intouch怎么通过DASMBTCP与施耐德以太网通讯

1、Configuring MBTCP (Version 1.0) to Communicate with a MODICON BridgeThis document and software are provided as is without warranty of any kind. See the Terms of Use for more information.IntroductionThe MBTCP DAServer is one of Wonderwares new generation of Archestra-based products that provides conn

2、ectivity to the following plcs via Ethernet: Quantum TSX Momentum Modicon Micro Note: The above three plcs are the only ones currently supported by this release.This technote provides step by step instructions for configuring each faceplate (screen) within the SMC (System Management Console) where t

3、he DAS MBTCP DASServer resides.Adding a New_TCPIP_PORT_0001. Open the SMC from the Start menu (Start/Programs/Wonderware).Figure 1: SMC2. Expand the ArchestrA.DASMBTCP.1 server icon.3. Right-click Configuration (just below Archestra.DASMBTCP.1) and select Add.A new faceplate will appear labeled New_

4、TCPIP_PORT_000 (Figure 2 below):Figure 2: New_TCPIP_PORT_000Note: You can right click on any of the entries below the Configuration entry above and rename it to whatever you like.Adding a New_ModbusBridge_000 Object1. Right Click New_TCPIP_ Port_000 and select Add a ModbusBridgeObject (Figure 3 belo

5、w):Figure 3: Add ModbusBridge ObjectYou should now see a new faceplate appear labeled New_ModbusBridge_000 Object (Figure 4 below):Figure 4: New ModbusBridge Faceplate Note: You will need to enter in the IP Address of the BRIDGE DEVICE, as shown in Figure 4 above.Adding a PLC Object1. Right click th

6、e New_ModbusBridge_000 icon and add a plc device. (In the following figure, a Modicon_Micro_000 object is selected. It is a 5 digit device):Figure 5: Add ModiconMicro ObjectFigure 6: New_ModiconMicro_000 Faceplate2. Enter the Slave device of the plc in the PLC unit ID field (Figure 6 above). Set Up

7、a Topic Definition in the Device GroupSetting up a Topic Definition must be done so that Suitelink/DDE clients can communicate with the MBTCP DAServer.1. Select the Device Groups tab (Figure 6, above). 2. Right click in the first row, and select Add. Figure 7: Add TopicA new topic appears (Figure 8,

8、 below):Figure 8: Add Topic3. Change Topic_0 to whatever you want by right-clicking on it and selecting Rename. In the following figure, the Topic is called Micro (Figure 9 below):Figure 9: Rename the Topic Creating an Access Name in InTouch to Communicate with the DASMBTCP Server1. Launch InTouch WindowMaker.2. Select Configure/Access Names from the main menu.The Modify Access Name dialog box appears:Figure 10: Application Name - DASMBTCP3. Enter the above information for the Application Name field as it appears in Figure 10. 4. For the