法国焊接标准NF welding standards

1、编号中文名称英文名称NF A03-720-2-2002混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接纤维(Steel for the reinforcement and prestressing of concrete - Test methods - Part 2 : welded fabric.)NF A35-018-1984钢筋混凝土用钢筋.焊接的适合性(Concrete reinforcing bars. Suitability for welding.)NF A35-019-2-1996钢筋混凝土用钢筋.可焊刻痕丝制钢筋.第2部分:焊接钢筋网(Concrete reinforci

2、ng steels. Reinforcing steels made of weldable indented wires. Part 2 : welded fabric.)NF A35-021-1998混凝土用钢材.用于增强钢制备的可焊接金属线(STEELS FOR CONCRETE. WELDABLE WIRES USED FOR THE FABRICATION OF REINFORCING STEELS.)NF A35-052-1987钢铁产品.带改进粘附性的焊接钢丝网和钢丝用非合金钢线材(Iron and steel. Unalloyed steel wire rod for weld

3、ed fabric and wire with improved adherence.)NF A36-000-1979结构钢和锅炉与压力容器用钢的焊接特性的推荐规范(RECOMMENDATIONS CONCERNING THE WELDABILITY OF STRUCTURAL STEEL AND OF BOILER AND PRESSURE VESSELS STEEL.)NF A36-205-5-2003压力容器用钢制扁平产品.第5部分:热机轧制的可焊接细粒钢(Flat products made of steels for pressure purposes - Part 5 : weld

4、able fine grain steels, thermomechanically rolled.)NF A36-205-6-2003压力容器用钢制扁平产品.第6部分:可焊接淬火和回火细粒钢(Flat products made of steels for pressure purposes - Part 6 : weldable fine grain steels, quenched and tempered.)NF A36-211-1997焊接气体气缸用薄钢板和条带(Steel sheet and strip for welded gas cylinders.)NF A36-212-20

5、02固定近海结构的可焊接结构钢.技术交货条件(Weldable structural steels for fixed offshore structures - Technical delivery conditions.)NF A36-226-2001具有规定的高温特性的压力容器用热轧可焊接钢棒(Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties.)NF A36-605-1982锅炉和压力容器用焊接钢冲压锻件.碳钢和碳锰钢.牌号与型号(Weld

6、able steel drip forged articles for boilers and pressure vessels. Carbon and carbon-manganese steels. Grades and types .)NF A36-606-1982锅炉和压力容器用焊接钢冲压锻件.钼、锰钼和铬钼合金钢.牌号和型号(Weldable steel drop forged articles for boilers and pressure vessels. Mo, Mn/Mo and Cr/Mo alloy steels. Grades and types.)NF A36-62

7、0-4-1999承压用钢锻件.第4部分:高弹性强度的可焊接细粒钢(STEEL FORGINGS FOR PRESSURE PURPOSES. PART 4 : WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH. (EUROPEAN STANDARD EN 10222-4).)NF A36-620-4/A1-2002承压用钢锻件.第4部分:高弹性强度的可焊接细晶粒钢(Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proo

8、f strength.)NF A49-004-1984钢管.无缝管和圆截面焊接管及焊接配件.尺寸总图及优选(Steel tubes. Seamless and welded tubes with circular section and supplies to be welded. General outlay of dimensions. Preferential selection.)NF A49-005-2003焊接和无缝钢管.管的尺寸和单位长度重量的一览表(Seamless and welded steel tubes - General tables of dimensions an

9、d masses per unit length.)NF A49-141-1978钢管.一般商业用中压平端焊接钢管.（尺寸.交货技术条件.）(STEEL TUBES. WELDED PLAIN END TUBES OF COMMERCIAL QUALITY FOR GENERAL PURPOSES AT MEAN PRESSURE. DIMENSIONS TECHNICAL DELIVERY CONDITIONS.)NF A49-145-1978钢管.热加工细螺纹焊接钢管.（尺寸.交货技术条件.）(STEEL TUBES. HOT-FINISHED WELDED TUBES SUITABLE

10、FOR THREADING.DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-147-1980钢管.一般用和管道用光端纵向焊接钢管.奥氏体不锈钢.（尺寸.交货技术条件.）(STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-148-1980钢管.一般用和管道用光端纵向焊接钢管.

