过程材料.doc

小型农机旋耕机结构设计【优秀含15张CAD图纸+农业用机械全套课程毕业设计】

收藏

压缩包内文档预览:
预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图
编号:463213    类型:共享资源    大小:2.96MB    格式:RAR    上传时间:2015-07-30 上传人:QQ14****9609 IP属地:陕西
45
积分
关 键 词:
小型 农机 旋耕机 结构设计 优秀 优良 15 cad 图纸 机械 全套 课程 毕业设计
资源描述:

小型农用旋耕机的设计

小型农机旋耕机结构设计【优秀含15张CAD图纸+机械用机械全套课程毕业设计】

【带任务书+开题报告+审定表+外文翻译】【41页@正文13300字】【详情如下】【需要咨询购买全套设计请加QQ1459919609 】

任务书.doc

审定表.doc

封面.doc

开题报告.doc

毕业设计中期检查表[1].DOC

目录.doc

说明书.doc

过程材料.doc

一轴.dwg

三轴.dwg

二轴.dwg

右1.dwg

四轴1.dwg

大直齿轮.dwg

大链轮.dwg

大锥齿轮.dwg

小直齿轮.dwg

小链轮.dwg

小锥齿轮.dwg

左1.dwg

支臂.dwg

旋耕机装配图.dwg

机架.dwg

任务书

题目名称小型农机旋耕机结构设计

一、设计(论文)目的、意义

随着新的种植、耕作农艺的发展和推广,新系列旋耕机采用的新型旋耕刀,综合了合理的速度

参数、 幅宽和复式作业功能,采用旋耕机基础件组合式结构,可组装再多种机型上,满足不同的用途与农艺要求。目前我国旋耕机的使用范围不断扩大,从南方水田到北方旱地以及牧场荒地和果林等都广泛使用旋耕机进行耕耘作业。

二、设计(论文)内容、技术要求(研究方法)

设计内容:

1、分析研究题目的意义和发展状况;

2、进行总结分析,确立设计方案,

3、小型农用旋耕机总体设计;

拟解决的问题:

1、解决小型农用旋耕机的总体结构设计问题 ,从而更合理地对不同地域的适应能力。

2、解决旋耕机的刀具分配的距离,刀具的工作寿命。

研究方法:

 1、利用对比确定总体方案,根据机械设计理论和方法设计旋耕机结构;

 2、进行零件的设计和校核;

三、设计(论文)完成后应提交的成果

1.提交材料:毕业设计说明书1份(不少于20000字),0号图纸折合3张以上。

2.其他:为答辩需要,可提供相关调研报告。

四、设计(论文)进度安排

   3月01号~3月20号        听毕业设计讲座 查阅资料 撰写开题报告

3月21号~4月20号        确定方案设计、有关计算校核      

4月21号~5月20号        画CAD草图、撰写说明书

5月21号~5月30号        出CAD图、整理说明书 更改并最终完成设计

   6月1号~6月20号         提交指导老师审核、准备答辩

五、主要参考资料

[1] 马兰.机械制图.北京:机械工业出版社,2000.5

[2]郑甲红,朱建儒,刘喜平.机械原理.机械工业出版社,2006.1

[3] 彭国勋,肖正扬编著.自动机械的机构设计.北京:机械工业出版社,1990

[4] 邹慧君.机械系统设计原理.北京:科学出版社,2003

[5] 吴宗泽,罗圣国.机械设计课程设计手册[M].3版.北京:高等教育出版社,2006.5

[6] 张春林.机械创新设计.2版.北京:机械工业出版社,2007.9

[7] 吕志强,董海.人机工程学[M].北京:机械工业出版社2006.6

[8] 董敬,庄志,常思勤.汽车拖拉机发动机.3版.北京:机械工业出版社,2000

[9] 吴官聚﹑杨志义编.新编耕种机械使用维修. 北京:机械工业出版社,2001    

  [10] [联邦德国] H.L.文内尔著.现代农业机械化技术. 北京:中国农业机械出版社,1990

[11]周建来、李源知、焦巧凤.农机化研究2000.05,49~51,第2期国内外旋耕机的技术状况.

[12]周宏明、郑蓓蓉、薛伟.农机化研究2002.08,85~87,第3期旋耕机总体参数的优化设计.

