以下我翻译的一篇外文文献的摘要部分_第1页
以下我翻译的一篇外文文献的摘要部分_第2页
以下我翻译的一篇外文文献的摘要部分_第3页
全文预览已结束

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

1、以下我翻译的一篇外文文献的摘要部分,下面是英文原文。Abstract: The Samanalawewa and Udawalawe reservoirs were built to harness the hydro-energy and irrigation potentials of the Walawe river in Sri Lanka. The recently completed Samanalawewa reservoir primarily generates hydropower while the Udawalawe reservoir, which was built

2、 in the 1960s, supplies water mainly for irrigation. With the addition of the Samanalawewa reservoir, located upstream of the Udawalawe reservoir, the government of Sri Lanka is planning to increase the irrigated area of the Udawalawe reservoir. The Samanalawewa reservoir is expected to act as an ad

3、ditional storage for irrigation water supply. A study was carried out to investigate the operational behavior of these two reservoirs. The model used in the study is based on stochastic dynamic programming (SDP) and simulation techniques. Since, the direct application of SDP for two reservoirs is li

4、mited by the dimensionality of the problem, a sequential decomposition method is employed in the model. The algorithm employed breaks down the system into single- reservoir subsystems and subsequently, each subsystems operation is individually optimized using a SDP based optimization model and then

5、simulated using a reservoir operation simulation model. The results indicate the usefulness of optimization techniques in planning reservoirs and deriving operational policies for them. The inclusion of the Samanalawewa reservoir reduces the irrigation water supply deficits at the Udawalawe reservoi

6、r. 下面是我翻译的摘要,请批评指教! 为了利用Walave河水力发电和灌溉的潜力,建造了Samanalawewa 和 Udawalawe水库,刚建成的Samanalawewa 水库主要是用来发电的,而20世纪60年代建成的Udawalawe水库主要提供灌溉用水。Samanalawewa水库位于Udawalawe水库的上游,它的建成使得斯里兰卡政府计划增加Udawalawe水库的灌溉面积。准备将Samanalawewa水库作为灌溉用水的另一储备。为此对这两个水库的调度情况进行了研究。本研究所用的模型基于随机动态规划和模拟技术。由于直接运用动态规划受到维数的限制,本模型采用了时序分解方法这个算法将系统分解成单个水库的子系统,每个子系统采用基于随机动态

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

评论

0/150

提交评论