日常使用AT命令小结

1、1ATD：主叫拨号提示，初始化电话连接，可以是语音和数据连接10:51:27:725 2015/11/18, MOD_NIL, , TRACE_INFO, IMSP_AT_I s31AT2AT+EVVS：通知协议层语音状态改变(voice status changed to protocol stack )0 开始 1 停止TRACE_INFO, IMSP_AT_I s31AT+EVVS=03AT+EAPPROVE :FDN check and emergency number approved. 号码的合法性(1 是允许 0 不允许)和是否紧急号码( 0 不是 1

2、是)IMSP_AT_I s31AT+EAPPROVE=MSP_AT_R s31+EAPPROVE: 1，,04，AT+ECPI:开启或关闭电话进程信息(to enable/disable call progress information )AT_U p17, s8+ECPI: 1,130,0,0,0,0129,AT_U p17, s8+ECPI: 1,3,0,0,0,0129,AT_U p17, s8+ECPI: 1,4,0,1,0,0129,AT_U p17, s8+ECPI: 1,2,

3、1,1,0,0129,AT_U p17, s8+ECPI: 1,132,1,1,255,255,AT_U p17, s8+ECPI: 1,6,0,1,0,0129,AT_U p17, s8+ECPI: 1,1,0,0,255,255,16AT_U p17, s8+ECPI: 1,129,0,0,255,255,0AT_U p17, s8+ECPI: 1,133,0,0,0,0129,NOTE+ECPI:/ / , , , ,number，, /LTypeShort nameParameter/commentinteg

4、erCa 迤dxJCall id for this callintegermsg_typeCLCC_MT_CALLb1CSMCC_DI SCONNECT_MSG2CSMCC_ALERT_MSG3CSMCC_CALL_PROCESS_MSG4CSMCC_3YNC_MSG5CSMCC_PROGRESS_MSG6CSMCC_CALL_CONNECTED_MSG129CSMCC_ALL_CALLS_DISC_MSG130CSMCC_CALL_1D_ASSIGN_MSG131CSMCC_STATE_CHANGE_HELD132CSMCC_STATE_CHANGE_ACTIVE133CSMCC_STATE

5、_CHANGE_DISCONNECTED134CSMCC_STATE_CHANGE_MO_DISCONNECTINGintegerisjbt0No in band tone1In band tone assignedintegeris_tch(JNo TCH assigned1TCH assignedintegerdir0CLCC_MO_CALL1CLCC_MThCALLintegercall_mode0CLCC VOICE_CALL1CLCC_DATA_CALL .3CLCC_VFD_VOICE4CLCC_AVD_VOICEbCLCC AVF_VOICE6CLCC_VFD_DATACLCC_

6、AVD_DATAstringNumberCalling/calied numberintegerType145International call129 .National callStringPauP-Asserted-URIIntegerdisjcausesee Design Note5: AT+CLCC:List current calls,返回当前电话状态，拨号和振铃转变，承载类型AT_R p19, s10+CLCC: 1,0,2,0,0129AT_I p19, s10AT+CLCCAT_R p19, s10+CLCC: 1,0,2,0,0,185100013

7、23,129AT_I p19, s10AT+CLCCAT_R p19, s10+CLCC: 1,0,3,0,0129AT_I p19, s10AT+CLCCAT_R p19, s10+CLCC: 1,0,0,0,0129AT_I p19, s10AT+CLCCAT_R p19, s10+CLCC: 1,0,0,0,01296 AT+ECSQ:接收信号水平(received signal level indication )AT_U p17, s8+ECSQ: 46,29,1,-298,-40,1,1,2AT_U p1

8、7, s8+ECSQ: 49,37,1,-287,-23,1,1,2AT_U p17, s8+ECSQ: 49,37,1,-285,-24,1,1,2AT_U p17, s8+ECSQ: 54,41,1,-268,-16,1,1,2AT_R p18, s9+ECSQ: 57,40,1,-256,-17,1,1,2AT_U p17, s8+ECSQ: 18,40,1,1,1,-44,-403,7AT_U p17, s8+ECSQ: 18,41,1,1,1,-44,-398,7AT_U p17, s8+ECSQ: 18,41,1,1,1,-43,-400,7AT_U p17, s8+ECSQ: 1

