et200et 200l 分布式 io 设备_W

1、SIMATICPreface, Contents12345678ET 200LDistributed I/O DeviceProduct OverviewInstallationManualWiringCommissioningDiagnosticsGeneral Technical DataTerminal Blocks and Supplemen- tary Terminals Technical DataET 200L Electronics Blocks Technical DataA BCOrder NumbersType and Device Master FilesESDGlos

2、sary, IndexEdition 10/2005EWA-4NEB 780600902-05Safety GuidelinesThis manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, no

3、tices referring to property damage only have no safety alert symbol. The notices shown below are graded according to the degree of danger.Dangerindicates that death or severe personal injury will result if proper precautions are not taken. !Warningindicates that death or severe personal injury may r

4、esult if proper precautions are not taken. !Cautionwith a safety alert symbol indicates that minor personal injury can result if proper precautions are not taken. !Cautionwithout a safety alert symbol indicates that property damage can result if proper precautions are not taken.Noticeindicates that

5、an unintended result or situation can occur if the corresponding notice is not taken into account.If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include

6、 a warning relating to property damage.Qualified PersonnelThe device/system may only be set up and used in conjunction with this documentation. Commissioning and operation of a device/system may only be performed by qualified personnel. Within the context of the safety notices in this documentation

7、qualified persons are defined as persons who are authorized to commission, ground and label devices, systems and circuits in accordance with established safety practices and standards.Prescribed UsageNote the following:WarningThis device and its components may only be used for the applications descr

8、ibed in the catalog or the technical description, and only in connection with devices or components from other manufacturers which have been approved or recommended by Siemens.Correct, reliable operation of the product requires proper transport, storage, positioning and assembly as well as careful o

9、peration and maintenance. !TrademarksAll names identified by are registered trademarks of the Siemens AG.The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.Disclaim of LiabilityWe have reviewed the co

10、ntents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in sub- sequent

11、editions.SIEMENS AGAutomation and Drives Postfach 484890437 NRNBERG GERMANYEWA-4NEB 780600902-05 10/2005Copyright Siemens AG 2005 Technical data subject to changePrefacePurpose of the ManualThe information provided in this manual enables you to operate the distrib- uted I/O.Basic knowledge requiredT

12、o understand the manual, you require general experience in the field of au- tomation engineering.Scope of this manualThis manual is applicable to the components of the ET 200L distributed I/O system.This manual contains a description of the components which were valid at the time the manual was publ

13、ished. We reserve the right to issue a Product Information which contains up-to-date information about new components and new versions of components.Changes Since the Previous ManualChanges have been made since the previous version of this manual, order number 6ES7 130-1AA00-8AA0, Release 4, as rega

14、rds the following: Proclamation the ET 200L-SC IM-SC Proclamation the Smart Connect SCGuideThe manuals navigation features outlined below support quick access to spe- cific information:The manual begins with a table of contents and a list of tables. Important terms are explained in the glossary.Navi

15、gate to the most important topics in our documents using the index.Special notesIn addition to this manual, you also need the manual of the DP master you are using.The ET 200L distributed I/O device cann be recycled due to its ecologically compatible equipment. For environmentally compliant recyclin

16、g and disposal of your electronic waste, please contact a company certified for the disposal of electronic waste.Recycling and Dis- posalET 200L Distributed I/O Device EWA-4NEB 780600902-05iiiPrefaceFurther supportIf you have any questions relating to the products described in this manual, and do no

17、t find the answers in this documentation, please contact your Sie- mens partner at our local offices.http:/www.ad.siemens.deThe portal to our technical documentation for the various SIMATIC products and systems is available at:http:/www.siemens.de/simatic-tech-doku-portalThe online catalog and order

18、ing system are available at: Training centerSiemens offers various courses to get you started with the ET 200L distrib- uted I/O and the SIMATIC S7 automation system. Please contact your re- gional Training Center, or the central Training Center in D-90327 Nurem- berg.Phone:

19、 + 49 (911) 895-3200Technical SupportYou can reach technical support for all A&D projectsUsing the Support Request form on the web: http:/www.siemens.de/automation/support-requestPhone: + 49 180 5050 222Fax: + 49 180 5050 223For further information about our technical support, r

20、efer to the Internet at /automation/serviceService & Support on the InternetIn addition to our documentation services, you can also make use of our com- prehensive online knowledge base on the Internet./automation/service&support There you will find:our News

21、letter, which constantly provides you with the latest information about your products.the right documentation for you using our Service & Support search en- gine.the bulletin board, a worldwide knowledge exchange for users and ex- perts.your local contact for Automation & Drives in our contact datab

22、ase.Information about on-site services, repairs, spare parts. Lots more is avail- able on our “Service” pages.ET 200L Distributed I/O Device EWA-4NEB 780600902-05ivContentsPreface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23、. . . .Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii 1-11-21-31-62-.1What Is the ET 200 Distributed I/O System? . . . . . . . . . . . . . . . . . . . . . . . .What Is the ET 200L Distributed I/O Device? . .

