真空泵标准汇总

1、真空泵标准汇总 标准编号 标准中文名称 标准英文名称 GB/T13930-1992 水环真空泵和水环压缩 Methods for the measurement of volume flow 机气量测定方法 of gas ofwater-ring vacuum pump and compressor GB/T13929-1992 水环真空泵和水环压缩 Methods of testing for water-ring vacuum pumps 机试验方法 and compressors JB/T5971-1992(2005复审) 单级多旋片式真空泵 JB/T7266-1994 容积真空泵 性能

2、测量方法 JB/T7255-1994(2005复审) 水环真空泵和水环压缩机 JB/T8472.1-1996 蒸汽流真空泵性能测定 第一部分:抽气速率(体积流率)的测定 JB/T8472.2-1996 蒸汽流真空泵性能测定 第二部分:临界前级压力的测定 JB/T1246-1997 滑阀真空泵 JB/T9808.1-1999 奶用真空泵 技术条件 JB/T9808.2-1999 奶用真空泵 试验方法 JB/T8106-1999 容积真空泵噪声测量方法 JB/T8944-1999 单级旋片真空泵 JB/T8107-1999 容积真空泵振动测量方法 JB/T10134-1999 带真空泵交流发电机

3、技术条件 JB/T53019-1999 油扩散真空泵 产品质量分等 JB/T53022-1999 滑阀真空泵 产品质量分等 JB/T53014-1999 单级多旋片真空泵 产品质量分等 JB/T53018-1999 罗茨真空泵 产品质量分等 JB/T53017-1999 旋片真空泵 产品质量分等 JB/T53016-1999 往复真空泵 产品质量分等 JB/T53299-1999 单级水环真空泵 产品质量分等 JB/T53020-1999 油扩散喷射真空泵 产品质量分等 JB/T53301-1999 两级水环真空泵 产品质量分等 NF E51-291-1996 压缩机和真空泵.安全要求.第 (

4、Compressors and vacuum pumps. Safety requirements 2部分:真空泵 . Part 2 : vacuum pumps.) NF E51-290-1996 压缩机和真空泵.安全要求. (Compressors and vacuum pumps. Safety requirements 第1部分:压缩机 . Part 1 : compressors.) NF X10-501-1976 真空技术.词汇.真空泵 (Vacuum technology. Vocabulary. Vacuum pumps.) ANSI/ASME PTC 9-1974 性能试验规

5、范.容积式 压缩机、真空泵和鼓风机 (Performance Test Code - Displacement Compressors, Vacuum Pumps and Blowers) ANSI/UL 1450-2003 电动空气压缩机、真空 (Motor-Operated Air Compressors, Vacuum 泵和涂漆设备 Pumps, and Painting Equipment ) ASME PTC 9 Erratum-1972 容积式压缩机, (Displacement compressors, vacuum pumps, 真空泵和鼓风机.正误表 and blowers;

6、 Erratum) ASME PTC 9-1970 容积式压缩机,真空泵 (Displacement compressors, vacuum pumps, and blowers) 和鼓风机 BS EN 1012-1-1997 压缩机和真空泵.安全 (Compressors and vacuum pumps - Safety 要求.压缩机 requirements - Compressors) BS EN ISO 14847-1999 转式变容真空泵. (Rotary positive displacement pumps - 技术要求 Technical requirements) BS E

7、N 1012-2-1997 压缩机和真空泵.安 (Compressors and vacuum pumps - Safety requirements 全要求.真空泵 - Vacuum pumps) EN 1012-1-1996 压缩机和真空泵 安全 Compressors and vacuum pumps - Safety 要求 第1部分：压缩机 requirements - Part 1: Compressors EN 1012-2-1996 压缩机和真空泵 安全要 Compressors and vacuum pumps - Safety 求 第2部分：真空泵 requirements

8、- Part 2: Vacuum pumps DIN EN 1012-1-1996 压缩机和真空泵.安全 (Compressors and vacuum pumps, safety requirements - 要求.第1部分:压缩机 Part 1: Compressors; German version EN 1012-1:1996) DIN EN 1012-2-1996 压缩机和真空泵.安全 (Compressors and vacuum pumps, safety requirements 要求.第2部分:真空泵 - Part 2: Vacuum pumps; German versio

9、n EN 1012-2:1996) DIN 28432-1996 真空技术.膜片真空泵 (Vacuum technology - Acceptance specifications 的验收规则 for diaphragm vacuum pumps) DIN 45635-13-1977 机器噪声测量.空气载 (Measurement of airborne noise emitted by 声测量.包面法.空气压缩 machines; enveloping surface method, 机包括真空泵（活塞式. compressors, vacuum pumps included (displa

