37. Q P1/P2/P3 (To see pipe Bore Direction Connection type and Position)38. Q HBORE39. Q TBORE40. Q LBORE41. NEW BRA COPY PREV BY E/W/S/N/U/D 10042. Q U (To see the elevation)43. Q ANGLE (For change the angle)44. THRO NEXT (To connect element to

5、next component)45. Q LTLE (To cheek pipe length)46. Q MEM47. Q RTEX OF DETREF (To see element type and detail)48. CONN IDP TO IDP Q CE49. Q PL (For Direction and position)50. BRA CONN PH TO FIST MEM51. BRA CONN PT TO NOZZ ID52. BRA CONN PT TO LAST53. RAD 500 (Control Valve Radius)54. HEI 500 (Contro

6、l Valve Height)55. BACK (Backward)56. FORW (Forward)57. For Drain pipea. ADD ATT (For isometric note)b. Q ATTc. TCONN OPENd. Q STEXTe. STEXT DRAIN POINT58. For Slope Line /Rotated Elbowa. FORWARDS (Select in piping components)b. DIR TOW NEXTc. BACKWARDS (Select in piping components)d. DIR TOW NEXT59

7、. MTOC DOTD (Do not want in bill of material) You can see the Doted DOTD60. MTOC ON (Want in bill of material)61. MTOC OFF (Dont Want in bill of material)62. Q PA BOP/TOP (To see the pipe BOP/TOP)63. Q LSTUBE (To Change the spec Brake)64. Q PSPEC (To see the pipe spec)65. CONN PH TO P3 OF ID ( AND S

8、ELECT THE PIPE P3)66. CONN PT TO LAS MEMSTRUCTURE COMMANDS1. AXES AT POSE/S (end or start)2. Q POSE WRT/*3. EXTE END BY D 500 WRT/*4. EXTE START BY U 500 WRT/*5. EXTE END/START THRO ID6. EXTE END/START THRO IDPL (PL-Pline)7. Q CUTL (To see length of section)8. Q POS PPLINE BOS IN/* (BOS TOS NA)9. AD

9、D ALL STR10. REM ALL STR11. Q ATT12. BY U/D/E/W/N/S 50013. Q DRNS DRNE14. DRNSTART S 45 E (Direction and angle)15. DRNEND S 45 W (Direction and angle)16. MARK WITH (NAME OF CATREF) ALL SCTN FOR CEEQUIPMENT COMMANDS1. ADD ALL EQUI2. REM ALL EQUI3. MOVE U THROU IDP4. MOVE E THROU IDP5. MOVE W THROU ID

10、P6. MOVE N THROU IDP7. MOVE S THROU IDP8. REPR HOLES ON/OFF UPDATE9. REPR OBST ON/OFF UPDATE10. To Copy New Equipment a. VAR1 NAME b. NEW EQU COPY $V1 (To Include Equipment in another zone)11. BY U/D/E/W/N/S 50012. NEW BOX COPY PRE13. NEW BOX XLEN 400 YLEN 250 ZLN 15014. NEW CYL COPY PRE15. NEW PYRE

11、 COPY PRE16. NEW NOZZ COPY PRE17. NEW BOX COPY PRE ROT BY 90 ABOUT Z THRO IDPDistance Measuring commandCONST DIST IDP TO IDPCONST DIST P0 TO P0 OF IDCONST DIST PA TO PA OF NEXOTHERS COMMANDS1. For copy equip/sub equipment from one project to another project.a. FILE /FILE NAME.TXTb. OUTPUT CEc. TERM2

12、. For pest equipment / sub equipment from one project to another project.a. $M FILE NAME.TXT3. For Undo Commanda. MDB NOUPDATEb. EXIT4. Mdb Updatea. MDB UPDATEb. USER PROMQAMQA/MQAc. /SUFNd. EXIT5. UNCLAIM CE6. UNCLAIM ALL7. ALPHA REQ CLEAR (To clear the command screen)8. CREATE NEW ZONE/SITE/EQUI9.

