版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
1、CH 3,TRANSPORTATION INFRASTRUCTURE,CHAPTER OUTLINE,KEY TERMS:,cul-de-sacs 尽端路: a dead-end street customhouse 海关: a building housing the offices for the government officials who processed the paperwork for the import and export of goods into and out of a country.,TEU-Twenty-foot Equivalent Unit 二十英尺标
2、准箱: be defined as a volume equivalent to that occupied by one ISO twenty-foot container. A common measure of freight volume is 2TEU, which is the volume occupied by one ISO forty-foot container.,TCD-traffic control device 交通控制设施: be defined as all signs, signals, markings, and other devices used tor
3、egulate, warn, or guide road users, placed on, over, or adjacent to a street, highway, pedestrian facility, or bikeway by authority of a public body or official having jurisdiction.,SPECIAL WORDS:,sewer 下水道 multilane 多车道的 high-capacity 大容量的 progressively 日益增多地 two-lane 双车道 free-flow 自由流的 access 入口 e
4、gress 出口 ramp 斜坡,坡道,median strip 隔离带 terrain 地形 volume-to-capacity ratio 容量能力比 pc/mi/ln-passenger cars per mile per lane 车辆密度单位:车辆数/每公里/每车道 curvature 弯曲,曲率 Intersection 交叉口 ASSHTO-American Association of State Highway and Transportation Officials 美国国家公路与运输协会标准,Roundabout 道路交叉处的环形路, 迂回路线 safe stoppin
5、g distance安全停车距离 subgrade 路基 Ballast 道床 tie 枕木 rail fastening 钢轨扣件 spike 道钉 railage 铁路运输, 铁路运费 control tower 控制塔 hangar 机棚 nonsked 不定期,tarmac 停机坪 Airfield 飞机场 Dock 码头,船坞 Dredge n.挖泥机, 挖泥船, 捞网; v.挖掘, 疏浚, 捞取 Jetty 防波堤,码头 Breakwater 防浪堤, 挡浪板, 挡水板 Pier 码头, (桥)墩 Lighthouse 灯塔,Lightship 灯塔船 Buoy 浮标,浮筒 fir
6、st-come, first-served 先到先服务 Traffic marking 交通标线 Traffic sign 交通标志 Traffic signal 交通信号,3.1 HIGHWAY,Highway transportation is the dominant mode in passenger travel and one of the principal freight modes. A highway system ranges from high-capacity, multilane freeways to urban streets to unpaved rural
7、roads.,3.1.1 Highway System,A highway system includes the intercity routes, a network of roads, which are classified as rural or urban and as arterials or collectors.,Urban roads are located in cities, and they serve areas of high-density land development.,Rural roads arc located outside of cities a
8、nd serve as links between population centers.,Arterial roads are intended to serve travel between areas and provide improved mobility,which have higher speeds and capacities,Collector roads and minor arterials serve a dual purpose of mobility and access.,A typical highway trip begins on a local road
9、 and continues on to a collector and then to a major arterial. The interstate highway system, connects major metropolitan areas and industrial centers by direct routes, connects the highway system with major roads, and provides a dependable highway network to serve in national emergencies.,(1) Trave
10、l Movements in A Typical Trip,Up to six distinct travel movements may be present in a typical trip: Main movement Transition Distribution Collection Access Termination,Hierarchy,Figure1.5 Hierarchy of Movement,(2) Trip Functions and Roadways Design,The hierarchy of trip functions should be matched b
11、y the design of the roadways provided to accomplish them. A typical trip has two terminals: one at the origin one at the destination,at the origin end, the access function provides an opportunity for a trip-maker to enter a vehicle and for the vehicle to enter the roadway system.,At the destination
12、end of the trip, the reverse occurs, with the driver progressively moving toward facilities favoring access until the specific land parcel desired is reached.,Figure 3.1 Highway,There are two primary categories of service provided by roadways and roadway systems, they are: accessibility mobility,ref
13、ers to the direct connection to abutting lands and land uses provided by roadways,refers to the through movement of people, goods, and vehicles from Point A to Point B in the system,3.1.2 Highway Definition,Two-lane Highway,A two-lane highway is an undivided highway with two lanes, one for use by tr
14、affic in each direction of travel. One or more of the following alleviation techniques may be applied to reduce problems on two-lane highways: Realignment to improve passing sight distance Use of paved shoulders Use of passing lanes at intervals in each direction Three-lane roadways with two lanes d
15、esignated for travel in one direction,Multilane Highway,12-ft lane widths A minimum of 12 ft of total lateral clearance in the direction of travel. Clearances are measured from the edge of the traveled lanes and of 6 ft or greater are considered to be equal to 6 ft.,No direct access points along the
