mathtype6.8+保存公式到word后总自动添加一空格

MathType6.8+保存公式到 word 后总自动加一空格1. 症状公式编辑器 mathtype6.8 及以后版本 保存公式到 word 时，公式后总自动加一空格。例如：2. 原因分析简单而言：是 公司的技术考虑（故意放加 1 个空格的） ，为的是：避免 mathtype 插入 word 的内联公式（ inline equation）如果是word 中 1 行的最后一个元素时，出现众所皆知的一个 word 问题： inline equations appear raised above the baseline（想了解这个问题，请参考：/en/support/mathtype/tsn/tsn129.htm） 。具体原因分析请参考以下原文（原文的链接地址：/en/support/mathtype/tsn/tsn143.htm）TechNote #143: Last modified: 08/01/20123. MathType 6.8: an extra space is inserted after inline equations3.1. The information in this document applies to: MathType 6.8 (Windows) Microsoft Office 2010 (Windows) Microsoft Office 2007 (Windows)3.1.1. Issue:When inserting an inline equation, an extra space is inserted after the equation in Word.3.1.2. Reason:The space was added as a workaround to a known Microsoft issue that occurs when inline equations are the last object on a line causing inline equations appear raised above the baseline.3.1.3. Solution:Since the inclusion of an extra space after an equation can at times have a negative effect on formatting, there is a simple registry key that can be added in order to prevent the extra space. To do so, follow the instructions below.1. Exit from Microsoft Word and MathType2. Click to download the registry key to your default download location3. Unzip the downloaded file. This will reveal a folder called MTW68RegFix that contains a file called WordCommands.reg4. Double Click on WordCommands.reg to install this registry key (depending on your version of Windows, you may be prompted to confirm/allow this action)5. Note, adding this registry key will remove the workaround and the potential for poor baseline alignment will return.This will eliminate the extra space inserted after an inline equation. You can edit this registry key to turn the feature on or off as required by your work-processes as follows:1. Click Start2. Type regedit in the Start Search box, and then press ENTER.3. If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.4. Navigate to the following registry subkey:o HKEY_CURRENT_USERSoftwareDesign ScienceDSMT6WordCommands5. Located in the right pane is a string value for NoSpaceAfterInline. Edit the value as follows:o To include an extra space after an inline equation, value should be 0o To disallow an extra space after the equation, value should be 14. 解决办法有两个解决办法（本质上其实就一个：添加注册表键值） 。 方法一：从网络上下载一个注册表补丁，运行下载的“WordCommands.reg”。下载地址：/en/dl/MTW68RegFix.zip。其目的就是第二种方法所做的“在注册表相关位置添加 1 个特定的键值” 。 方法二：打开 Windows 注册表（打开方法不细说，不会的自己 google或 baidu） ，进入分支“HKEY_CURRENT_USERSoftwareDesign ScienceDSMT6WordCommands”（注意，如果此分支 【注册表左边目录树中的 1 个文件夹】不存在，则手动建立它。特别是WordCommands 这个分支，有些人的机器上可能不一定有。那么手动建立它。然后，在在 WordCommands 分支下建立 String 类型的键“No