13、 ADD ALL WITHIN VOL CE 10010. Q ORI (To see the orientation)11. ALPHA LOG /C:/ANANT.TXT (To make command line file)ALFA LOG END12. SAVEWORK13. Q US (User name)14. Q MDB (Multiple data base)15. Q REF16. RECREATE DISPLAY /ABC.TXT (For save Display)17. $M ABC.TXT (For restore Display)18. Q UNITS19. Q D

14、ISPLAY20. Q BANNER (To Check the version number)21. Q BANNER FULL22. Q TEAM (PDMS user name)23. Q USER (Logging name)24. Q DBNAME (To check DB name)25. Q DBTYPE26. Q DBFNUMBER27. Q DBFILE28. Q LASTMOD29. Q SESSMOD30. Q SESSMODI31. Q USERMODI32. Q LASTMODI HIER33. Q DRAW34. Q DRAW COUNT35. Q DRAW FUL

15、L36. STATUS37. SYSTAT (Gives you information about the current active Status of the project)38. recre disp /gggg over (U can save as a display or u can do like this)$m gggg39. FILE /C:/AAA OVER OUTPUT NEW CEV TERM ENTER $M /C:/AAA40. ADD ALL SITES WITH MATCHW(NAME,*/H)QUERY COMMANDSQ CECurrent eleme

16、ntQ MEMCE MembersQ NAMECE NameQ REFCE Reference nameQ ATTCE AttributesQ LISTCE available element typesQ PARACE parametersQ ORICE orientationQ POSPosition with respect to ownerQ POS WRT /*Position with respect to worldQ N/S/E/W/U/DPosition N/S/E/W/U/DQ POSS POSEPosition start/endQ CUTLENCut lengthQ D

17、ERLENDerived lengthQ PSIZEPane box sizeQ BANGBeta angleQ GTYPEGeometry typeQ SPRESpecification referenceQ HEIPlate heightQ MATREFMaterial referenceQ MIDPOIMidpointQ JUSJustification lineQ MEMLMember lineQ DRNS/EDirection start/endQ LEVELObstruction levelQ BANCurrent versionQ USERCurrent userQ LASTMO

18、DLast modifiedQ USERMODUser modifiedQ DBNAMEDatabase nameQ PA/L DOOuter dia of the arrive/leave of pipePut some items in the graphic view and use the following commandshow !gphmotionPDMS Syntax ExamplesPositionMoveDistanceMoves the elements origin by a given distance in a given direction.Ex. MOVE N

19、DIST 10MOVE S WRT /* DIST 5MOVE E IN SITE DIST 5PositionMoveThroughMoves the origin of the element in a given direction through a Reference Plane perpendicular to the line of travel that is passing through a picked element, p-point, or coordinate.Ex. MOVE N THRO IDMOVE N THRO IDP MOVE N THRO N46Posi

20、tionMoveClearanceMoves the elements origin, p-point, or obstruction in a given direction with a clearance from another items origin, p-point, or obstruction.Ex. MOVE E DIST 10 FROM /P-101MOVE E CLEARANCE 10 FROM /P-101The options INFRONT, BEHIND, ONTO, and UNDER refer to a picked or named items phys

21、ical obstruction, while the TO and FROM options refer to the items origin. INFRONT and TO refer to the near side while BEHIND and FROM refer to the far side of an item.PositionPlane MoveThroughMoves the origin of the element in a given direction through a Reference Plane specified by the user that i

22、s passing through apicked element, p-point, or coordinate.Ex. MOVE ALONG E PLANE N45W THRO ID AT E3 N30 U10 - Position the current element at a specific coordinate (must specify all three coordinates) BY E66 - Move the current element a relative distance in a given direction TO U126 - Move a piping

23、component to one specified zone coordinate along constrained centerline Q ATT - Query all attributes of current element Q NAME - Query name (or any specific attribute may be used) of the current element Q REFNO - Query the reference number of the current element Q POS - Query position wrt owner of t

24、he current element Q POS WRT ZONE - Query position wrt zone of current element Q CE - Query the name attribute (or reference name) of current element Q MEM - Query members of current element Q OWN - Query the name of the owner of the current element NEXT - Go to next element in list PRE - Go to prev

25、ious element in list SAME - Go to the previous current element $Q - Lists all valid commands MOVE $Q - Lists all options for the MOVE command NAME /ANYNAME - Set the name attribute of the current element DESC ANY TEXT STRING - Set the Description attribute of the current element to a text string. $S

26、 QA=Q ATT - Create synonym to query attributes Q POS PPLINE TOS START WRT WORL - Query TOS of current element (SCTN) Q EVAR PDMSUSER - Query the operating system location of user file directory (%PDMSUSER%) NEW STRU - Create new structure element (Note: CE must be a owner level (ZONE) or below NEW S

27、UBS /MAIN-DECK - Create new substructure element and set the name attribute POS E20 N10 U5 - Position CE at specified owner coordinates POS E20 N10 U5 WRT /* - Position CE at specified world coordinates CONN IDP TO IDP - Connect a picked Ppoint on the current primitive to a picked Ppoint of another.