16、 highway A divided highway Only passenger cars in the traffic stream A free-flow speed of 60 mph or more Driver population consisting primarily of commuters,Three main elements define the geometry of a highway section:,Highway design is generally initiated by laying out a set of tangents on topograp
17、hical and development maps of the service area. Some of the more important considerations include:,Forecast demand volumes, with known or projected origin-destination patterns Patterns of development Topography Natural barriers Subsurface conditions,3.1.3 Freeway Definitions,A freeway is a divided h
18、ighway facility having two or more lanes in each direction for the exclusive use of traffic, with full control of access and egress. In the highway hierarchy, the freeway is the only facility that provides completely uninterrupted flow. Freeways are the safest of all roadway types.,(1) Subcomponents
19、 of A Freeway,A freeway consists of three component parts:,Weaving areas, defined as “the crossing of two or more traffic streams traveling in the same general direction along a significant length of highway without the aid of traffic control devices.”,(2) Freeway Capacity,Freeway capacity is the ma
20、ximum sustained (15 minutes) rate of flow in vehicles per hour (veh/hr) at which traffic can pass a point or uniform segment of freeway under prevailing roadway and traffic conditions.,(3) The “Perfect Freeway” for Maximum Flow,A set of ideal conditions exists as the starting point that will provide
21、 for maximum flow. The conditions are as follows:,Lanes at least 12 feet wide Right-shoulder lateral clearance between the edge of the travel lane and the nearest obstacle or object influencing traffic behavior at least 6 feet,Traffic stream consists of passenger cars only Ten or more lanes Intercha
22、nges spaced every 2 miles or more Level terrain, with grades no greater than 2 percent Driver population dominated by regular and familiar users of the facility,(4) Freeway Performance Measures,The service offered by a basic freeway section can be characterized by three performance measures, they ar
23、e:,3.1.4 Highway Classification,All highway systems involve a hierarchal classification by the mix of access and mobility functions provided. There are four major classes of highways that may be identified:,Limited-access facilities Arterials Collectors Local streets,The limited-access facility prov
24、ides for 100% through movement, or mobility.,Arterials are surface facilities that are designed primarily for through movement but permit some access to abutting lands.,Local streets are designed to provide access to abutting land uses with through movement only a minor function, if provided at all.
25、,The collector is an intermediate category between arterials and local streets.,3.1.5 Urban Transport Systems,Urban transport systems are structured in an extremely complex way. The level of infrastructure provided and the way it is managed affects the demand for travel. Demand in turn affects the p
26、erformance of the transportation system.,3.1.6 Interrupted and Uninterrupted flow,Traffic facilities are broadly separated into two principal categories: Uninterrupted flow Interrupted flow,Facilities have no external interruptions to the traffic stream,Facilities incorporate fixed external interrup
27、tions into their design and operation.,The major difference between uninterrupted and interrupted flow facilities is the impact of time.,On uninterrupted facilities, the physical facility is available to drivers and vehicles at all times.,On a given interrupted flow facility, movement is periodicall
28、y barred by “red” signals.,Therefore, interrupted flow is, more complex than uninterrupted flow.,3.1.7 Intersection,An intersection is an area shared by two or more roads. Its main function is to allow the change of route directions.,The intersection is an area of decision for all drivers; each must
29、 select one of the available choices to proceed.,Essentiality of Intersections,Intersections are an inevitable part of any street system. A road or street intersection can be defined as the general area where two or more roads join or cross, including the roadway and roadside facilities for traffic
30、movement within it. An intersection needs to be designed with great care, taking into consideration efficiency, safety, speed, cost of operation, and capacity.,Four basic elements are generally considered in the design of at-grade intersections:,Human factors, such as driving habits and decision and