9、8,40,1,1,1,-43,-402,7AT_U p17, s8+ECSQ: 18,39,1,1,1,-44,-405,7AT_U p17, s8+ECSQ: 17,40,1,1,1,-46,-404,7ERROR+ECSQ?+ECSQ: +ECSQ二？+ECSQ; (0,1)+ECSQ+ECSQ:r r rssi_in_qdfcm), , r r FieldTypeShort nameParameter/commentintegerflag0Received signal level indication disable1 AReceived signal level indication

10、 enable/ 2Received signal level indication enable with low frequency.(10% campaxed to flag=l)integersigl.0-63This field is the same as in +CESQ when camp on GSM service. (255 means invalid value)0-96This field is the same as in +CESQ when camp on UMTS service. (255 means invalid value)0-97This field

11、 is the Scinie as in +CESQ when camp on LTE service. (255 means invalid value)Integer0-7This field is the same as in +CESQ when camp on GSM service. (99 means invalid value)0-49This field is the same as in +CESQ when camp on UMTS service. (255 means invalid value)0-34This field is the same as in +CE

12、SQ when camp on LTE service. (255 means invalid7 AT+CREG:网络注册(Network Registration )可看LAC， CI,网络状态，脱网分析时可以使用。AT_R p18, s9+CREG: 3,1,262E,0648D51F,7,0,0 AT_U p17, s8+CREG: 1,A5D6,01A01537,2,0,0 AT_I p18, s9AT+CREG?AT_R p18, s9+CREG: 3,1,A5D6,01A01537,2,0,0 AT_I p18, s9AT+CREG?AT_R p18, s9+CREG: 3,1,A

13、5D6,01A01537,2,0,0 AT_I p18, s9AT+CREG?AT_R p18, s9+CREG: 3,1,A5D6,01A01537,2,0,0AT_I p18, s9AT+CREG=1AT_I p18, s9AT+CREG=3AT_U p17, s8+CREG: 1,A5D6,01A01537,2,0,0AT_I p18, s9AT+CREG?AT_R p18, s9+CREG: 3,1,A5D6,01A01537,2,0,0 AT_U p17, s8+CREG: 1,262E,0648D51F,7,0,0AT_I p18, s9AT+CREG?AT_R p18, s9+C

14、REG: 3,1,262E,0648D51F,7,0,0AT_I p18, s9AT+CREG?CommandPossible re$pon$e($)+CREG=+CREG?+CREG:r tf r J Ja+CME ERROR: +CREG=?+CREG: (list of supported s)5.23 Field:0disable network registration unsolicited result codeenable network registration unsolicited result code +CREG: enable network registratio

15、n and location information unsolicited result code *CREG: ff4enable netowrk registration, location inforamtion and cause value information unsolic什cd result code+CREG: Llaof4J,:0 not registered, MT is not currently searching a new operator to register toregistered, home networknot registered, but MT

16、 is currently searching a new operator to register toregistration deniedunknownregistered, roamingregistered for SMS only*1, home network (applicable only when indicatesEUTRAN) regisxered for SM5 only-, roaming (applicable only when Indicates E- UTRAN)attadied for emergency bearer services only (see

17、 NOTE 2) (not applicable)registered for ,CSFB not preferred*, home network (applicable only when indicates E UTRAN)8 AT+CGREGGPRS network registration status（ps注册状态）DescriptionThe set command controls the presentation of an unsolicited result code +CGREG: when =l and there is a change in the MTsGPRS

18、 network registration status, or code +CGREG: (/r when =2 and there is a change of the network cell. The value =3 further extends the unsolicited result code with ,/, wnen available, when the value of changes.The read command returns the status of result code presentation and an integer which shows