[13][日]山胁三平主编,郭殿福、裴克译.林业机械手册. 北京:中国林业出版社,1987

  [14] Mi Bolin,Tu Chenghai, Guan yanling,Li Bai,Zheng Qiumei. Journal of Northeast Agricultural University,Vol.5,No.1 48~54. Northeast Agricultural University Harbin

[  [15]Suh C H,Radcliffe C W.Kinematics and Mechanisms Design.New York:John Wiley&Sons,1978

目   录

摘要

Abstract

第1章 绪论…………………………………………………………………………1

    1.1 概述…………………………………………………………………………1

        1.1.1发展历史和背景 ……………………………………………………1

        1.1.2设计简介 ……………………………………………………………1

        1.1.3研究方向 ……………………………………………………………3


第2章 总体方案的确定…………………………………………………………4

    2.1 旋耕机的组成………………………………………………………………4

    2.2 旋耕机的传动分……………………………………………………………4

    2.3 旋耕机的工作过程…………………………………………………………5

2.4 本章小结……………………………………………………………………5


第3章 中间齿轮传动的设计 …………………………………………………6

    3.1中间齿轮传动箱中一轴和直齿轮的设计…………………………………6

        3.1.1 一轴的设计…………………………………………………………6

        3.1.2直齿轮的计算   ……………………………………………………7

        3.1.3轴承的选择 …………………………………………………………9

        3.1.4 一轴的校核…………………………………………………………9

    3.2中间齿轮传动箱中二轴和锥齿轮的设计…………………………………13

        3.2.1 二轴的设计…………………………………………………………13

        3.2.2锥齿轮的计算 ………………………………………………………14

        3.2.3轴承的选择 …………………………………………………………16

    3.3 本章小节……………………………………………………………………16


第4章 侧边传动的设计…………………………………………………………17

    4.1 侧边传动中三轴的设计……………………………………………………17

    4.2侧边传动中链轮的设计 ……………………………………………………18

       4.2.1链的选择………………………………………………………………18

       4.2.2链轮的尺寸计算………………………………………………………20

    4.3 本章小节……………………………………………………………………25


第5章 弯刀、刀座及刀轴设计 ………………………………………………26

    5.1 刀轴的设计计算……………………………………………………………26

        5.1.1刀轴的设计 …………………………………………………………26

        5.1.2轴承的选择 …………………………………………………………27

    5.2弯刀的设计与计算…………………………………………………………27

        5.2.1弯刀的类型 …………………………………………………………27

        5.2.2弯刀的设计 …………………………………………………………28

        5.2.3弯刀的配置与排列 …………………………………………………31

        5.2.4弯刀的安装 …………………………………………………………32

    5.3本章小节……………………………………………………………………33

结  论 ………………………………………………………………………………34

参考文献 ……………………………………………………………………………35

致  谢

摘  要

本次设计的旋耕机是在学习国内外旋耕机设计的的基础上,经过吸收并进行改进设计的。本次设计的小型旋耕机是一种普遍使用的耕耘农机用具,采用的是拖拉机牵引,侧边链传动,用于平原、山地、丘陵等的翻土、播种等多种田间作业。

本次设计的主要任务是设计小型农用旋耕机的传动和工作等部分。小型农用旋耕机的传动部分由直齿轮、锥齿轮和链轮组成,工作部分由弯刀和刀轴组成。动力经传动部分带动工作部分在山地、丘陵等大型农机具难以耕作的地方进行耕作。本次设计的旋耕机操作简单,技术要求不高,符合国情。

本文重点讨论了小型农用旋耕机的传动部分的设计和计算问题,详述了小型农用旋耕机的三大主要部件的设计过程,包括中间齿轮传动部分、侧边传动部分、弯刀、刀座和刀轴部分。合理采用了花键轴、圆锥滚子轴承、深沟球轴承、滚子链等零件。


关键词:旋耕机;刀辊;侧边链传动;中间齿轮传动部分;轴承

ABSTRACT                                    

This small rotary filed tiller is designed and based on studying and absorbing the domesticand international designing tillers . The rotary filed tiller is a kind of universal, articular farm machine. It has adopted the measure of tractor-mounted and side chain drive  and can be used for the tillage and cultivation on the plain,mountains regins, hilly land and so on.