31、 reaction times,Traffic considerations, such as capacities and turning movements, vehicle speeds, and size and distribution of vehicles,Physical elements, such as characteristics and use of abutting property, sight distance, and geometric features,Economics factors, such as costs and benefits and en
32、ergy consumption,Intersection Channelization,Channelization is the separation or regulation of conflicting traffic movements into definite paths of travel by traffic islands or pavement markings to facilitate the safe and orderly movements of both vehicles and pedestrians.,Some basic principles to h
33、elp design channelized intersections are as follows:,Motorists should be provided with channel lines that are easy to follow Sudden and sharp reverse curves should be avoided Areas of vehicle conflict should be reduced as much as possible,Traffic streams that cross without merging and weaving should
34、 intersect at or near right angles Islands should be carefully selected and be as few as possible Overchannelization should be avoided, as it has proved to be counterproductive,Rotaries and Roundabouts,Rotaries and roundabouts are channelized intersections comprising a central circle surrounded by a
35、 one-way roadway. The basic difference between rotaries and roundabouts is that rotaries are generally signalized (as in Washington, D.C.), whereas Round-abouts are not.,Roundabouts generally have good safety records and traffic does not have to stop when traffic volumes are low.,Uncontrolled Inters
36、ections,Where an intersection has no control device whatsoever, the operator of a vehicle approaching an intersection must be able to perceive a hazard in sufficient time to alter the vehicles speed, as necessary, before reaching the intersection.,There can be potential danger to vehicle operators o
37、n the uncontrolled intersection, especially when a succession of vehicles are approaching the intersection, when time is sufficient to avoid only a single vehicle.,3.2 RAILROAD,Classification of Railroad,According to the size of the trackage along its smaller dimension,standard gauge,narrow gauge,br
38、oad gauge,a railroad track having a width of 56 inches,With a smaller width than the standard one,With a bigger width than the standard one,A monorail, is a single rail serving as a track for wheeled vehicles traveling on it or suspended from it.,A monorail,3.2.2 Overall Track Structure,Figure 3.3 O
39、verall track structure,These are arranged as follows:,the ballast, coarse gravel or crushed rock laid to form a bed for roads or railroads - rests on the subgrade,the ties are embedded in the ballast,the rails usually rest on tie plates and are fastened to the ties by spikes,Major track components i
40、nclude ballast, ties, and rail. Ballast consists of a layer of crushed stone, crushed slag, gravel, or similar material which is placed on top of the subgrade and in which the ties are embedded.,Detailed Railroad Track Structure,superstructure,substructure,3.2.4 Railroad System,Railroad is a system
41、of railroad track, together with the land, stations, rolling stock, and other related property under one management.,Line,Railhead,Crossing,Depot or railway station,platform,Line is a railway track or system of tracks, a particular section of a railway network.,Line,Railhead is the farthest point on
42、 a railroad to which rails have been laid, or a place on a railroad where military supplies are unloaded.,Railhead,Crossing is a place at which roads, lines, or tracks intersect, and the railroad may be crossed.,Crossing,Depot or railway station is considered to be a node of the rail net where loadi
43、ng and unloading of passengers and cargos.,Depot or railway station,A platform is a horizontal surface raised above the level of the adjacent area, a landing alongside railroad tracks at which trains load or unload cargo and passenger.,platform,3.3 AIRPORT,An airport is a tract of leveled land where
44、 aircraft can take off and land, usually equipped with hard-surfaced landing strips, a control tower, hangars, aircraft maintenance and refueling facilities, and accommodations for passengers and cargo.,Figure 3.4 Airport,3.3.1 The Airport System,An air transportation system includes: airport aircra
45、ft airline,airport,air side,ground side,includes terminal airspace, common approach paths for runways, taxiways, and aprons,includes facilities such as terminal buildings, gates, parking facilities, and baggage handling systems,Aircraft,Aircraft is a machine or device, such as an airplane, a helicop
