文本讲义讲稿lk1948-tetsma

1、17.06.2014 (No Brand)Comments for TETSMA-182(ZS140442)_6-8 mold drawing of 32511003101_NB_RingRemarks No. 1Please male 2D mold drawingmarked the Part Name and Revision under the isometric viewPlease approved or remark DONEwe didnt get the 2D17.06.2014 (No Brand)Comments for TETSMA-182(ZS140442)_6-8

2、mold drawing of 32511003101_NB_RingRemarks No. 2Add chamfer in all outside coroners of the platesPlease approved or remark DONEWasnt done17.06.2014 (No Brand)Comments for TETSMA-182(ZS140442)_6-8 mold drawing of 32511003101_NB_RingRemarks No. 3Open the slot all along the platePlease approved or rema

3、rk DONEWasnt done马模槽要啦通17.06.2014 (No Brand)Comments for TETSMA-182(ZS140442)_6-8 mold drawing of 32511003101_NB_RingRemarks No. 4Need to connect with screws form the side and to add baffler in the inserts Please approved or remark 不改17.06.2014 (No Brand)Comments for TETSMA-182(ZS140442)_6-8 mold dr

4、awing of 32511003101_NB_RingRemarks No. 5If possible make only 1 banana gate for every part on the center Please approved or remark 不改02.06.2014 (No Brand)Comments for TETSMA-182(ZS140442)_5-29 mold drawing of 32511003101_NB_RingRemarks No. 21Use ” BSPT thread for the water plugsMake the pocket for

5、the water plug with 30 mm diameter and 30 mm depthPay attention that we are using now this type of connectorsPlease approved or remark DONE水接头规格02.06.2014 (No Brand)Comments for TETSMA-182(ZS140442)_5-29 mold drawing of 32511003101_NB_RingRemarks No. 22O-ring should be VITON O-RINGO-ring pocket need

6、 to be done according HASCO standard (see enclose PDF)O-ring size need to be done according HASCO standard (see enclose PDF)Please approved or remark DONE02.06.2014 (No Brand)Comments for TETSMA-182(ZS140442)_5-29 mold drawing of 32511003101_NB_RingRemarks No. 23Make 2D with full part list and defin

7、e the steel type and hardnessmold base, core and cavity main inserts, core and cavity sub inserts, slide base, slide inserts, pistons, wear plates, slide rails ( guiding blocks), slide retainer, angle pins, guide pins and bushings, spru bushing , parallel locks, EJP, jiggle bars / lifter, jiggle bars / lifter guiding, jiggle bars / lifter base, O-rin