11、铁素体不锈钢.（尺寸.交货技术条件.）(STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-150-1985钢管.水管系统用涂覆或保护焊接管.尺寸.交货技术条件(Steel tubes. Welded tubes intended to be coated or protected for use in water piping

12、systems. Dimensions. Technical delivery conditions.)NF A49-151-2003包括饮用水在内的含水液体输送用焊接不锈钢管.交货技术件(Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.)NF A49-160-1979钢管.混凝土包的加热板用的焊接钢管.（尺寸.交货技术条件.）(STEEL TUBES. WELDED T

13、UBES FOR HEATING PANELS ENCASED IN CONCRETE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-170-1-1999对缝焊接管道配件.第1部分:一般使用和无特殊检验要求的锻碳钢(Butt-welding pipe fittings - Part 1 : Wrought carbon steel for general use and without specific inspection requirements.)NF A49-189-1980钢管.90度镀锌3d样式的焊接曲线.（尺寸.交货技术条件

14、.）(STEEL TUBES. BUTT WELDING,NIGHT-ANGLED BENDS,3D,GALVANIZED DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-191-1975钢管.毛细管焊接或焊接钎接用钢或铸铁接头.（尺寸.交货技术条件.）(STEEL TUBES. SPIGOT OR MIXED CONNECTIONS MADE OF STEEL OR CAST IRON FOR CAPILLARY BRAZING OR BRAZE WELDING. DIMENSIONS. TECHNICAL DELIVERY CONDITI

15、ONS.)NF A49-192-1981钢管.压力容器用内螺纹非合金钢焊接套管(STEEL TUBES. WELDED RINGS,INTERNALLY THREADED,FOR PRESSURE EQUIPMENT.)NF A49-201-1-2002焊接压力钢管.交货技术条件.第1部分:规定室温特性的非合金钢管(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature pro

16、perties.)NF A49-201-2-2002焊接压力钢管.交货技术条件.第2部分:规定高温特性的电焊合金和非合金钢管(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2 : electric welded non-alloy and alloy steel tubes with specified elevated temperature properties.)NF A49-201-3-2002焊接压力钢管.交货技术条件.第3部分:合金细晶粒结构钢管(Welded stee

17、l tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.)NF A49-201-4-2002焊接压力钢管.交货技术条件.第4部分:规定低温特性的电焊非合钢管(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4 : electric welded non-alloy steel tubes with specified low temper

18、ature properties.)NF A49-201-5-2002焊接压力钢管.交货技术条件.第5部分:规定高温特性的埋弧焊接非合金和合金钢管(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5 : submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties.)NF A49-201-6-2002焊接压力钢管.交货技术条件.第6部分:规定低温特

19、性的埋弧焊接非合金钢管(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6 : submerged arc welded non-alloy steel tubes with specified low temperature properties.)NF A49-244-1993钢管.压力设备用焊接奥氏体不锈钢和奥氏铁素体轧制钢管的尺寸和技术交货条件(STEEL TUBES. WELDED AUSTENITIC STAINLESS AND AUSTENITIC FERRITIC S

20、TEEL ROLLED TUBES FOR PRESSURE SERVICE. DIMENSIONS, TECHNICAL CONDITIONS FOR DELIVERY.)NF A49-247-1981钢管.热交换器用纵向焊接钢管.奥氏体不锈钢.尺寸.交货技术条件(Steel tubes. Tubes welded longitudinally for heat exchangers. Austenitic stainless steels. Dimensions. Technical delivery conditions.)NF A49-249-1980钢管.食品工业用光端纵向焊接钢管.

21、奥氏体不锈钢.尺寸.交货技术条件(Steel tubes. Longitudinally welded plain end tubes for the food industry. Austenitic stainless steels. Dimensions. Technical delivery conditions.)NF A49-285-1982钢管.有质量要求的非合金或合金钢制对缝焊接椭圆底座.尺寸.交货技术条件(Steel tubes. Unalloyed or alloy steel butt welding elliptic caps with quality requirem

22、ents. Dimensions. Technical delivery conditions.)NF A49-289-1990钢管.用于高低温条件下的对缝焊接管状配件.非合金、合金和不锈钢.尺寸.技术交货条件(Steel tubes. Butt welding tubular fittings used at low and high temperature. Non alloy, alloy and stainless steels. Dimensions. Technical delivery conditions.)NF A49-296-1983钢管.带质量要求的熔焊非合金或合金钢制等

