关 键 词：

JK2X1 提升 机制 车削 装置 毕业设计

资源描述：

JK2X1.5提升机制动盘车削装置毕业设计,JK2X1,提升,机制,车削,装置,毕业设计

内容简介：

河南理工大学万方科技学院本科毕业论文 摘要 JK或者XKT绞车进入现场安装完毕后盘形闸和卷筒都要焊接一体。由于绞车长期存放，或者使用一段时间后经常会出现制动盘跳动超过要求的现象，直接影响提升机的制动性能。以免制动盘欲行偏摆、刹车不稳。本课题研究的目的在于解决现场车削制动盘，避免跳动和偏摆，保证制动要求。考虑成本，可操作性，本次设计选用高速车削磨光的方法消除制动盘的轴向跳动，偏摆问题。关键词：提升机，制动盘，高速车削Abstract JK or XKT drawwork entered the scene after the installation disk brake and drum are welding one. Due to the long term store, or use winch after a period of time often appear brake disc beating exceed requirements phenomenon, directly affecting hoist brake performance. Due to the factory brake disc not fine cars, and this brings to on-site construction problem, winch brake disc must site turning in polish. Lest brake disc to do partial pendulum, brake instability. This research aims to solve the field turning brake disc, avoid beating and partial pendulum, ensure braking requirements. Consider cost, maneuverability, the design method of high speed cutting polished chosen to eliminate the brake disc axial beating and partial pendulum problem