资源目录
压缩包内文档预览:
编号:91265003
类型:共享资源
大小:1.13MB
格式:ZIP
上传时间:2020-08-04
上传人:QQ24****1780
认证信息
个人认证
王**(实名认证)
浙江
IP属地:浙江
50
积分
- 关 键 词:
-
卧式
钢筋
切断
设计
- 资源描述:
-
卧式钢筋切断机的设计,卧式,钢筋,切断,设计
- 内容简介:
-
河 北 科 技 大 学毕业设计说明书(论文)学生姓名: 闫立业 学 号: 020501120 学 院: 机械电子工程学院 专 业: 机械设计制造及其自动化 题 目: 卧式钢筋切断机的设计 指导教师: 雒运强(副教授) 评阅教师: 付其凤(副教授) 2006年6月 毕业设计说明书(论文)中文摘要本课题设计建筑上的卧式钢筋切断机的工作原理是:采用电动机经一级三角带传动和二级齿轮传动减速后,带动曲轴旋转,曲轴推动连杆使滑块和动刀片在机座的滑道中作往复直线运动,使活动刀片和固定刀片相错而切断钢筋。根据电机的工作环境选择电动机类型,采用卧式安装,防护式电机,鼠笼式三相异步电动机。选择三级减速,先是一级带减速,再两级齿轮减速。一级带传动,它具有缓冲、吸振、运行平稳、噪声小、合过载保护等优点,并安装张紧轮。两级齿轮减速,齿轮传动可用来传递空间任意两轴间的运动和动力,并具有功率范围大,传动效率高,传动比准确,使用寿命长,工作安全可靠等特点。动力由电动机输出,通过减速系统传动,把动力输入到执行机构。由于传动系统作 的是回转运动,而钢筋切断机的执行机构需要的直线往复运动,为了实现这种转换,可以采用曲柄滑块机构,盘行凸轮移动滚子从动件机构,齿轮齿条机构。本课题采用曲柄滑块机构作为本机械的执行机构。关键词 切断 建筑 钢筋 齿轮 曲柄滑块毕业设计说明书(论文)外文摘要Title lie type steel cutting machinesdesigning AbstractThis article introduces a kind of architectural lie type steel cutting machines. Its operating principles are: It use electric motors level triangle belt transmission and secondary gear transmission to slowdown. Then, it drives the crank rotate, The crank connected to slide block and moving blades in the slippery way make the back and forth straight line sport, makes the moving blades and the fixed blade shear and cut steel. According to the working environment choice the type of electric motors, using horizontal installation, protection of the electrical, squirrel-cage three-phase asynchronous motor. Option three slowdown,first level belt slowdown, followed by the secondary gear deceleration. First level with the introduction of automated, because it has a buffer, absorb shock and operate smoothly, small noise, and can protect the over loading. Then introduce a secondary gear deceleration slowdown, because gear transmission can be used to transmit arbitrary space between the two axis movement and momentum, and the scope of power, transmission efficient transmission accurately, long using life, such as safe and reliable character. Power output by electric motors through slow down transmission system to import power to the executive body. As the system make rotation movement, The steel cutting machine needs the back and forth straight line sport ,in order to achieve this transformation, we can use c slider-crank institutions or gear and rack. I decided to consider realistic conditions using
- 温馨提示:
1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
人人文库网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。