28、 CONN P1 TO IDP - Connect P1 of the current primitive to a picked Ppoint of another primitive.PDMS PSEUDO ATTRIBUTES In order to get specific information directly from the database, a number of keyword or pseudoattributes have been introduced. Pseudo attributes are not attributes as such, but they h

29、avethe ability to extract data when queried. For Example ELBO 1 - Go to elbo 1 of the branch Q PARAM - Query the parameters of the catref of the spref Q DTXR - Query the rtext of the detref of the spref_ can also use dtxs or dtxt Q MTXX - Query the xtext of the matref of the spref _ can also use mtx

30、y or mtxz Q PSATTS - Query the list of pseudo attributes available for the CE.A few useful pseudo attributes appear below:General Queries Q LIST - Query what you can create below the current element Q OLIST -Query the type of elements which can own CE Q ORDER -Query the list position Q PROP DESC - Q

31、uery the data element with the dkey equal to DESC in the components dataset (Steelwork and Piping elements) Q PRLS - Query the list of properties in the components dataset Q PURP XXX - Query the purpose attribute of the property XXXPiping Attributes Q CHOICE - Query the answers of the selectors of t

32、he spref Q CHOICE STYP - Query the styp used to select the component Q PL BOP - Query the bottom of pipe elevation of the leave point Q PA INSU - Query the insulation thickness at the arrive point Q PGRAD 1 - Query the slope at ppoint 1 Q ITLE - Query the length of implied tube (must navigate first

33、by using IL TUBE at a component) Q LBOR - Query the leave bore Q ABOR - Query the arrive bore Q APOS - Query the arrive position Q LPOS - Query the leave positionAt Branch Level Q TULEN - Query the length of tube in a branch Q CLLEN - Query the centerline length through all componentsSteelwork Q ODE

34、SP - Query the design params of the joint owner Q ADESP - Query the design params of the joint attached beam Q DRPS - Query the derived position of the beam start Q NWEI - Query the net weight (considering joint cut outs) Q GWEI - Query the gross weight (beam before cutting) Q NCOF - Query the net c

35、entre of gravity for the beam Q NSRF - Query the net surface area Q MIDP - Query the mid point Q POS PPLINE TOS START WRT /* - Query TOS of current element (SCTN) Q PPLINE TOS DIR - Query the direction of the TOS pline on a SCTNPDMSMODEL Check ListThe purpose of this checklist is to provide general

36、guidelines to check a module. Some of the checks are on-going, some of should be performed once a week or when the module is finished and PI is ready to be started.1. Check section specifications and ploo heights- Use “Utilities Lists”- function to select elements2. Check positions- Use “Utilities R

37、eports”- function to select elements- Position of SITE/ZONE/STRU has to be 0,0,0 WRT WORLD3. Add all surrounding structures by discipline- Add all volumes within 1000 mm box for visual check4. Delete empty elements- Use “Utilities Lists”- function to select elements STRU/FRMW/SBFR/PANE/PLOO without

38、members5. Update connections- Use “Position Align Secondary Nodes”- function in Site- level6. Set material references- Use “Utilities Lists”- function to select elements FRMW/SCTN/PANE or“Modify Material”- function7. Check sections without SPREF or length less than 100 mm- Use “Utilities Lists”- fun

39、ction to select elements8. Check section end connections- Use “Query End Connections”- function9. Make section ends perpendicular in bracing (KBR)- Use “Utilities Lists”- function to select elements10. Tidy Model- Use “Delete Tidy Joints” and “Delete Tidy Nodes”- functionsPDMS COMMANDS: MOSTLY STRUC