The main task of this designing is to design the mechanical part of the rotary tiller’s drive and work and so on . The part of the rotary tiller’s drive is made of gear and taper-gear and chain-gear and the part of the rotary tiller’s work is made of tine and shaft .The motor drives the part of the rotary tiller’s drive and drives the part of the rotary tiller’s work  to till filed,mountains regins and hilly land which is the larger rotary tillers can not be used .This retory filed tiller is easy to operate and is not demand of high technique .It can be go with the state of China.

This thesis illustrates how to design and compute the parts of the rotary tiller’s drive, especially the process of how to design the three main parts which is middle gear drive,side chain drive,the tine carrier and shaft. It also adopts the parts of spline shaft ,taper-rolling bearing ,ball bearing ,dupiex chain and so on.

Key words: rotary tiller; tine;side chain drive;middle gear drive; bearing

第1章 绪   论

1.1 概述

1.1.1发展历史和背景

   旋耕机的发展至今已有150多年的历史,最初在英、美国家由3-4kw内燃机驱动,主要用于庭园耕作,直到L型旋耕刀研制成功后,旋耕机才进入大田作业。20世纪初,日本从欧洲引进旱田旋耕机后,经过大量的试验研究工作,研制出适用于水田耕作要求的弯刀,解决了刀齿和刀轴的缠草问题,旋耕机得到了迅速发展。

我国对旋耕机的研制始于20世纪50年代末,初期主要研制与手扶拖拉机配套的旋耕机,后来研制出与中型轮式拖拉机配套的旋耕机;70年代初完成了与当时国产的各类拖拉机配套的系列旋耕机的设计,并使之得到了推广应用;到80年代,与手扶拖拉机配套的旋耕机由专用型发展到兼用型,由与手扶拖拉机配套发展到与轮式及履带式拖拉机配套。旋耕机在我国的发展经历了单机研制、发展系列产品、新产品开发和换代3个阶段,随着新的种植、耕作农艺的发展和推广,在旋耕机基础上还研制出了多种用途的联合复式作业机。新系列旋耕机采用的新型旋耕刀,综合了合理的速度参数、幅宽和复式作业功能,采用旋耕机基础件组合式结构,可组装在多种机型上,满足不同的用途与农艺要求。目前我国旋耕机的使用范围不断扩大,从南方水田到北方旱地以及牧场、荒地和果林等都广泛使用旋耕机进行耕耘作业[21]。

参考文献

[1]中国农业机械化科学院.农业机械设计手册 (上册 )[M].北京:机械工业出版社,2000.

[2]北京农业工程大学.农业机械学 (上册 )[M].北京:农业出版社,2001.

[3]黄松平.小型农机具使用与维修[M].广州:广东科技出版社,2002.

[4]卜献真.手扶拖拉机配套旋耕机结构与原理[J]. 湖南农机,2006年第4期.

[5]周宏明,郑蓓蓉,薛伟.旋耕机总体参数的优化设 计[J].农机化研究,2002.

[6]何敦清.与手扶拖拉机配套的旋耕机[J].广东农 机.2002年第2期.

[7]李滨,崔东.小型农用旋耕机的设计[J].林业机 械与木工设备.2006年第 3期.

[8]李理,霍春明 .我国旋耕机研究现状及发展方向[J]. 农机化研究,2004,(10):37~38.

[9]李志红,杨良玖,全腊珍 .我国耕整机械现状及发展对策[J].农机化研究,2005,(3):46~47.

[10]王智才 .建设现代农业,加快推进农业机械化[J]. 农业机械学报,2004,(3):154~158.

[11]王亚东.农田耕作制度的发展研究[J].农机化研究, 2005,(6):44~49

[12]中国农业机械化科学院.农业机械设计手册 (上册)[M].北京:机械工业出版社,

2003.

[13]北京农业工程大学.农业机械学 (上册)[M].北京:北京农业出版社,2003.

[14]黄松平.小型农机具使用与维修[M].广东:广东科技出版社,1988.

[15]赵晨,李成华,敖永华.辽宁省种植业生产机械化存在的问题及发展趋势 [J].沈阳农业大学学报,2000,12(4): 38~40.

[16]吴官聚,杨志义编,新编耕种机械使用维修[M].北京:机械工业出版社2001.

[17]周建来,李源知,焦巧凤.国内外旋耕机的技术状况[J]  农机化研究 ,2000,(2):49~51,

[18]周宏明,郑蓓蓉,薛 伟.旋耕机总体参数的优化设计[J].农机化研究。2002.(3):85~87.

