钢坯火焰清理机之钢坯输送系统设计【带三维】【优秀含3张CAD图纸+全套机械毕业设计】

!【详情如下】CAD图纸+word设计说明书.doc[18000字，43页]【需要咨询购买全套设计请加QQ97666224】.bat

滚筒心轴.dwg

电动机3.dwg

轴.dwg

驱动式滚筒运输机装配图.dwg

三维图

中期检查表.doc

任务书.doc

内封面.docx

封面.docx

开题报告.doc

毕业设计（终稿).doc

评阅表.docx

鉴定意见.docx

目  录

中文摘要······························································································1

ABSTRACT·························································································1

第一章 总体方案设计··········································································2

第二章 电动机的选择··········································································4

第三章 三角胶带传送设计··································································5

第四章 减速器设计·············································································7

第五章 联轴器选择·············································································20

第六章 锥齿轮传动设计······································································21

第七章 小锥齿轮设计及轴承座设计···················································24

第八章 滚筒、滚筒轴及配件的设计···················································25

致谢······································································································27

参考文献······························································································28

附录一 滚筒运输机机架部分示意图···················································29

附录二 英文技术资料及中文翻译·······················································3

摘  要

摘要内容：

   本次设计的主要内容有：传动方案的总体设计、电动机的选择、三角胶带传动设计、减速器的设计、联轴器的设计、锥齿轮传动设计及滚筒运输架等的设计。本次设计我采用了三角胶带传动，圆柱齿轮减速器及锥齿轮传动。

关键词：

   电动机.      齿轮.     减速器.     轴承.     滚筒.  

Summary

Summary contents:

     The main contents of this design has:Spread to move the choice,triangle tape that project that total design,electric motor spread move the design,stalk that decelerate the join shaft ware of design, the subulate wheel gear spread to move the design and roller the conveyance the design for waiting.This design I adopted the triangle tape to spread to move ,and the cylinder wheel gear decelerate the machine and subulate wheel gear to spread to move.

Keywords:

Electrpmotor.  gear wheel.   Reducer.  Axletree.   Platen. 第一章 总体方案设计

   驱动式滚筒运输机的原动机选用电动机。因为滚筒的转速为：n5=V/πD  （D为滚筒直径），初步选取滚筒直径为D=380mm，滚筒长度L=4150mm，滚筒间的间距为l=630mm，因为驱动式滚筒运输机共5m长，故滚筒共8根。

故  n5=51.0 r/min 。

   为了使电动机转速减为n5 ,故驱动装置与电动机之间必有减速器，为使各滚筒同时转动，各滚筒由锥齿轮带动。电动机与减速器之间由带轮联接，减速器与锥齿轮由联轴器联接。

参考文献

[1]彭万喜，胡英强.厂内运输机械[M].武汉：华中科技大学出版社，2006.        

[2]濮良贵，纪名刚.机械设计[M].北京：高等教育出版社，2008.                        

[3]吴宗泽，罗圣国.机械设计课程设计手册[M].北京：高等教育出版社，        .

[4]机械手册联合编写组.机械设计手册[M]（上册，第一分册）.北京：化学工业出版社    

[5]机械手册联合编写组.机械设计手册[M]（上册，第二分册）.北京：化学工业出版社    

[6]机械手册联合编写组.机械设计手册[M]（中册，第一分册）.北京：化学工业出版社