40、TRUALNEW STRU COPY $V1COPIES STRU FROM 1 SITE TO ANOTHER Q USERMGIVES CREATORS NAMEQ PPLIN TOS START WRT/DATUMGIVES TOP OF STEEL OF UB/UCQ IDP WRT /DATUMGIVES THE COORD OF A POINTQ ADEG (DRAFT)GIVES THE C/VIEW ANGLE (ie 90 DEG)Q ANGLE (HVAC)GIVES THE CE ANGLEQ ATEX (DRAFT)GIVES THE SLAB TEXT ATTRIBU

41、TESQ ATTGIVES THE CE ATTRIBUTESQ BANGGIVES THE CE BETA ANGLEQ BORE (PIPING)GIVES THE PIPE INSIDE DIA.Q BSRF (DRAFT)GIVES THE ATTACHED DRG/SHT (DRWG LEVL)Q BTEX (DRAFT)GIVES THE TEXT/GLAB ATTRIBUTESQ CHEI (DRAFT)GIVES THE CHARACTER HEIGHTQ CLL (PIPING)GIVES THE PIPE BRANCH LENGTHQ COL 4 (ETC)GIVES TH

42、E ATTRIBUTED COLOUR (YELLOW)Q COL ACTGIVES THE CURRENT ACTIVE COLOURQ COL AIDSGIVES THE CURRENT AID LINE COLOURQ COL CEGIVES THE CURRENT ATTRIBUTED COLOURQ COL VISGIVES THE CURRENT VISIBLE COLOURQ CREFGIVES THE CONNECTION REFERENCEQ CUTLGIVES THE CE CUT LENGTHQ DDNAME (DRAFT)GIVES THE DIMENSION OWNE

43、RS NAMEQ DER LENGIVES THE CE EXACT LENGTHQ DESCGIVES THE CE DESCRIPTIONQ DESPGIVES THE CE PARAMETERSQ DIR (DRAFT)GIVES THE C/VIEW ANGLE (ie N)Q DISPLAYGIVES THE TOLERANCE & REPRES LEVELSQ DMTXT (DRAFT)GIVES THE DIM TEXT ATTRIBUTESQ DNSTGIVES THE CE DENSITYQ DPOS (DRAFT)GIVES THE LDIM POSITION ON SHE

44、ETQ DRNEGIVES THE END CUT-PLANE DIRECTIONQ DRNSGIVES THE START CUT-PLANE DIRECTIONQ DTER (DRAFT)GIVES THE LAYER/LDIM TERMTR DEFAULTQ EGIVES THE CE EAST CO-ORDINATEQ ELEMGIVES THE CE ELEMENT NAMEQ FPT (DRAFT)GIVES THE STRA FROM POINT CO-ORDSQ FRADGIVES THE PLOO/PAVE RADIU ie 100mmGIVES THE NEXTR/VERT

45、 RADIUS ie 100mmQ FUNCGIVES THE CE FUNCTIONQ GCOFGIVES THE CE GROSS C OF GQ GTYPGIVES THE GENERIC TYPE i.e. OD, HP, TGQ GWEIGIVES THE CE GROSS WEIGHTQ H (PIPE SUPPT)GIVES THE CE HANDER HEAD CO-ORDSQ HEIGIVES THE CE (PLOO LVL) PLT THKQ HPOS (PIPING)GIVES THE CE PIPE HEAD CO-ORDINATESQ HT (PIPE SUPT)G

46、IVES THE CE HANDER TAIL CO-ORDSQ IDP WRT /*GIVES THE CE P POINT CO-ORDINATESQ IDPL GIVES THE PLINE NAME USING CURSORQ INREFGIVES THE CE IN REFERENCEQ ISPEC (PIPING)GIVES THE CE (PIPE) INSULATIONQ ITLEGIVES LENGTH OF IMPLIED TUBEQ JLINGIVES THE CE JOINT LINEQ JUSLGIVES THE CE JUSTIFICATION LINEQ LAST

47、MODGIVES THE DAT STRU WAS LAST MODIFIEDQ LEN (DRAFT)GIVES THE STRA LENGTHQ LEVGIVES THE CE LEVEL (OBSTRUCTION ETC)Q LHEI (DRAFT)GIVES THE TEST LETTER HEIGHTQ LISTGIVES THE CE FITTINGS (NEG EXTR. ETC)Q LOCKGIVES THE LOCK STATUSQ LSHAPE (DRAFT)GIVES THE LABEL LEADER LINE STATUSQ MATREFGIVES THE CE MAT