[19]北京农业工程大学.农业机械学(上)(第 2版)[M].北京:中国农业出版社,2001.49.150.

[20]王颖玉,应富强,潘 立.新型蔬菜大棚小型旋耕机的设计与研究[J].浙江工业大学学报,2007,(3):325~327

[21]于海明,张 雪,李连豪,等.微型旋耕机的设计[J].黑龙江八一农垦大学学报,2007,19(2):33~35.

[22]孙 桓,陈作模.机械原理(第 6版)[M].北京:高等教育出版社2OO1.191~192.

[23]陈奎生.液压与气压传动[M].武汉:武汉理工大学出版社,2006.5~24,64,133~142.


内容简介:
毕业设计(论文)过程管理材料 题 目 小型农机旋耕机结构设计 学生姓名 熊加勇 系部名称 机电工程 学院 专业班级 机械设计制造及其自动化 06-2 班 指导教师 孙晓娟 职 称 副教授 教研室 工程图学教研室 起止时间 2010/3/01 2010/6/20 教 务 处 制 nts 毕业设计(论文)题目审定表 指导教师姓名 孙晓娟 职称 副教授 从事 专业 机械工程 是否外聘 是否 题目名称 小型农机旋耕机结构设计 课题适用专业 机械设计 制造及其自动化 课题类型 X 课题简介:(主要内容、意义、现有条件、预期成果及表现形式。) 一、 主要内容 本次设计主要针对旋耕机 机架、悬挂架、传动部分、旋耕刀轴、刀片、罩壳等部分 进行设计 。 二 、目的意义 目前我国旋耕机的使用范围不断扩大,从南方水田到北方旱地以及牧场荒地和果林等都广泛使用旋耕机进行耕耘作业。 为了进一步推进我国农业机械化,针对 旋耕刀 、 速度参数、 幅宽和复式作业功能 进行优化设计;采用基础件组合式结构,完成本次设计,以满足不同农艺需求。 三 、现有条件 学生已学习过机械设计基础、机械制图、 发动机 构造、 工程机械地盘 、液压 传动 、 机械 工程材料及加工基础、 工程力学 等专业及专业基础课程,并完成了 柴油机拆装 实习、 机械制造工艺实习 、 金工 实习等实践环节,具备了完成设计的基础。哈市 的农业部门 可做为学生的调研对象,取得相应调研数据。 四 、预期成果 毕业设计说明书 1 份(不少于 20000 字); 0 号图纸折合 3 张以上;为答辩需要,可提供相关调研报告。 指导教师签字: 年 月 日 教 研 室 意 见 1 选题与专业培养目标的符合度 好 较好 一般 较差 2 对学生能力培养及全面训练的程度 好 较好 一般 较差 3 选题与生产、科研、实验室建设等实际的结合程度 好 较好 一般 较差 4 论文选题的理论意义或实际价值 好 较好 一般 较差 5 课题预计工作量 较大 适中 较小 6 课题预计难易程度 较难 一般 较易 教研室主任签字: 年 月 日 SY-025-BY-1 nts系(部)教学指导委员会意见 : 负责人签字: 年 月 日 注:课题类型填写 W.科研项目; X.生产(社会)实际; Y.实验室建设; Z.其它。 毕业设计(论文)任务书 学生姓名 熊加勇 系部 机电工程学院 专业、班级 机械设计制造及其自 动化 06-2 班 指导教师姓名 孙晓娟 职称 副教授 从事 专业 机械 工程 是否外聘 是否 题目名称 小型农 机 旋耕机结构设计 一、设计(论文)目的、意义 随着 新的种植、耕作农艺的发展和推广,新系列旋耕机采用的新型旋耕刀,综合了合理的速度 参数、 幅宽和复式作业功能,采用旋耕机基础件组合式结构,可组装再多种机型上,满足不同的用途与农艺要求。目前我国旋耕机的使用范围不断扩大,从南方水田到北方旱地以及牧场荒地和果林等都广泛使用旋耕机进行耕耘作业。 二、设计(论文)内容、技术要求(研究方法) 设计内容: 1、 分析研究题目的意义和发展状况; 2、 进行总结分析,确立设计方案, 3、 小型农用旋耕机总体设计; 拟解决的问题: 1、解决小型农用旋耕机的总体结构设计问题 , 从而更合理地对不同地域的适应能力。 2、解决 旋耕机的刀具分配的距离,刀具的工作寿命。 研究方法: 1、 利用对比确定总体方案 ,根据机械设计理论和方法设计旋耕机结构; 2、进行零件的设计和校核; SY-025-BY-2 nts三、设计(论文)完成后应提交的成果 1.提交材料:毕业设计说明书 1 份(不少于 20000 字), 0 号图纸折合 3 张以上。 2.其他:为答辩需要,可提供相关调研报告。 四、设计(论文) 进度安排 3 月 01 号 3 月 20 号 听毕业设计讲座 查阅资料 撰写开题报告 3 月 21 号 4 月 20 号 确定 方案设计、有关计算校核 4 月 21 号 5 月 20 号 画 CAD 草图、撰写说明书 5 月 21 号 5 月 30 号 出 CAD 图、整理说明书 更改并最终完成设计 6 月 1 号 6 月 20 号 提交指导老师审核、准备答辩 五、 主要参考资料 1 马兰 .机械制图 .北京:机械工业出版社 ,2000 5 2郑甲红 ,朱建儒 ,刘喜平 .机械原理 .机械工业出版社 ,2006.1 3 彭国勋 ,肖正扬编著 .自动机械的机构设计 .北京 :机械工业出版社 ,1990 4 邹慧 君 .机械系统设计原理 .北京 :科学出版社 ,2003 5 吴宗泽 ,罗圣国 .机械设计课程设计手册 M.3 版 .北京 :高等教育出版社 ,2006.5 6 张春林 .机械创新设计 .2 版 .北京 :机械工业出版社 ,2007.9 7 吕志强 ,董海 .人机工程学 M.北京 :机械工业出版社 2006.6 8 董敬,庄志,常思勤 .汽车拖拉机发动机 .3 版 .北京 :机械工业出版社 ,2000 9 吴官聚杨志义编 .新编耕种机械使用维修 . 北京:机械工业出版社, 2001 10 联邦德国 H.L.文内尔著 .现代农业机械化技术 . 北京:中国农业机械出版社, 1990 11周建来 、李源知、焦巧凤 .农机化研究 2000.05, 49 51,第 2 期国内外旋耕机的技术状况 . 12周宏明、郑蓓蓉、薛伟 .农机化研究 2002.08, 85 87,第 3 期旋耕机总体参数的优化设计 . 13日 山胁三平主编,郭殿福、裴克译 .林业机械手册 . 北京:中国林业出版社, 1987 14 Mi Bolin,Tu Chenghai, Guan yanling,Li Bai,Zheng Qiumei. Journal of Northeast Agricultural University,Vol.5,No.1 4854. Northeast Agricultural University Harbin 15Suh C H,Radcliffe C W.Kinematics and Mechanisms Design.New York:John Wiley&Sons,1978 nts六、备注 指导教师签字: 年 月 日 教研室主任签字: 年 月 日 毕业设计(论文)开题 报告 学生姓名 熊加勇 系部 机电工程学院 专业、班级 机械设计制造及其自动化 06-2 班 指导教师姓名 孙晓娟 职称 副教授 从事 专业 机械工程 是否外聘 是否 题目名称 小型农 机 旋耕机结构设计 一、 课题研究 现状、 选题 目的 和意义 1.课题研究现状 我国对旋耕机的研制始于 20世纪 50年代末,初期主要研制与手扶拖拉机配套的旋耕机,后来研制出与中型轮式拖拉机配套的旋耕机; 70年代初完成了与当时国产的各类拖拉机配套的系列旋耕机的设计,并使之得到了推广应用;到 80年代,与手扶拖拉机配 套的旋耕机由专用型发展到兼用型,由与手扶拖拉机配套发展到与轮式及履带式拖拉机配套。 2.选题目的和意义 因此目前研究新型的农用旋耕机是有其必要性的,由于机械化早已覆盖我国的平原地区;对新型机械的设计需提出以下几点要求:首先要小型化,以促使丘陵地区实现机械化;其次要低耗能,以保证绿色种植;最后要低价位,以满足大多数农户能够使用上新产品。 这样一来必定加快我国农业的机械化进程,让广大农民群众早日奔小康。 