24、. . . . . . . . . . . . . . . . . . . . . .What Is the ET 200L Block I/O Device? . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.1Installing the ET 200L TB

25、16L/TB 32L Terminal Block and Supplementary Ter-minal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Installing and Disassembling the ET 200L Electronics Block . . . . . . . . . . .Setting the ET 200L PROFIBUS Address . . . . . . .

26、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .General Rules and Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Configuring the Electrical Install

27、ation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Wiring Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Wiring the ET 200L TB 16L/TB 32L Terminal Block . . . . . . . . . . . . . . . . . .2-22-52-63-13-23-43-82.22.3Wiring3

28、.33-104-14-14-25-15-25-35-44Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.14.2Configuration Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Commissioning the ET 20

29、0L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..15.2.2Diagnostics Using the LEDs . . . . . . . . . . . . . . . . . . . . . . . .

30、 . . . . . . . . . . . . . .Slave Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Structure of the Slave Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Structure of Station Statuses 1 to 3, Master Station Number

31、 and ManufacturerIdentification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-56-16-26-46-66General Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Standards a

32、nd Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Electromagnetic Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Shipping and Storage Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Mech

33、anical and Climatic Environmental Conditions . . . . . . . . . . . . . . . . . .Details of Insulation Testing, Safety Class, and Degree of Protection . . .Rated Voltage of the ET 200L Distributed I/O Device . . . . . . . . . . . . . . . . .6-76-86-9ET 200L Distributed I/O Device EWA-4NEB 780600902-0

34、5vContents7Terminal Blocks and Supplementary Terminals Technical Data . . . . . . . . . . .7-17.1Terminal Block TB 16L 6ES7 193-1CH00-0XA0,6ES7 193-1CH10-0XA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terminal Block TB 32L 6ES7 193-1CL00-0XA0,6ES7 193-1CL10-0

35、XA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Supplementary Terminals for the TB 16L and TB 32L . . . . . . . . . . . . . . . .7-27.27-47-78-18-28-58-88-118-14A-1A-2A-5B-1C-1C-2C-37.38ET 200L Electronics Blocks Technical Data . . . . . . . . . . . . . . . . .

36、 . . . . . . . . . . . .8.48.5Electronics Block L 16 DI DC 24 V 6ES7131-1BH01-0XB0 . . . . . . . . . .Electronics Block L 16 DO DC 24 V/0.5 A 6ES7132-1BH00-0XB0 . . . .Electronics Block L 32 DI DC 24 V 6ES7131-1BL01-0XB0 . . . . . . . . . . . .Electronics Block L 32 DO DC 24 V/0.5 A 6ES7132

37、-1BL00-0XB0 . . . .Electronics Block L 16 DI/16 DO DC 24 V/0.5 A 6ES7133-1BL01-0XB0AOrder Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A.1A.2Order Numbers for ET 200L Components . . . . . . . . . . . . . . . . . . . . . . .

38、. . .Order Numbers for PROFIBUS Accessories . . . . . . . . . . . . . . . . . . . . . . . .BCType and Device Master Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Guidelines for Handling Electrostatically Sensitive Devices (ESD) . . . . . . . . .C.1C.2C.

39、3What is ESD? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Electrostatic Charging of Persons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .General Protective Measures Against Electrostatic DischargeDamage . . . . . . . . . .

40、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-4GlossaryGlossary-1Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index-1ET 200L Distributed I/O Device EWA-4NEB 780600902-05

41、viContentsFigures1-11-22-12-22-33-13-23-33-45-17-1A Typical PROFIBUS-DP Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .View of the ET 200L Distributed I/O Device . . . . . . . . . . . . . . . . . . . . . . . . .Installing the Terminal Block . . . . . . . . . . . . . . . .

42、. . . . . . . . . . . . . . . . . . . . . .Disassembling the Terminal Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Installing the Electronics Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Operating the ET 200L from a Grounded Supply . . . . .

