台州学院本科毕业设计文本材料板式与要求

1、题目学院专业班级学号学生姓名指导教师完成日期本科毕业设计（论文）（2015届）宋体四号、加粗宋体四号、加粗宋体四号、加粗宋体四号、加粗宋体四号、加粗宋体四号、加粗宋体四号、加粗宋体四号、加粗台州学院生命科学学院本科毕业设计（论文）此页不标注页码XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX内容宋体小题目（宋体，加粗，小二号字，居中）学生：姓名指导老师：姓名设计总说明：XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

2、XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX（标题黑体小四号，内容宋体小四号，1.5倍行距）要求：摘要的字数为200字左右，不超过300字为宜。关键词：XXXX；XXXX；XXXX（标题黑体小四号，五号）要求：关键词3-5个，中间用“；”间隔。外文题目（TimesNewRoman,加粗，小二号字,居中）Undergraduatestudent:nameAdvisor:nameGeneralEx

3、planationforDesign:xxxxxxxxxxxxxxxxxxx（TimesNewRoman小四号、标题加粗内容不加粗）要求：外文翻译的内容要与设计总说明的中文保持一致。Keywords:xxxx；xxxx；xxxx.（TimesNewRoman小四号、标题加粗内容不加粗）要求：外文关键词要与中文关键词保持一致，中间用“；”间隔。台州学院生命科学学院本科毕业设计（论文） II目录（宋体，加粗，小二号字，居中）要求：目录内容为宋体小四号字。目录创建时：1“插入引用索引和目录”；2选择“目录”选项卡，同时注意勾选其中的“页码右对齐”；3目录还应包含参考文献、致谢、附录；4目录自动生成后

4、，如果正文内容有所修改，请右键单击目录，在菜单中选择“更新域”命令，重新更新目录。TOC o 1-5 h z HYPERLINK l bookmark10 设计方案说明书1前言（文中一级标题宋体小二号字加粗，段前段后各0.5行,1.5倍行间距）1 HYPERLINK l bookmark12 项目概述1 HYPERLINK l bookmark14 行业背景情况（宋体五号字加粗）1 HYPERLINK l bookmark16 项目基本情况（宋体五号字加粗）1 HYPERLINK l bookmark18 设计依据与规范1 HYPERLINK l bookmark20 xxxx处理工艺论证1

5、HYPERLINK l bookmark22 设计条件1 HYPERLINK l bookmark24 设计指标1 HYPERLINK l bookmark26 排放标准（或达到目标值）1 HYPERLINK l bookmark28 XXXX常用处理技术及工艺2 HYPERLINK l bookmark30 XXXX处理工艺比选及论证2 HYPERLINK l bookmark32 主体工程设计2 HYPERLINK l bookmark34 主体构筑物设计参数及附属设备2 HYPERLINK l bookmark36 XXXX2XXXX2 HYPERLINK l bookmark38 工艺

6、运行参数2 HYPERLINK l bookmark40 通用工程设计3 HYPERLINK l bookmark42 土建设计3 HYPERLINK l bookmark44 建筑设计要点3 HYPERLINK l bookmark46 结构设计要点3 HYPERLINK l bookmark48 电气及自动化控制设计3 HYPERLINK l bookmark50 供电设计3 HYPERLINK l bookmark52 动力配电及电缆敷设3 HYPERLINK l bookmark54 照明配电3 HYPERLINK l bookmark56 接地与防雷4 HYPERLINK l boo

7、kmark58 测量与控制系统4 HYPERLINK l bookmark60 工程投资概预算4 HYPERLINK l bookmark62 编制说明4 HYPERLINK l bookmark64 工程投资及运行概算4 HYPERLINK l bookmark66 土建工程费用4 HYPERLINK l bookmark68 安装工程费用4 HYPERLINK l bookmark70 运行费用5 HYPERLINK l bookmark72 工程投资效益分析5 HYPERLINK l bookmark76 设计方案计算书6主体构筑物计算（宋体小二号字加粗，居中，段前、段后各0.5行，1.