二、设计 的基本内容 、 拟解决的主要问题 设计内容: 1、 分析研究题目的意义和发展状况; 2、 进行总结分析 ,确立设计方案, 3、 小型农用旋耕机总体设计; 拟解决的问题: nts1、解决小型农用旋耕机的总体结构设计问题 ,从而更合理地对不同地域的适应能力。 2、解决 旋耕机的刀具分配的距离,刀具的工作寿命。 三、技术路线(研究方法) 1、 利用对比确定总体方案 ,根据机械设计理论和方法设计旋耕机结构; 2、进行零件的设计和校核; 拟取得的成果: 1、 设计说明书一份, 2 万字左右。 2、总体装备图 A0 一张,零件图若干,折合零号图 3 张。 四、进度安排 3 月 01 号 3 月 20 号 听毕业设计讲座 查阅资料 撰写 开题报告 3 月 21 号 4 月 20 号 确定 方案设计、有关计算校核 4 月 21 号 5 月 20 号 画 CAD 草图、撰写说明书 5 月 21 号 5 月 30 号 出 CAD 图、整理说明书 更改并最终完成设计 6 月 1 号 6 月 20 号 提交指导老师审核、准备答辩 nts五、 参考文献 1 马兰 .机械制图 .北京:机械工业出版社 ,2000 5 2郑甲红 ,朱建儒 ,刘喜平 .机械原理 .机械工业出版社 ,2006.1 3 彭国勋 ,肖正扬编著 .自动机械的机构设计 .北京 :机械工业出版社 ,1990 4 邹慧君 .机械系统设计原理 .北京 :科学出版社 ,2003 5 吴宗泽 ,罗圣国 .机械设计课程设计手册 M.3 版 .北京 :高等教育出版社 ,2006.5 6 张春林 .机械创新设计 .2 版 .北京 :机械工业出版社 ,2007.9 7 吕志强 ,董海 .人机工程学 M.北京 :机械工业出版社 2006.6 8 董敬,庄志,常思勤 .汽车拖拉机发动机 .3 版 .北京 :机械工业出版社 ,2000 9 吴官聚杨志义编 .新编耕种机械使用维修 . 北京:机械工业出版社, 2001 10 联邦德 国 H.L.文内尔著 .现代农业机械化技术 . 北京:中国农业机械出版社, 1990 11周建来 、李源知、焦巧凤 .农机化研究 2000.05, 49 51,第 2 期国内外旋耕机的技术状况 . 12周宏明、郑蓓蓉、薛伟 .农机化研究 2002.08, 85 87,第 3 期旋耕机总体参数的优化设计 . 13日 山胁三平主编,郭殿福、裴克译 .林业机械手册 . 北京:中国林业出版社, 1987. 15Suh C H,Radcliffe C W.Kinematics and Mechanisms Design.New York:John Wiley&Sons,1978 六、备注 指导老师意见: 签字: 年 月 日 Selecting a Rotary Garden Tiller The right rotary tiller can make the job of gardening much easier, but if you choose the wrong tiller for the job, it can make your job more difficult. Tillers range in size from small hand-held models to those weighing several hundred pounds, ntswith corresponding differences in capacity. There are several factors to consider in selecting the best tiller for your job. Size Several companies offer small, hand-held rotary tillers, typically with 2-cycle engines. These little tillers have star-shaped blades instead of separate tines. They are suitable for light-duty tilling such as cultivating small vegetable or flower gardens. They are narrow and can get into tight places. They will not till deeply, nor will they handle much surface trash. Other garden tillers range from 3-5 hp front-tine models to 8-10 hp rear-tine models. Some semi-commercial rear-tine models are even more powerful. The larger units have tilling widths of 20-26 inches and can cut 6-8 inches deep under ideal conditions. Front or Rear Tines Rotary tillers can have the tines in front of the wheels (front-tine) or behind the wheels (rear tine). The two styles overlap in size (horsepower and tilling width). The wheels on front-tine models are usually not powered, but the wheels on rear-tine models usually are. The tines are usually covered with a shield on a rear-tine tiller, but exposed on a front-tine tiller. Larger rear-tine tillers will have the ends of the tine assembly as well as the top shielded. Most rear-tine tillers provide a flap or drag at the rear to keep feet out of the tines and to level the tilled soil. The powered wheels on the rear-tine tillers help hold the tiller back and provide a more uniform speed, while you will have to control the speed of front-tine models by brute force. Depth control is generally easier with a rear-tine tiller since the depth control drag bar is generally effective. On front-tine models a drag bar is usually provided, but most depth control comes from how you hold the tiller. With a front-tine tiller, it is almost always necessary to walk right behind the tiller in the freshly tilled ground while fighting to control the machine. With a rear-tine tiller, it is often possible to walk to one side, controlling the tiller with one hand, and thus avoid