23、径或缩径焊接三通管.尺寸.交货技术条件(Steel tubes. Unalloyed or alloy steel butt welding tees made by saw process with equal or reduced branches, with quality requirements. Dimensions. Technical delivery conditions.)NF A49-300-2-2003精密装置用钢管.交货技术条件.第2部分:焊接冷拉管(Steel tubes for precision applications - Technical delivery

24、 conditions - Part 2 : welded cold drawn tubes.)NF A49-300-3-2003精密装置用钢管.技术交货条件.第3部分:焊接冷分级管(Steel tubes for precision applications - Technical delivery conditions - Part 3 : welded cold sized tubes.)NF A49-300-5-2003精密用途钢管.技术交货条件.第5部分:焊接冷精加工方形和矩形钢管(Steel tubes for precision applications - Technical

25、delivery conditions - Part 5 : welded and cold sized square and rectangular tubes.)NF A49-341-1975钢管.机械用精密焊接钢管.（尺寸.交货技术条件.）(STEEL TUBES-PRECISION WELDED TUBES FOR MECHANICAL APPLICATION-DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-343-1980钢管.机械用D小于或等于168.3mm的纵向焊接钢管.（尺寸.交货技术条件.）(STEEL TUBES. LON

26、GITUDINALLY WELDED D INFERIOR OR EQUAL TO 168,3 MM FOR ENGINEERING USE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-540-1-1997非合金细晶粒结构钢的冷成形焊接结构空心型材.第1部分:交货技术要求(Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 1 : technical delivery requirements.)NF A49-647-1

27、979钢管.不锈钢、铁素体和奥氏体钢制圆形、正方形、矩形或椭圆形建筑用焊接钢管.（尺寸.交货技术条件.）(STEEL TUBES. STRUCTURAL WELDED TUBES,CIRCULAR,SQUARE,RECTANGULAR OR OVAL,IN FERRITIC OR AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL CONDITIONS OF DELIVERY.)NF A49-716-1998钢管.焊接接头镀膜配件和管的外结构.(STEEL TUBE. EXTERNAL CONSTITUTION OF TUBE AND FITT

28、ING COATING FOR WELDED JOINT.)NF A49-875-1-1996钢管的无损检测.第1部分:证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验(Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.

29、)NF A49-875-11-2000钢管的无损检验.第11部分:检测表面缺陷用无缝和焊接钢管的液体渗透试验(Non-destructive testing of steel tubes - Part 11 : liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections.)NF A49-875-12-2000钢管的无损检验.第12部分:检测表面缺陷用无缝和焊接锰钢管的磁粉检测(Non-destructive testing of steel tube

30、s - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections.)NF A49-875-13-2000钢管的无损检验.第13部分:无缝和焊接(埋弧焊)钢管的自动全周边超声厚度检测(Non-destructive testing of steel tubes - Part 13 : automatic full peripheral ultrasonic thickness testing f

31、or seamless and welded (except submerged ar welded) steel tubes.)NF A49-875-14-2000钢管的无损检验.第14部分:层面缺陷探测用无缝钢管和焊接(除埋弧焊外)钢管的自动超声试验(Non-destructrive testing of steel tubes - Part 14 : automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes detection of laminar imper

32、fections.)NF A49-875-15-2000钢管的无损检验.第15部分:层面缺陷探测用焊接钢管的生产用焊接带材/板材自动超声试验(Non-destructive testing of steel tubes - Part 15 : automatic ultrasonic testing of strip/plate used in the manufacure of welded steel tubes for the detection of laminar imperfections.)NF A49-875-16-2000钢管的无损检验.第16部分:层面缺陷探测用焊接钢管的焊

33、缝邻近区域的自动超声试验(Non-destructive testing of steel tubes - Part 16 : automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections.)NF A49-875-17-2000钢管的无损检验.第17部分:层面缺陷探测用无缝和焊接钢管末端超声试验(Non-destructive testing of steel tubes - Part 17 :

34、 ultrasonic testing of tubes ends of seamless and welded steel tubes for the detection of laminar imperfections.)NF A49-875-18-2000钢管的无损检验.第18部分:层面缺陷探测用无缝和焊接锰钢管末端磁粉检验(Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic ste

35、el tubes for the detection of laminar imperfections.)NF A49-875-2-2000钢管的无损检验.第2部分:检验液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管(埋弧焊除外)的自动涡流试验(Non-destructive testing of steel tubes - Part 2 : automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tu