8、5倍行间距）.61.1xxxxx6xxxxx（宋体五号字加粗）61.3xxxxxxx（宋体五号字加粗）61.4xxxxxx6 HYPERLINK l bookmark80 *总体布置6 HYPERLINK l bookmark82 2.1总平面布置6 HYPERLINK l bookmark84 高程布置62.3施工要求7 HYPERLINK l bookmark86 参考文献（宋体，加粗，小二号字，居中）8 HYPERLINK l bookmark108 致谢（宋体，加粗，小二号字，居中）10 HYPERLINK l bookmark110 附图（宋体，加粗，小二号字，居左）11台州学院生命

9、科学学院本科毕业设计（论文） 设计方案说明书前言（文中一级标题宋体小二号字加粗，段前段后各0.5行,1.5倍行间距）项目概述xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx行业背景情况（宋体五

10、号字加粗）xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX（正文：宋体五号，段前、段后各0行，1.5倍行距，首行缩进2字符）项目基本情况（宋体五号字加粗）XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

11、XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX设计依据与规范XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

12、XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXxxxx处理工艺论证设计条件设计指标XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

13、XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX排放标准（或达到目标值）XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

14、xxxxxxxxXXXX常用处理技术及工艺xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXXXX处理工艺比选及论证主体工程设计主体构筑物设计参数及附属设备xxxxxxxxxxxxxxxxxx

15、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXXXXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

16、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx3.1.2XXXXxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

17、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx工艺运行参数xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

18、xxxxxxxxxxxxx通用工程设计xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx土建设计建筑设计要点xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

19、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx结构设计要点xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

20、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx电气及自动化控制设计xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

21、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx供电设计xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx动力配电及电缆敷设xx

22、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx照明配电xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

23、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx接地与防雷xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

24、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx测量与控制系统xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

25、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx工程投资概预算编制说明xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

26、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx工程投资及运行概算Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

27、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx土建工程费用xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx安装工程费用xxxxx

28、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx运行费用xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

29、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx工程投资效益分析（环工专业的可从占地面积、（吨水）投资费用、（吨水）运行费用等指标分析）xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

30、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx正文：宋体五号，段前、段后各0行，1.5倍行距，首行缩进2字符）设计方案计算书1主体构筑物计算（宋体小二号字加粗，居中，段前、段后各0.5行，1.5倍行间距）（按工艺中的构筑物逐一进行计算，给出计算公式、参数选择依据及计算过程）1.1xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

31、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx1.2xxxxx（宋体五号字加粗）xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

32、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX（正文：宋体五号，段前、段后各0行，1.5倍行距，首行缩进2字符）1.3xxxxxxx（宋体五号字加粗）XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

33、XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX1.4xxxxxxXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

34、XXXXXXXXXXXXXXXXX2*总体布置2.1总平面布置XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX2.2高程布置xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

35、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx2.3施工要求有关正文的具体要求如下：（一）正文章节编号顺序：依次为1、1.1、1.1.1、（1）、（二）正文一般应分为几个大的部分，每个部分应由小标题；正文中引用的符号较多，可在正文前列出符号表；正文中引用的技

36、术数据要注明出处；正文中引用的重要论断要注明作者，年份。（三）正文中的注释采用脚注或尾注。其格式为：著作：作者姓名书名M.xx：出版社，xxxx,xx.论文：作者姓名论文题目D.杂志名称，xxxx（）：xx.以英文大写字母方式标识各种参考文献，专著M、论文集C、报纸文章N、期刊文章J、学位论文D、报告R。注释字体为宋体，六号字。（四）毕业论文（设计）的文本主体字数要求在10000字左右，不包括开题报告、文献综述和外文文献翻译等。（五）毕业论文需有封面、中文摘要、中文关键词、英文摘要、英文关键词、目录、正文、参考文献、致谢、附录（与本论文相关的设计资料：源程序主要代码、设计图纸等）。（六）参考文

37、献一般不低于15本（篇）（必须包含至少2篇英文文献），引用格式与正文注释一致。（七）正文部分添加页眉，奇偶页页面不同，奇数页为：台州学院生命科学学院本科毕业设计（论文），偶数页为：具体的论文题目（请.自.行.修.改.）。（八）外文摘要后一页开始设置页码，目录页码用I、II、III，正文、参考文献等页码用1、2、3.数字连续编号，设置在页脚，居中。参考文献（宋体，加粗，小二号字，居中）要求：参考文献应在15篇以上，其中外文资料不应少于两篇。任务书和文献综述中所列的参考文献务必要在论文所列的参考文献中体现出来。1、专著著录格式（宋体/TimesNewRoman，五号）序号著者.书名M.版本（第一版

38、不写）.出版地：出版者，出版年.起止页码例:孙家广，杨长青.计算机图形学M.北京：清华大学出版社,1995.2628SkolinkMI.RadarhandbookM.NewYork:McGraw-Hill，19902、期刊著录格式序号作者.题名J.刊名，出版年份，卷号（期号）：起止页码例:李旭东，宗光华，毕树生，等.生物工程微操作机器人视觉系统的研究J.北京航空航天大学学报，2002，28（3）：249252LiXudong，ZongGuanghua，BiShusheng，etal.Researchonglobalvisionsystemforbioengineering-orientedmicromanipulationrobotsystemJ.JournalofBe