PPG电泳漆P6000PX手册

1、Product Book Iet产品手册Attributes产品特点Product Evo Iut i on产品的发展史Advantages产品优点Performance Data产品性能数据Approvals认可Commercial Uses 商业应用electrocoat. This without the use of suitable for use topcoatabiIity of aPOWERCRON 6000PX is an improved version of PPG product was formulated to meet heavy meta I s (nameI

2、y lead and in applicat ions either where primer is required.Industries* sixth-generat ion cathodic epoxy the automotive industry corrosion requirements chrome) in the paint film. This product is a “primer only'* is specified, or wherePOWERCRON 6000PX是PPG公司第六代阴极环It电冰漆的改进型产品。这种产品的推出是为了在漆膜中无重金属 （即铅

3、合格）的情况下，更好的满足汽车工业防腐的要求。这种产品适合于单独底漆涂装或涂装面漆。Eliminate Hazardous Waste消除有害废物Most pr ior cationic epoxy products contained lead or requi red a chrome rinse pretreatment for maximum corrosion performance. Lead and chrome are currently considered hazardous materials, and therefore are regulated. Future le

4、gislation may ban the use of lead and chrome in industr iaI paint formulations and make heavy metal waste disposal increasingly difficult and costly. In addition, automobiIe manufacturers are requiring their suppliers to identify, decrease, and even el iminate lead in the coatings used on their part

5、s. POWERCRON 6000PX wiI I enable customers to meet automotive corrosion requi rements without the use of heavy meta Is in the finishing process.以前大多数阴极环氧电泳漆为了最大限度的提高防腐能力，其配方中含有铅或需要钝化前处理。铅和格是有害物质 并且其使用受到管制。将来的立法可能会禁止在工业涂料的配方中含有铅和俗，而且会使重金属废物处理的难度增 加，成本上升。另外，汽车生产厂商要求在涂装汽车和零部件的涂料中减少或消除铅或络。P0WERCR0N6000P

6、X将会 满足客户对于漆膜无重金属的要求，并且达到汽车防腐的要求。Parts and BodiesPOWERCRON 6000PX was adopted from PPG* s automotive coatings group where it i s used to protect car bodies. It also meets the requi rements of the automotive smalI parts specifications. This product is very we I I suited for most faciI ities painting a

7、utomot i ve parts and / or body panels.P0WERCR0N6000PX是从PPG公司汽车漆部门采用过来的，它曾用于轿车车声防护。它同样达到汽车零部件的防护要 求。这种产品适用于汽车零部件或车身。POWERCRON 6000PX: Improved Sixth Generation Cat ionic Epoxy Technology.POWERCRON 6000PX:改进型第六代阴极环氧电泳漆。First Generation M一代1976POWERCRON 500(ED3002)Second Generation 第二代1979POWERCRON 50

8、0E(ED3002V)Third Generation 第三代1981POWERCRON 600(UN I-PR I ME )Corrosion Protection 防腐蚀Reduced VOC VOC 降低Improved Corrosion Resistance增强防腐能力Improved StabiIity增强稳定性Reduced Effluent Discharge减少排放量Improved TopcoatabiI ity改进与面漆的配合性Reduced We i ght Loss降低加热减量Reduced VOC 降低 VOCReduced Cost降低成本Improved Edg

9、e Coverage提高边缘覆盖率Improved Throwpower 提高泳透力Heavy Meta I-Free 无重金属Improved Performance 改进漆膜性能Reduced VOC 降低 VOCImproved Workabi I ity 改进可使用性Seventh Generat ion 第七代 1995POWERCRON 5901998Fourth Generation 第四代1986POWERCRON 640(ED-4)Fifth Generation 第五代1991POWERCRON 648(ED-5000)Sixth Generat ion 第六代1993PO

10、WERCRON 690(ENVI RO-PRIME )2001POWERCRON 6000PXHeavy Metal-Free 无重金属HAPs-Free无有害空气污染物 Improved Efficiency提高电泳效率Single-Component Feed Package 单组分加料包装POWERCRON 6000PX cathodic epoxy electrocoat was developed with excel lent performance properties in an environmentally friendly package. Specific advant

11、ages include:POWERCRON 6000PX阴极环氧电泳漆具有优秀的漆膜性能和环保的包装。其优点包括：Corrosion Resistance/Heavy Meta I-Free抗腐蚀能力/无重金属TopcoatabiIity面漆可涂装性能Total Coverage整体覆盖性能Aesthetics表观效果Chip Resistance抗石击性Reduced Hazardous WasteDisposaI有害废物排放Improved UF Flux Rates提高超滤流量POWERCRON 6000PX offers super ior corrosion resistance

12、without the use of heavy meta I s. This product i s capable of corrosion protection in excess of 1000 salt-spray hours.POWERCRON 6000PX不含重金属且具有优秀的抗腐蚀能力，盐 雾试验超过1000小时。POWERCRON 6000PX is formuIated for a wide window of topcoat compatibiIity.POWERCRON 6000PX可与多种面漆配合。The excel lent throwpower of POWERC

13、RON 6000PX results in total part coverage, regardless of part comp I ex i ty. Throwpower a I Iows for un i form film thickness over every area of the part.POWERCRON 6000PX具有优异的冰透力，不管零件形状的复杂 程度如何，都能整体覆盖，且膜厚一致。Flow character istics are exceptional, exhibiting a smooth fiIm appearance at less than 1 mi

14、 I fi Im thickness. Excel lent flow control benefits have reduced the tendency for contamination to cause crater ing.卓越的流平性可以使不足1mil漆膜十分平滑，并且减少了由 于污染而导致绵孔的可能性。POWERCRON 6000PX has excel lent chip resistance. A potential site for corrosion occurs when coatings chip down to bare meta I. Reduced chippi