19、whether the network has currently indicated the registration of the MT. Location information elements , and are returned only when =2 and MT is registered in the network. The parameters cause-typecreject-causoL if available, are returned when =3.FormatCommandPossible response(s)+CGREG=+CGREG?+CGREG:

20、rr 130, r r r/7.14J Field:0disable network registration unsolicited result codeenable network registration unsolicited result code ,CGREG: enable network registration and location information unsolicited result code +CGREG: ,J,FMediaTek Confidential Revision 3.1.25 Mar 15 2015Page: 196 of 4082004 20

21、15 MeiaTek heThe nfocmabon oontared n this document can be modrfd without noteAT Document Moden Confidential 1enable network registration, location information and GMM cause value information unsolicited result code+CGREG: 4/r,/9AT+COPS:运营商选择(operator selection )AT_R p18, s9+COPS: 0,2,46001,7AT_I p1

22、8, s9AT+COPS?AT_R p18, s9+COPS: 0,2,46001,2AT_I p18, s9AT+COPS?AT_R p18, s9+COPS: 0,2,46001,2AT_I p18, s9AT+COPS?AT_R p18, s9+COPS: 0,2,46001,2AT_I p18, s9AT+COPS?AT_R p18, s9+COPS: 0,2,46001,2AT_I p18, s9AT+COPS?AT_R p18, s9+COPS: 0,2,46001,2AT_I p18, s9AT+COPS?AT_R p18, s9+COPS: 0,2,46001,2AT_I p1

23、8, s9AT+COPS?AT_R p18, s9+COPS: 0,2,46001,2AT_I p18, s9AT+COPS?AT_R p18, s9+COPS: 0,2,46001,710AT+CHLD=1，1call related supplementary services )11ATA：被叫应答，接听发起连接进入电话131589, 110006, 95330, 10:51:33:360 2015/11/18, MOD_NIL, , TRACE_INFO, AT_I p19, s10ATA短信AT命令12AT+CGCONTRD： Ppdp 上下文动态参数(pdp context dyn

24、amic parameter )AT_I p16, s5AT+CGCONTRDPAT_Rp16,s5+CGCONTRDP:0,5,3gnet.MNC001.MCC460.GPRS,210.21.4.130,221.5.88.8 8,0AT_Ip16,s5AT+CGCONTRDPAT_Rp16,s5+CGCONTRDP:0,5,3gnet.MNC001.MCC460.GPRS,210.21.4.130,221.5.88.88,0AT+EDSS设定数据服务状态(setting data service status )AT+EDSS=0/1(0是关闭，1 是开启 )AT+CGACT,PDP激活,去

25、激活AT_I p16, s5AT+CGACT=0,0AT_I p16, s5AT+CGACT?AT_R p16, s5+CGACT: 0, 1AT_R p16, s5+CGACT: 1, 0AT_R p16, s5+CGACT: 2, 0AT_R p16, s5+CGACT: 3, 0AT_R p16, s5+CGACT: 4, 0AT_R p16, s5+CGACT: 5, 0AT_R p16, s5+CGACT: 6, 0AT_R p16, s5+CGACT: 7, 0AT_R p16, s5+CGACT: 8, 0AT_R p16, s5+CGACT: 9, 0AT_R p16, s5+

26、CGACT: 10, 0AT+PSBEARER ：分组数据交换能力(query packet switching data service capability )Tntg ercel l_dAn_9prd_ supportCorrespodmq enumeration defined as bellowrypedef enum (L4CjrONE_SPECiriEE - OxCOOD, L4C_G?RS SUPPORT = OxOOCl, L4C_EE3E_SUF?ORT = OxOOC2r L4 C_UHTS_SUE PORT = OxOOC4r L4 C_HS DPA_SUPPORT =

27、 DxOCOS, L4C_ESUPA_SVPPORT - DxOClO, L4C_ESrPA_UPA_SUPECRT = OxD01Sr L4C_HSDPAP_SUPPORT = 0 x0020 r T4C_HSnPAP_UPA_SUPPORT = 0 x0030, L4C_HSUPAP_SUPPORT - 0 x0040, L4JHSUPAPJDPA_SUPPORT = UxUU48, L4JHSRAP_SUPPORT = 0 x0060, L4C_DC_DPA_SUPPORT = 0 x0088, L4C DC DPA UFA SUPPORT - 0 x0098, JL4C DC HSDP