walking in the tilled soil. Soil tilth is almost always better with a rear-tine tiller. Rear-tine models are more expensive but well worth the extra cost. ntsDrive Type Tiller tines can be driven by a shaft or a chain. The clutching mechanism can be an actual clutch or clutching can be accomplished by slackening a belt drive. Many rear-tine tillers will have two or more forward speeds as well as reverse. In many cases, it is necessary to hold the reverse control in place while going backward, but some tillers allow you to shift into reverse and operate just as you would in forward. The latter design is less safe. Forward or Reverse Tine Rotation Most tillers have the tines moving in a forward direction; in other words, the tines rotate in the same direction as the wheels. Some tillers turn the tines in reverse. The manufacturers who offer reverse tines claim that the reverse rotation is more effective at breaking up sod; however, reverse tine rotation should be avoided from the safety standpoint. With forward-rotating tines, if the tines grab on a root, rock, stump, etc., the tiller will jump forward - thus away from you. With reverse rotation, if the tines grab on anything, the tiller will jump backward - with the rotating tines coming at your feet and legs! Also, if you are maneuvering in tight quarters - in a fence corner or next to a building the tiller can come back at you, pin you against the obstacle and injure you. Forward rotation is much safer, and you should not purchase or use a reverse-rotation model. Reverse tine rotation should be used only on tractor-mounted tillers. Quality Tillers, like other lawn and garden equipment, are available in different levels of quality from different manufacturers. A quality tiller can easily cost two to three times as much as a comparably sized cheap tiller. Since tillers are work hard under adverse conditions, a high quality model is generally a good investment. Ergonomics There are big differences in the ergonomics of tillers. Some tillers that at first seem to be similar may, in fact, have different ergonomics. Some clutches are much easier to use than others, some reverse mechanisms are much easier to engage than others, some depth controls ntsare easy to move and some require tools and a struggle, some operator presence controls (OPCs) are easy to use and some are not. Try out a tiller or talk to an owner before buying a tiller. It is hard to evaluate ergonomics while looking at a tiller in a store (or a catalog); it takes personal experience to separate the good designs from the awkward designs. Remember, if you have a small garden you may be better off with a good garden spade and a scuffle hoe, and thus eliminate the cost and maintenance hassles of a tiller. If you really do need a tiller, a rear-tine model is much easier to use and does a better job. A small, hand-held tiller may be satisfactory for small jobs. Use of a Rotary Garden Tiller Whether you buy, rent or borrow a tiller, you will find that it has many uses. In some countries, particularly in Southeast Asia where farms are small, a rotary tiller is a general purpose farm tool. It can be a general purpose garden tool for you. Attachments Some tillers can be fitted with attachments to do jobs other than garden tilling. Some of the small hand-held models can be equipped with dethatching tines or rotary brushes. Some of the larger rear-tine tillers can