43、. . . . . . . . . . . . . . . .How the Spring Terminal Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terminal Connections on Terminal Block TB 16L . . . . . . . . . . . . . . . . . . . . .Alternative Ways of Connecting the Voltage Supply . . . . . . . . . . . . . . . . .

44、 .Structure of the Slave Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-21-62-32-42-53-63-93-103-115-4The TB 16L Terminal Block with the Electronics Block Clipped On, DimensionDrawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45、. . . . . . . . . . . . . . .7-27-2The TB 32L Terminal Block with the Electronics Block Clipped On, DimensionDrawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TB 16L/TB 32L Supplementary Terminals, Dimension Drawing . . . . . . . .Vi

46、ew of the L 16 DI DC 24 V Electronics Block . . . . . . . . . . . . . . . . . . . . . .Block Diagram of the L 16 DI DC 24 V Electronics Block . . . . . . . . . . . . . .View of the L 16 DO DC 24 V/0.5 A Electronics Block . . . . . . . . . . . . . . . .Block diagram of the L 16 DO DC 24 V/0.5 A Elect

47、ronics Block . . . . . . .View of the L 32 DI DC 24 V Electronics Block . . . . . . . . . . . . . . . . . . . . . .Block diagram of the L 32 DI DC 24 V Electronics Block . . . . . . . . . . . . . .View of the L 32 DO Electronics Block DC 24 V/0.5 A . . . . . . . . . . . . . . . .Block Diagram of the

48、 L 32 DO DC 24 V/0.5 A Electronics Block . . . . . . . .View of the L 16 DI/16 DO DC 24 V/0.5 A Electronics Block . . . . . . . . . . .Block Diagram of the L 16 DI/16 DO DC 24 V/0.5 A Electronics Block . . Labeling Strips 6ES7193-1BH00-0XA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .La

49、beling Strips 6ES7193-1BL00-0XA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Electrostatic Voltages which can Build up on a Person . . . . . . . . . . . . . . . .7-57-38-18-28-38-48-58-68-78-88-98-10A-1A-2C-17-88-28-38-58-68-88-98-118-128-148-15A-3A-4C-3ET 200L Distributed I/O Device EW

50、A-4NEB 780600902-05viiContentsTables1-11-23-13-23-35-15-25-35-46-17-17-27-38-1A-1A-2A-3A-4A-5A-6B-1B-2B-3B-4General Components for the ET 200L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Components of the ET 200L Distributed I/O Device . . . . . . . . . . . . . . . . . .DIN VDE Regula

51、tions for Installation of a Controller . . . . . . . . . . . . . . . . . .Pinout of the PROFIBUS-DP Terminal Connection . . . . . . . . . . . . . . . . . . .Pinout of the PROFIBUS-DP Terminal Connection . . . . . . . . . . . . . . . . . . .Diagnostics Using the LED Display . . . . . . . . . . . . .

52、. . . . . . . . . . . . . . . . . . .Function Blocks for Slave Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Structure of Station Status 1 (Byte 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Structure of Station Status 2 (Byte 1) . . . . . . . . . . . . . . .

53、 . . . . . . . . . . . . . . .Rated Voltage of the ET 200L Distributed I/O Device . . . . . . . . . . . . . . . .Pinout of the TB 16L Terminal Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pinout of the TB 32L Terminal Block . . . . . . . . . . . . . . . . . . . . . . . . . . .

54、. . . .1-41-73-43-83-125-25-45-55-66-97-37-67-78-1A-2A-2A-2A-5A-6A-6B-2B-3B-4B-4Supplied Versions of the Supplementary Terminals. . . . . . . . . . . . . . . . .Assignment of the ET 200L Electronic Blocks to the Terminal Blocks. . Terminal Block Order Numbers . . . . . . . . . . . . . . . . . . . .

55、. . . . . . . . . . . . . . .Electronics Block Order Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Supplementary Terminal Order Numbers. . . . . . . . . . . . . . . . . . . . . . . . . .Accessories for the ET 200 Distributed I/O Device . . . . . . . . . . . . . . . . . . .

56、Manuals for STEP 7 and SIMATIC S7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Manuals for ET 200 on SIMATIC S5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Version der Projektier-Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Data for PROFIBUS-DP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Maximum Number of Inputs and Outputs with the ET 200L . . . . . . . . . . . .DP Identifiers for the ET 200L.