各种视频插头插座接口介绍(引脚定义).doc

各种视频插头插座接口介绍(引脚定义)SCART plug connector: CENELEC (Comit Europen de Normalisation Electrotechnique) EN 50 049-1 / IEC 933-1Pin No. Signal Inter Conne-ction Pin No.1 Audio right channel output (0.5 Vrms, 1K ohms) 2 2 Audio right channel input (0.5 Vrms, 10K ohms) 1 3 Audio left channel output (0.5 Vrms, 1K ohms) 6 4 Audio ground 4 5 Blue signal ground 5 6 Audio left channel input (0.5 Vrms, 10K ohms) 3 7 Blue signal I/O (0.7 Vp-p, 75 ohms) 7 8 Function switching I/O (L: 2V, H: 10V, 10K ohms) 8 9 Green signal ground 9 10 Intercommunication data line No. 1 10 11 Green signal I/O (0.7 Vp-p, 75 ohms) 11 12 Intercommunication data line No. 2 12 13 Red signal ground 13 14 Blanking signal ground 14 15 Red signal I/O (0.7 Vp-p, 75 ohms) 15 16 Blanking signal I/O (L: 0.4V, H: 1.0V, 75 ohms) 16 17 Composite video signal ground 18 18 Blanking signal ground 17 19 Composite video signal output (1 Vp-p, 75 ohms, sync: negative) 20 20 Composite video signal input (1 Vp-p, 75 ohms, sync: negative) 19 21 Plug shield (common ground) 21 此主题相关图片如下：EIAJ RGB plug connector: EIAJ TTC-003Outlook of plug and connector including pin assignment are the same as SCART plug and connectorPin No. Signal Inter Conne-ction Pin No.1 Audio left channel input (0.40 mVrms, 47K ohms) 1 2 Audio left channel output (0.40 mVrms, 10K ohms) 2 3 Audio ground 3 4 Audio ground 4 5 Audio right channel input (0.40 mVrms, 47K ohms) 6 6 Audio right channel output (0.40 mVrms, 10K ohms) 5 7 Video ground 7 8 Video ground 8 9 CVBS input (1 Vp-p, 75 ohms, sync: negative) 10 10 CVBS output (1 Vp-p, 75 ohms, sync: negative) 9 11 AV control input 11 12 Ym input (switch for R, G B signal to half tone level, L: 0.4, H: 1.0, 75 ohms) 12 13 Red signal ground 13 14 Ground 14 15 Red signal I/O (0.7 Vp-p, 75 ohms) 15 16 Ys input (switch for R, G B signal from/to internal and external, L: 0.4, H: 1.0, 75 ohms) 16 17 Green signal ground 17 18 Blue signal ground 18 19 Green signal I/O (0.7 Vp-p, 75 ohms) 19 20 Blue signal I/O (0.7 Vp-p, 75 ohms) 20 21 Plug shield 21 S-connector: EIAJ CP-1211, IEC 84(s)80Pin No. Signal1 Luminance (Y) signal ground 2 Chrominance (C) signal ground 3 Luminance (Y) signal I/O (1 Vp-p, 75 ohms, sync: negative) 4 Chrominance (C) signal I/O (burst: 0.286 Vp-p, 75 ohms) S1 and S2 connectorPin No. S1 connector S2 connector 1 Luminance (Y) signal ground Luminance (Y) signal ground 2 Chrominance (C) signal ground Chrominance (C) signal ground 3 Luminance (Y) signal I/O (1 Vp-p, 75 ohms, sync: negative) Luminance (Y) signal I/O (1 Vp-p, 75 ohms, sync: negative) 4 Chrominance (C) signal I/O (burst: 0.286 Vp-p, 75 ohms)Squeeze control input:+ 5V DC / 100KW Chrominance (C) signal I/O (burst: 0.286 Vp-p, 75 ohms)Squeeze control input:+ 5V DC / 100KWLetterbox control input:+ 2.2V DC / 100KW EIAJ D-connector D1/2/3/4/5: EIAJ RC-5237Pin No. Signal1 