36、bes for verification of)NF A49-875-3-2000钢管的无损检验.第3部分:检测缺陷用无缝和焊接钢管(埋弧焊除外)的自动涡流试验(Non-destructive testing of steel tubes - Part 3 : automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections.)NF A49-875-5-2000钢管的无损检验.第5部分:检测纵向缺陷用

37、无缝和焊接(除埋弧焊)锰钢管的自动全周边电磁变换器/磁漏试验(Non-destructive testing of steel tubes - Part 5 : automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for)NF A49-875-7-1996钢管的无损试验.第7部分:纵向缺陷探测用无缝钢管和焊接(除埋弧焊外)钢管的自动全周边超声波试验(Non

38、destructive testing of steel tubes. Part 7 : automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections.)NF A50-425-1998轻金属及其合金.危险产品传输箱构造可焊接产品(ALUMINIUM AND ALUMINIUM ALLOYS. WELDABLE PRODUCTS FOR THE

39、CONSTRUCTION OF TANKS FOR THE TRANSPORTATION OF DANGEROUS GOODS.)NF A50-650-4-1997铝和铝合金.挤压棒材.焊接设备的特殊要求(Aluminium and aluminium alloys. Drawing stock. Part 4 : specific requirements for welding applications.)NF A50-802-1988铝和铝合金.大直径焊接管.尺寸和公差(ALUMINIUM AND ALUMINIUM ALLOYS. LARGE DIAMETER WELDED TUBES

40、. DIMENSIONS AND TOLERANCES.)NF A51-307-2003铜和铜合金.焊接和钎焊用棒材和线材(Copper and copper alloys - Rod and wire for welding and braze welding.)NF A80-002-2003焊接.焊接和相关工艺的多语种术语列表(Welding - Multilingual list of terms for welding and related processes.)NF A80-010-1997焊接.工作位置.坡度角和旋转角的定义(Welds. Working positions. D

41、efinitions of angles of slope and rotation.)NF A80-021-2000焊接及有关工艺.工艺和参考值的命名(Welding and allied processes - Nomenclature of processes and reference numbers.)NF A80-022-1999焊接.带说明的多语种接头术语(WELDING. MULTILINGUAL TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS. (EUROPEAN STANDARD EN 12345).)NF A80-230-1-1998

42、焊接和合金过程.金属材料几何缺陷的分类.第1部分:熔焊(欧洲标准6520-1)(Welding and allied processes. Classification of geometric imperfections in metallic materials. Part 1 : fusion welding.)NF A80-230-2-2003焊接和相关工艺.金属材料中几何缺陷的分类.第2部分:带压焊接(Welding and allied processes - Classification of geometric imperfections in metallic materia

43、ls - Part 2 : welding with pressure.)NF A81-053-1989焊接.钎焊.硬钎焊.焊条.验收试验规程(WELDING. BRASING. SOLDERING. BRAZE-WELDING. FILLER MATERIALS. ACCEPTANCE TESTING PROCEDURES.)NF A81-056-2000焊条.焊接及有关工艺用焊条的生产、供应和分配的质量要求(Welding consumables - Quality requirements for manufacture, supply and distribution of consu

44、mables for welding and allied processes.)NF A81-303-2003手工电弧焊用涂敷焊条.焊接金属沉积方法.硬度试验(Covered electrodes for manual metal arc welding - Procedure for the deposition of weld metal - Hardness tests.)NF A81-304-2002焊接消耗品.化学分析用的焊接金属垫片的沉积(Welding consumables - Deposition of a weld metal pad for chemical analy

45、sis.)NF A81-305-2001焊接和有关工艺.铁素体钢电弧焊金属中氢含量的测定(Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal.)NF A81-309-1995焊接可熔化性.非合金和低合金钢的手工金属弧焊接用药皮焊条(Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classif

46、ication.)NF A81-320-2001焊接消耗品.通过测量可扩散氢测定手工电弧焊电极的抗湿性(Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen.)NF A81-325-1997焊条.非合金钢和细晶粒钢制惰性气体保护钨焊接用棒材,线材和镀层(WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT

47、 GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).)NF A81-331-1984焊接、硬钎焊和硬焊铝及铝合金用填充金属材料.符号.规范(Filler materials for welding, brazing and braze welding aluminium and aluminium alloys. Symbolization. Specifications.)NF A81-340-1997焊条.高强度钢的手工电弧焊接用金属药皮焊条.分类(欧洲标准

48、EN 757)(Welding consumables. Covered electrodes for manual metal arc welding of high strength steels. Classification.)NF A81-350-1997焊条.非合金钢及细粒钢的有和无气体保护的金属电弧焊接用管状焊丝.分类(欧洲标准EN 758)(Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non aloy and fine g