handle a snow/dirt blade or a middle buster (lister); and can have the entire tiller assembly replaced with a sicklebar mower, a shredder/grinder or even a generator. These attachments can be useful, but may not work as well as separate machines. You have to decide whether this capability will be useful for you. Preparing the Garden Rotary tillers can be used for primary tillage (working up the garden in the spring), secondary tillage (breaking up clods and preparing the soil for planting) and for cultivation while the crop is growing. Under ideal conditions, one pass with the tiller may provide both primary and secondary tillage, leaving a good seedbed. Under other conditions, multiple passes may be needed to chop up existing vegetation and then prepare the seedbed. If vegetation is heavy, it is often helpful to make one or two passes and then leave it alone ntsuntil after the next rain before tilling again. This process will help the vegetation to break down. Primary tillage requires the slowest speed (lowest gear) available, but you can sometimes use a higher gear for secondary tillage. You should always run your tiller at full engine rpm and then shift up or down as needed. Garden Cultivation Tillers can be effective at cultivating around crops, and the cultivation can usually be done at a higher ground speed than you would use for primary or secondary tillage. Be careful to use a very shallow depth setting when cultivating to avoid damaging crop roots. It is best to avoid walking on the cultivated ground since weeds will germinate and/or re-establish better in your footprints. Growing and Incorporating Organic Matter A rotary tiller can contribute to the health of your garden soil by incorporating cover crops and green manure crops. In our climate, it is difficult to increase organic matter permanenly, but you can improve structure and tilth by incorporating vegetation and/or compost. A tiller can also be used in planting cover crops. After a seedbed is prepared, you can broadcast seed and then run the tiller over the ground at high speed and minimum depth to cover the seeds. A tiller is most effective at covering larger seeds such as peas. Small cover crop seeds such as ryegrass may be covered too deeply by a tiller; raking or dragging is more effective for small seeds. Middlebusting Probably the most useful accessory for your tiller is a wide sweep or middlebuster (sometimes called a furrower). This tool attaches to the rear of the tiller (with the tines still in place) and allows you to dig a shallow furrow. Two adjacent passes with a sweep or middlebuster will throw up a raised bed, which can be important in many parts of Louisiana. You can then level the top of the raised bed and plant your crops there. The furrow from a single pass is ideal for planting Irish potatoes. You can then run the sweep beside the row to ntscover the potato seed and again later to throw soil up on the plants. You can throw soil on sweet corn roots the same way. Trenching Tillers also have uses outside of the garden. A tiller can be helpful when digging a ditch or trench. Just run the tiller over the ditch lineto loosen the soil, then shovel out the loosened soil and repeat until you reach the desired depth. Tillers are useful garden helpers. It is difficult to manage a large garden without one. Proper use can make your gardening experience more pleasant and productive. Rotary Tiller