10、cement-, 涡轮式和喷射式压缩机） turbo- and jet compressors) DIN 28426-2-1976 真空技术.旋转活塞真 (Vacuum technology; acceptance specifications 空泵的验收规则.高真空 for roots vacuum pumps for the range of medium vacuum) 范围内的摇杆式活塞真空泵DIN 28400-2-1980 真空技术.名称和定义.真空泵 (Vacuum technology; terms and definitions, vacuum pumps) DIN ISO 3

11、019-3-1984 液压传动.变容真空泵和 (Hydraulik fluid power; positive displacement 马达.装配法兰盘和轴端的尺寸 pumps and motors; dimensions and identification 及识别代码.第3部分:多边形法 code for mounting flanges and shaft ends; part 兰盘(包括圆形法兰盘) 3: polygonal flanges (including circular flanges) DIN ISO 3019-2-1991 液压传动.变容真空泵和 (Hydraulic

12、fluid power; positive displacement 马达.装配法兰盘和轴端的尺寸 pumps and motors; dimensions and identification 及识别代码.第2部分:两孔与四 code for mounting flanges and shaft ends; 孔法兰与轴端.米制系列 part 2: 2 and 4-hole flanges and shaft ends, metric series; identical with ISO 3019-2:1986) DIN 28426-1-1983 真空技术.旋转真空泵.在近 (Vacuum t

13、echnology; acceptance specifications 似真空和高真空范围内的闭塞 for rotary plunger vacuum pumps, sliding vane 阀真空泵和旋转阀真空泵的验 rotary vacuum pumps and rotary piston vacuum 收规则 pumps for the ranges of rough and medium vacuum) DIN 28431-1987 真空技术.液体环式真空泵的 (Vacuum technology; acceptance specifications 验收规程 for liquid

14、ring vacuum pumps) DIN 28427-1983 真空技术.蒸气压低于1mbar的 (Vacuum technology; acceptance specifications for 扩散泵和蒸气喷射真空泵的验 diffusions pumps and vapour jet vacuum pumps 收规则 for vapour pressures of the pump fluid 1 mbar) DIN 28430-1984 真空技术.以蒸汽作为驱动介 (Vacuum technology; rules for the measurement 质的蒸汽喷射真空泵和蒸汽 o

15、f steam jet vacuum pumps and steam jet 喷射压缩机用测量规则 compressors using steam as the working fluid) JB/T6921-2004 罗茨真空泵机组 JB/T8540-2004 水蒸汽喷射真空泵 JB/T10462-2004 水喷射真空泵 JB/T7265-2004 蒸汽流真空泵 UL 1450-2003 电动空气压缩机、真空泵和喷 (Motor-operated air compressors, vacuum pumps 漆设备 , and painting equipment) JIS B8384-200

16、0 液压.变容真空泵、机动泵 (Hydraulic fluid power - Positive displacement 和整体传动装置.稳态性能测定 pumps, motors and integral transmissions - Determination of steady-state performance) JIS B8317-2-1999 蒸气真空泵.性能特性的 测定.第2部分:临界后压力的测定 (Vapour vacuum pumps -Measurement of performance characteristics - Part 2: Measurement of c

17、ritical backing pressure) JIS B8323-2003 水封式真空泵 (Water ring vacuum pumps) JIS B8317-1-1999 蒸气真空泵.性能特性的测定 (Vapour vacuum pumps - Measurement of performance .第1部分:流量容积比率的测定(泵速) characteristics - Part 1: Measurement of volume rate of flow (pumping speed) JIS B8385-2000 液压.变容真空泵、机动泵和整 (Hydraulic fluid p

18、ower - Pumps, motors and integral 体传动装置.参数定义和字母符号 transmission - Parameter definitions and letter symbols) JIS Z8126-2-1999 真空技术.词汇.第2部分:真 (Vacuum technology - Vocabulary - Part 2: 空泵和相关条款 Vacuum pumps and related terms) ISO 1607-2-1989 变容真空泵.性能特性测量. (Positive-displacement vacuum pumps; measurem 第2部

19、分:极限压力的测量 ent of performance characteristics; part 2: measurement of ultimate pressure) ISO 16330-2003 往复式变容真空泵和泵装置 (Reciprocating positive displacement pumps and .技术要求 pump units - Technical requirements) ISO 3529-2-1981 真空技术.词汇.第2部分: (Vacuum technology; Vocabulary; Part 2 : Vacuum 真空泵和有关术语.三种语言版 pumps and related terms Trilingual edition) ISO 1608-2-1989 蒸汽真空泵.性能特性的测 (Vapour