15、ng relates to fewer potential corrosion sites.POWERCRON 6000PX具有优秀的抗石击性。漆膜受撞击后 脱落露出金属表面是产生腐蚀的潜在因素。减少捶击后 期膜的脱落可以减少腐蚀的潜在因素。POV/ERCRON 6000PX is heavy metal-free. Therefore, any solid waste generated should be characterized as non- hazardous and be less expensive to dispose of than lead-containing wast

16、e.POWERCRON 6000PX不含重金属。因此，所损失的固体份是无 害的，而且其废物处理所需的费用要要大大少于含重金属的 涂料。The elimination of lead-contai ning pigments coup led with lower solids and reduced pigment levels usually improves ultrafiIter performance. With POWERCRON 6000PX, flux rates increase and cleaning frequency is reduced.无铅颜料浆，低固体份和低颜料含

17、量可以提高超滤其性能。 POWERCRON 6000PX的使用，可以提高超滤流量，降低超滤膜 清洗频率。Low VOC低voc（VOC：可挥发性有机化合物含量）Minimal EffIuent最小限度的排放POWERCRON 6000PX operates at a Volatile Organic Compound level of less than pounds per gaI Ion. Low emi ssions help to keep our envi ronment safe and healthy, and eliminate permitting headaches.POW

18、ERCRON 6000PX的VOC小于磅/加仑.低挥发量可以保证环 境的安全和人体的健康.Wastewater concerns are vi rtuaI Iy eliminated and permeate discharge is minimal. 只有最小限度的超滤液排放.Property性质Test Method实验方法Performance性能参数Color颜色Film Thickness 膜后-60 Degree 光泽度-60度 Penci 1 Hardness 铅笔硬度 Di rect Impact 冲击 Reverse Impact 背突 Cross-Hatch Adhesio

19、n 划格试验 Humidity 湿雾试验 Water Immersion 水浸试验Gravelometer 石击试验Rust Spot 锈点 Throwpower 泳透力ASTM D523-89ASTM D3363-92AASTM D2794-93ASTM D2794-93ASTM D3359-95ASTM 1735-92ASTM D870-92GM 9508PGM 9632PGM 9535PBlack, Earthtones 黑色，-Mils55 - 752H Mini mum 不低于2H100 in-lb Mini mum 不低于100英寸一磅 60 i n-lb Mini mum 不低于

20、60英寸一磅4B - 5B500 Hours Mini mum 不少于500小时250 Hours Mini mum 不少于250小时6 Mini mum 不小于675 - 100 (Avg.)75 - 100 (平均)11 - 13 Inches11 -13英寸Cold Rolled Steel Lab Panels实验室用冷卷钢板Zinc Phosphate Pretreatment 伸辱化前处理Mi I Average Film Thickness 平均膜厚Cure 20 Minutes H 350 F 固化：20 分钟350FSubstrate/Pretreatment底材/前处理Sa

21、lt Spray* 500 Hours 盐雾500小时Salt Spray* 1000 Hours 盐雾1000小时20 CycIe* Scab 20次循环腐蚀CRS/Z i nc Phos/ChromeCRS/锌磷化/钝化0 -1 mm0 - 2 mm1 - 2 mmCRS/Z i nc Phos/Non-ChromeCRS/锌磷化/无钝化0 - 1 mm1 - 2 mm1 - 2 mmCRS/Z i nc Phos/DI WaterCRS/锌磷化/去离子水洗0 - 1 mm1 - 3 mm1 - 4 mmCRS/Iron Phos/ChromeCRS/铁磷化/钝化0 - 3 mm3 - 6

22、 mm3 - 8 mmCRS/Iron Phos/Non-ChromeCRS/铁磷化/无拢化0 - 3 mm3 - 6 mm3 - 8 mmCRS/Iron Phos/DI WaterCRS/铁磷化/去离子水洗4 - 8 mm6 - 14 mm10 - 20 mmCRS/Untreated CRS/未前处理3 - 5 mm5 - 8 mm11 - 15 mmGalvanized/Zinc Phos/Chrome 电镀/锌磷化/钝化一一一一一一一一 一_0 - 2 mm(Average Total Scribe Creep)平均锈蚀宽度Salt Spray - ASTM B117-97 拉雾试脸

23、标淮-ASTM B117-97 Cycle Scab - GM9511P 提环腐蚀试脸标准 GM9511PCold Rolled Steel Lab Panels实险室用冷卷钢板Cure 20 Minutes 350 F 固化：20 分钟350FPOWERCRON 6000PX is approved under the following specifications.POWERCRON 6000PX已通过如下认可：Automot i ve Partsand Accessories汽车零部件Specification No.Status规篦文件号状态DaimlerChryslerMS-PB4

24、5-2Approved 通过戴姆勒克莱斯勒FordWSS-M6J152B1-B5Approved 通过福特WSB-M64J28Approved 通过ESB-M64J19Approved 通过ESB-M64J23Approved 通过ESB-M64J25Approved 通过WSB-M64J30Approved 通过WSB-M64J36Approved 通过ESL-M2P122A1-A5Approved 通过ESE-M2P128AApproved 通过ESA-M2P13A1-A3Approved 通过WSS-M2P177A2Approved 通过ESB-M64J12-B1-B3Approved 通过ESB-M64J19A1-A3Approved 通过ESB-M64J20A1-A3Approved 通过WSB-M64J28A1-A3Approved 通过WSB-M64J36A1-A3Approved 通过WSB-M64J38A1-A4Approved 通过WSS-M64J39A1-A5Approved 通过WSS-M64J41A1-A5Approved 通过General Motors9984120Approved 通过通用汽车Approved fo