Y signal I/O (+700 mV sync: +/-300 mV *1, 75 ohms) 2 Y_GND 3 PB (+/- 350 mV, 75 ohms) 4 PB_GND 5 PR (+/- 350 mV, 75 ohms) 6 PR_GND 7 Reserved line 1 8 Line 1 (0V: 525 lines, 2.2V: 750 lines, 5V: 1125 lines) 9 Line 2 (0V: 59.94i / 60i, 2.2V: -, 5V: 59.94p / 60p) 10 Reserved line 2 11 Line 3 (0V: 4:3, 2.2V: 4:3 letter box, 5V: 16:9) 12 Plug insert detect GND 13 Reserved line 3 14 Plug insert detect (output: 10K ohms, input: 100K ohms) hooks Shell GND *1:for 1125i and 750p. -300mV for 525p/525i, superimposed in Y signalNote: Indication for video signal format (i: interlace, p: progressive)D1: 525iD2: 525i, 525pD3: 525i, 525p, 1125iD4: 525i, 525p, 1125i, 750pD5: 525i, 525p, 1125i, 750p, 1125pVESA DFP connector: VESA (Video Electronics Standards Association) Digital Flat Panel (DFP) StandardPin No. Signal Name Signal1 TX1+ TMDS positive differential output, channel 1 2 TX1- TMDS negative differential output, channel 1 3 SHLD1 Shield for TMDS channel 1 4 SHLDC Shield for TMDS clock 5 TXC+ TMDS positive differential output, reference clock 6 TXC- TMDS negative differential output, reference clock 7 GND Logic Ground 8 +5V Logic +5V DC Supply from the Host 9 No Connect No Connection 10 No Connect No Connection 11 TX2+ TMDS positive differential output, channel 2 12 TX2- TMDS negative differential output, channel 2 13 SHLD2 Shield for TMDS channel 2 14 SHLD0 Shield for TMDS channel 0 15 TX0+ TMDS positive differential output, channel 0 16 TX0- TMDS negative differential output, channel 0 17 No Connect No Connection 18 HPD Hot Plug Detection (+5V DC to Host) 19 DDC_DAT DDC2B Data 20 DDC_CLK DDC2B Clock TMDSTM: Transition Minimized Differential SignalingDDC: Display Data ChannelDDC2B: Simplest of the DDC modes defined in the VESA DDC standard此主题相关图片如下：VESA PD connector: Plug and Display Standard (PDTM)Pin No. SignalPin No. Signal1 TMDS Data2 + 16 USB data + 2 TMDS Data2 - 17 USB data - 3 TMDS Data return 18 1394 outer sahield (optional) Charge Power return 4 Unused 19 1394 Vg 5 Unused 20 1394 Vp 6 Unused 21 TMDS Data0 + 7 TMDS Clock return 22 TMDS Data0 - 8 Charge power + 23 TMDS Data return 9 1394 pair A, data - 24 Unused 10 1394 pair A, data + 25 DDC return 11 TMDS Data1 + 26 DDC data (SDA) 12 TMDS Data1 - 27 DDC clock (SCL) 13 TMDS Data return 28 +5V DC 14 TMDS Clock + 29 1394 pair B, clock + 15 TMDS Clock - 30 1394 pair B, clock - (TMDS: Trademark of Silicon Image, USB: universal serial bus, DDC: display data channel, SDA: serial data, SCL: serial clock)此主题相关图片如下：IEEE 1394-1995:Pin No. Signal Name Signal Inter ConnectionInter Connection with i-Link 1 VP Cable power 1 2 VG Cable ground 2 3 TPB* Strobe on receive, data on transmit (differential pair) 5 1 4 TPB 6 2 5 TPA* Strobe on receive, data on transmit (differential pair) 3 3 6 TPA 4 4 i-Link: 4-pin type IEEE 1394-1995Pin No. Signal Name Signal Inter ConnectionInter Conne