交换机配置命令三：接口基础配置、vlan测试卷及答案

交换机配置命令三：接口基础配置、vlan测试卷及答案请用完整的命令作答：[矩阵文本题]*姓名：________________________学号：________________________1.（填空）[SWA]________//进入GE0/0/1接口[填空题]*空1答案:interfaceGigabitEthernet0/0/1

2.（填空）[SWA-GigabitEthernet0/0/1]________//接口描述：连接SWB的GE0/0/1[填空题]*空1答案:descriptionTo_SWB_GE0/0/1

3.（填空）[SWA-GigabitEthernet0/0/1]________//关闭接口自协商[填空题]*空1答案:undonegotiationauto

4.（填空）[SWA-GigabitEthernet0/0/1]________//设置全双工[填空题]*空1答案:duplexfull

5.（填空）[SWA-GigabitEthernet0/0/1]________//设置速率1000Mbps[填空题]*空1答案:speed1000

6.（填空）[SWA]________//查看MAC地址表[填空题]*空1答案:displaymac-address

7.（填空）[SWB]________//创建VLAN10[填空题]*空1答案:vlan10

8.（填空）[SWB-vlan10]________//描述VLAN10为Marketing[填空题]*空1答案:descriptionMarketing

9.（填空）[SWB]________//创建临时端口组，成员为Eth0/0/10-15[填空题]*空1答案:port-groupgroup-memberEthernet0/0/10toEthernet0/0/15

10.（填空）[SWB-port-group]________//若为Trunk口，先取消允许所有VLAN，才能改Access[填空题]*空1答案:undoporttrunkallow-passvlanall

11.（填空）[SWB-port-group]________//端口类型设为Access[填空题]*空1答案:portlink-typeaccess

12.（填空）[SWB-port-group]________//端口加入VLAN20；[填空题]*空1答案:portdefaultvlan20

13.（填空）[SWA]________//进入GE0/0/24接口[填空题]*空1答案:interfaceGigabitEthernet0/0/24

14.（填空）[SWA-port-group]________//若为Access口，先删除默认VLAN才能改Trunk；此处提示符应为接口视图[填空题]*空1答案:undoportdefaultvlan

15.（填空）[SWA-GigabitEthernet0/0/24]________//端口类型设为Trunk[填空题]*空1答案:portlink-typetrunk

16.（填空）[SWA-GigabitEthernet0/0/24]________//允许所有VLAN通过[填空题]*空1答案:porttrunkallow-passvlanall

17.（填空）[SWA]________//查看VLAN信息；Untagged对应Access，Tagged对应Trunk/Hybrid[填空题]*空1答案:displayvlan

18.（填空）[SWA]________//查看接口的VLAN类型与PVID[填空题]*空1答案:displayp