28、AP SUPPORT = OxOOaO, L4C_DC_HSDPAP_UPASUPPORT = OxOObO, L4C_DC_HSUPAP_DPA_SUPPORT = 0 x00c8/ L4C_DC_HSPAT_SUPPORT - OxOOcO, L4C LTE SUPPORT - 0 x1000, L4C_HOT_CHANGE - 0 xf)Znte-9 exmax daCa Lvolu二 capabilityCorxespoding enumeration defined as bellowTypedef num (L4jmwE_入 crrvziE = or L4C_GPRS_CAPAB

29、TLTTY, L4C EDGE CAPABILITY,L4C_UMTS_CAPAB ILITf, l4c_H5DPA_capab工L工1Y, /mac-hs L4C H5UPA CA?ABiijirxf /mac-e/es L*C HSDPA H5u?A CAPABILITY, Z/mac-hs + HaC-e/es MB4MBL4C_HSDPAE_CAPADILITY z/mac-chsL4C_IISDPAP_UPAl_CAPADILITYr /mac-ehs mac-e/esL4C_HSUPAT_CAPABILITY,/mac-i/isL4C_HSOPAP_DPA_CAPABILITYr

30、/mac-hs 4- mao-i/isL4C_HSPAP_CAPABILITY,/mao-ehs + mao-i/isLiC_DC-DPZCAPABILITY,/(DC) mao-hL4C_DC_DPA_nPA_CAPABTLTTYr /(DC) mao-h nac-e/es UC_DC_HSDPAP_CAPABTLITYZ / (DC) mac-ehsL4C_DC_HSDPAP_UPA_CAPABILITY,/ (DC) mac-ehs + mac-e/es L4C_DC_HSUPAP_DPA_CAPABILITY. /(DC) nac-hs + mac-i/is L4C_DC_HSRAP_

31、CAPABLLE, /(DC) mac-ehs + mac-i/is L4C_JLTK_CAPAB1L1TY, 13AT+ESIMS：查看SIM 卡状态与开关SIM 卡两张sim 卡正常识别：AT_R p22, s14+ESIMS: 1AT_R p17, s8+ESIMS: 114AT+ERA：T得到RAT状态和gprs/edge 状态，设置RAT模式上层设置两张sim 卡模式AT_I p20, s11AT+ERAT=6,4AT_I p20, s11AT+ERAT=6,4AT_I p20, s11AT+ERAT=6,4AT_I p25, s17AT+ERAT=0,0AT_I p25, s17A

32、T+ERAT=0,0AT_I p20, s11AT+ERAT=6,45.34.2 FormatCommandPossible Response(s)+ERAT?+ERAT : / GPRS status,/+ERAT=# OK/ERROR J15AT+CPIN:entre pin 进入 pinpin 码解锁完成，终端正常注册AT_I p25, s17AT+CPIN?AT_R p25, s17+CPIN: READYAT_I p20, s11AT+CPIN=12345678AT_I p20, s11AT+CPIN?AT_I p20, s11AT+CPIN?AT_R p20, s11+CPIN:

33、READY16AT+CGATTPS ATTACH AND DETAC（ HPS域附着与去附着）17 AT+EGTYPEGPRS connect type+EGTYPE=?FieldEGTYPE： (0-3)TypeShortNameParameter / CommentIntegerGjtype0Set GPRS type to WHEN_NEEDED mode.1Set GPRS type to ALWAYS attach and trigger ATTACH procedure if mode is changed. The GPRS connection type saved in NVRAM will also be changed to always attach.2Set GPRS type to alv/ays attach, but dont trigger ATTACH procedure.The GPRS connection type in NVRAM will not be changed.3The same as type 2. In addition, set FOP f