48、ERIAL REFQ MCOUNTGIVES THE NOS OF SUB MEMBERS IN CEQ MCOUNT SCTNGIVES THE NOS OF SCTN MEMBERS IN CEQ MDBGIVES THE PROJECT DATABASEQ MEMGIVES THE CE MEMBERSQ MEMLGIVES THE CE MEMBER LINEQ MIDPGIVES THE CE MIDPOINT CO-ORDINATESQ MPT (DRAFT)GIVES THE STRA MID POINT CO-ORDSQ MTLEGIVES LENGTH OF MATERIAL

49、 TUBEQ MTLLGIVES CL LENGTH OF MATERIAL TUBEQ MTOGIVES THE CE MTO STATUSQ NAMGIVES THE CE NAMEQ NCOFGIVES THE CE NET C OF GQ NSRFGIVES THE CE NET SURFACEQ NVOLGIVES THE CE NET VOLUMEQ NWEIGIVES THE CE NET WEIGHTQ OBSGIVES THE CE OBSTRUCTION LEVELQ ORIGIVES THE CE ORIENTATION (SLOPE)Q OSRFGIVES THE SH

50、EET OVERLAY (VIEW ONLY)Q OWNGIVES THE CE OWNERQ PA (PIPING)GIVES TE C ARRIVE CO-ORDINATESQ PARAGIVES THE CE PARAMETERS ie SERIAL SIZESQ PH (PIPING)GIVES THE CE PIPE HEAD ATTRIBUTESQ PH BORE (PIPING)GIVES THE CE (PIPE HEAD) BOREQ PH OD (PIPING)GIVES THE CE (PIPE HEAD) DIAMETERQ PI WRT/* (PIPING)GIVES

51、 THE CE (PIPE SUPPORT) LOCATIONQ PKEY (DRAFT)GIVES THE DIM PLINE STATUS (ie TCTF)Q PL WRT/* (PIPING)GIVES THE CE HVAC LEAVE CO-ORDINATESQ PLNAGIVES THE PLINE NAMESQ PLTXT (DRAFT)GIVES THE PROJ TEST ATTRIBUTESQ POSGIVES THE CE CO-ORDINATES (START)Q POS FITTGIVES THE C/FITT CO-ORDINATES (START)Q POS I

52、DPL GIVES THE PLINE CO-ORD AT CE STARTQ POS IN $V1GIVES THE CE DISTANCE TO VAR. $V1Q POS PIN1 WRT/*GIVES THE CE CO-ORDINATES OF PIN 1Q POS PLRF (DRAFT)GIVES TE CURRENT VSEC CO-ORDSQ POS POPLI NA PROP 0.5GIVES THE CENTRE CO-ORDINATE POSITIONS OF THE PLINE (PPLI) AT (0.5X DER LEN) ON THE N/AQ POS PPL1

53、 BOS WRT/*GIVES THE BOS PLINE CO-ORDINATESQ POS WRT TO IDGIVES THE DIST FROM CE TO START OF IDENTIFIED MEMBERQ POS1 WRT/*GIVES THE CE CO-ORDINATES OF PIN 1Q POSEGIVES THE CE END CO-ORDINATESQ POSPPLI NA PROP 0.5GIVES THE CENTRE CO-ORDINATE POSITIONS OF THE PLINE (PPLI) AT (0.5X DER LEN) ON THE N/AQ

54、POSSGIVES THE CE START CO-ORDINATESQ POSS POSEGIVES THE CE BOTH END CO-ORDINATESQ POST FITTGIVES THE C/FITT CO-ORDINATES (START)Q POST IN $V1GIVES THE CE DISTANCE TO VAR.$V1Q POST PLRF (DRAFT)GIVES THE CURRENT VSEC CO-ORDSQ PRLSGIVES THE DESP NAME TYPESQ PT (PIPING)GIVES THE CE (PIPE TAIL) ATTRIBUTESQ PT OD (PIPING)GIVES THE CE (PIPE TAIL) DIAMETERQ PURPGI