46、ter, a glider, or a dirigible, that is capable of atmospheric flight.,airline,An airline is a system for scheduled air transport of passengers and freight. It is also called air lane, or airway, flight course, a line of flight, a regular route of travel for aircraft, including domestic service, and
47、international service.,3.3.2 Laying out of An Airport,The airport functions as a harbor for aircraft, as a dock for unloading, and as a point of modal connection for the passenger.,Figure 3.5 The airport system based on Ashford, Stanton and Moore,Various Service Vehicles,Aircraft,Runway,Taxiway,Apro
48、n,Apron,Gate Jetway,pier,Departing Curbside,Approach,Airport entry, exit and service Roads,Parking,Roads,Roads,Parking,Airside,Landside,Catering,Mail,Service delivery,Runway,Taxiway,Apron,Apron,Jetway Gate,pier,Arriving Curbside,Departure,Arrival concourse,Departure concourse,Passenger and baggage r
49、e-claim, etc.,Passenger area processing,Other ground transport,Cargo processing,Baggage,Baggage,There are lots of branches at the airport, they are:,Air traffic control system, including control tower, communication, pilot and navigation system. Oil supplying, including oilcan, gas station, putting
50、on steam system, which is usually outside of the airfield. Emergency and succor system, including headquarters, fire protection, and medicine agencies. Power and telecommunication system, including power and water supply, heating, etc.,Safeguard and security system, including monitoring and alarming
51、 establishment. Freight system, warehouse, distributing center. Environment protecting, including flood prevention, sewerage, noise testing and treatment, countercheck of bird and mice disaster. Customer service, such as foodstuff supply, hotel, store, bar, and conference room, etc.,Airfield Design,
52、The layout and design of an airport involves numerous trade-offs, including the effects of altitude, temperature, runway gradient, winds, and aircraft performance.,Engine Noise,Efforts at reduction of noise at the source have focused on jet engine design. Sources of engine noise include the primary
53、jet and machinery noise.,Primary jet noise predominates on takeoff, and is reduced greatly by the introduction of fan jet engines.,Machinery noise has been reduced by acoustical lining of the inlet and ducts for the fan exhaust and removal of inlet guide vanes.,Land Use,An airport consumes considera
54、ble an area. Most of that land will be devoted to runways, taxiways, apron, and restricted areas.,Large open areas are needed between runways and at the ends of the runway to facilitate simultaneous operations.,The terminal buildings and other airport service buildings, consume much less land area t
55、han do the airside activities. Next to the airfield itself, automobile parking is often the largest user of land.,3.3.3 Access to the Airport,The best access routes are those that allow for channelization of traffic to each of the air-lines within the terminals, or to the best parking areas. At some
56、 busy airports, the buses and courtesy vehicles are separated from the taxis and personal vehicles. The access cannot be designed without full knowledge of the various routes that will feed into the airport entrance.,3.4 HARBORS AND PORTS,Water transportation system is consist of sea-route, or river
57、, harbor and Port, and the ship.,Figure 3.6 Harbors and ports,3.4.1 Signification of Harbors,A harbor is any body of water of sufficient depth for ships to enter and find shelter from storms or other natural phenomena. The modern harbor is a place where ships are built, launched, and repaired, as well as a terminal for incoming and outgoing ships.,Definition,There are four principal classes of harbors:,Classification,commercial naval fishery refuge for sm
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 2027年初中九年级英语Unit 1-4写作教学设计与实施策略研究
- 初中生物七年级教学设计:绿色植物光合作用与有机物制造专题复习
- 高一地理教学设计:地球圈层结构的整体性认知与默写小纸条实施策略研究
- 高中英语必修三Unit 6 Writing-撰写安全指南教学设计
- 初中心理健康八年级教学设计:我是最棒的 自信与我同行
- 高中三年级地理产业转移对区域发展的影响复习课教学设计
- 初中七年级美术《画自己》教学设计
- 小学六年级数学教学设计:集合问题核心逻辑与建模策略深度解析
- 初中英语八年级下册Unit 1 Spring is coming 速记与默写教学设计
- 小学二年级生命生态安全《看谁记得快又牢》(记忆有妙法)教学设计
- 2025年(完整版)三级安全教育真题及答案(2025年)
- 中国鼻炎诊疗指南(2026版)
- 2026年译林版九年级英语上册 Unit5 Music speaks单元测试卷(含答案)
- 2026年数据文员笔模拟题目及答案详解
- T/COSHA 48-2024医疗机构安全生产资料管理规范
- GB 48145-2026井工煤矿机电设备完好性要求
- IEC 61000-4-2-2025 中文版(静电放电抗扰度试验 2025 年 3 月发布)
- 2026年党员发展对象培训结业试题及答案
- 2026年邮储银行山西分行秋招无领导小组面试仿真题解析
- 入团考试时事试题及答案解析
- 高中英语北师大版必修第一册全册单词表(按单元编排)
评论
0/150
提交评论