49、rain steels. Classification.)NF A81-361-1999焊接.填充材料(欧洲标准EN 1044)(Brazing. Filler metals.)NF A81-362-2002焊接.软钎焊.钎焊.硬钎焊.软钎焊、钎焊及硬钎焊用焊料.分类、编码和验收试验(Welding, soldering, brasing, braze-welding - Filler metals for soldering, brazing and braze-welding - Classification, coding, acceptance testing.)NF A81-369-

50、1995软钎焊、硬钎焊接和铜焊用填充金属.命名(欧洲标准EN ISO 3677)(FILLER METAL FOR SOFT SOLDERING, BRAZING AND BRAZE WELDING. DESIGNATION. (EUROPEAN STANDARD EN ISO 3677).)NF A81-410-1984铝和铝合金.焊接、硬钎焊和钎焊.基础产品和焊条的选择(ALUMINIUM AND ALUMINIUM ALLOYS. WELDING,BRAZING AND BRAZE WELDING. BASE MATERIALS AND SELECTION OF FILLER MATER

51、IALS.)NF A81-900-1973铝和铝合金.焊接.焊剂的使用和检查(ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. USE AND TESTING OF WELDING FLUXES.)NF A82-001-1990电阻焊接设备.电阻焊和类似技术用电焊机电气设备的安全规程(Safety requirements for the construction and the installation of equipment for resistance welding and allied processes.)NF A82-020-1985电阻焊接.电

52、阻焊机.规范和试验(Electric resistance welding. Machines for electric resistance welding. Specifications and tests.)NF A82-025-1986电阻焊接.整流电流的电阻焊机.规范和试验(ELECTRIC RESISTANCE WELDING. MACHINES FOR ELECTRIC RESISTANCE WELDING WITH RECTIFIED CURRENT. SPECIFICATIONS AND TESTS.)NF A82-030-1992电阻焊接设备的图形符号(Graphical

53、symbols for resistance welding equipment.)NF A82-040-1985电阻焊接.电阻焊机用变压器.适用于所有变压器的通用规范(Electric resistance welding. Transformers for resistance welding machines. General specifications applicable to all transformers.)NF A82-041-1987电阻焊接.汽车工业中多点焊接用的带分离式二次线组的变压器.特殊规范(Resistance welding. Transformers wit

54、h two separate secondary windings for multispot welding as used in automobile industry. Particular specifications.)NF A82-043-1996电阻焊接.焊接枪用集成变压器(Electric resistance welding. Integrated transformers for welding guns.)NF A82-045-1986电阻焊接.电阻焊机用多组整流器.规范和试验(ELECTRIC RESISTANCE WELDING. RECTIFIER EQUIPMEN

55、T FOR RESISTANCE WELDING MACHINES. SPECIFICATIONS AND TESTS.)NF A82-100-1987电阻焊接.电阻焊接用电极材料及辅助设备(Electric resistance welding. Materials for resistance welding electrodes and ancillary equipments.)NF A82-104-1-2000电阻焊接设备.电极接头,外锥度1:10.第1部分:圆锥形接头,锥度1:10(Resistance welding equipment - Electrode adaptors,

56、 male taper 1:10 - Part 1 : conical fixing, taper 1:10.)NF A82-105-1985电阻焊接.带电极帽、内锥度配合和凸头电极帽的直电阻点焊电极.尺寸和公差(锥度1/10)(Electric resistance welding. Straight resistance spot welding electrodes with caps, male taper fits and male caps. Sizes and tolerances (taper 1/10).)NF A82-108-1992焊接滚轮坯料的尺寸(Dimensions

57、 of seam welding wheel blanks.)NF A82-110-2001电阻焊接设备.与水冷部分连接的二级连接电缆.尺寸和特性(Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics.)NF A82-112-2-2002电阻焊接水冷次级线圈连接电缆.第2部分:单根导线连接电缆的尺寸及要求(Water-cooled secondary connection cables for resistance welding - Part 2 : dimensions and requirements for single-conductor connection cables.)NF A82-112-3-1996电阻焊接水冷次级线圈连接电缆.第3部分:试验要求(WATER-COOLED SECONDARY CONNECTION CABLES FOR RESISTANCE WELDING. PART 3 : TEST REQUIREMENTS. (EUROPEAN STANDARD EN ISO 8205-3)