Safety and Maintenance To get the best performance and longevity from your tiller, you need to maintain it properly. You also need to be aware of some of the dangers involved in using a tiller and take steps to protect yourself and others. Engine Maintenance You will need to maintain the engine on your tiller carefully. Because your tiller operates in dust and dirt, oil and filter changes are more critical than for lawn mowers and most other lawn and garden machines. At the very minimum, you should change the oil after 50 hours of use or at least once a year. If the oil looks dirty, change it more often. Keep any grease fittings properly lubricated. Check the oil in the gearcase or chaincase, and add as needed. Your air cleaner will need to be cleaned or replace often - perhaps as often as after 1-2 hours of use in dusty conditions. Occasionally, you will need to blow or brush the dust and dirt out of the cooling fins on the engine and flywheel. Tiller Maintenance One of the most important things you can do for your tiller is to keep it clean. Wash the tiller, particularly the tines and housing, after each use (be careful not to spray water on a hot engine!). For continued effectiveness, you will need to replace the tines when they become ntsworn down. You may occasionally need to adjust the control linkages. See your owners manual for instructions. Your tires should be maintained at the recommended pressure. End-of-season Storage Like many pieces of lawn and garden equipment, tillers are used seasonally and then stored for the winter. It is a good idea to change the oil before storing them. You should either run the gasoline tank dry or fill it with fresh gas containing a stabilizer. Check the spark plug and regap or replace if needed. If you are storing the tiller for several months, it is a good idea to squirt a teaspoonful or so of clean engine oil into the spark plug hole and then pull the starter rope to rotate the crankshaft a time or two before replacing the spark plug. Be sure to use a torque wrench to tighten the spark plugs. Many small engines are made of aluminum, and it is very easy to strip the threads when tightening the spark plug. Clean or replace the air filter. Check the oil in the gearcase or chaincase and refill (or replace if dirty). Be sure the tiller is clean before storage, then store it out of the weather. Be sure it is not stored in direct sunlight, because the UV light will degrade the tires. Safety Tiller tines are aggressive! They can chew up a hand or foot just as easily as a patch of bermudagrass. Stay away from rotating tines! Keep bystanders, particularly children, away from tillers. Watch out for roots, stumps, rocks, buried pipes, etc. that might cause the tiller to grab and jump. Even if it jumps away from you, it can cause a sprained back. A 200-pound tiller leaping forward can really jerk an operator. Avoid areas where electric or gas lines might be buried. Most tillers now have operator presence controls (OPCs) which consist of a lever or handle that must be held in place while operating or the engine will die (or the tines stop rotating). Dont try to defeat the OPC on a tiller. It is there to protect you. ntsRemember, your tiller works hard under some dirty conditions. You will need to be conscientious about maintenance to overcome the effects of the tilling environment. Remember, too, that tillers are potentially dangerous. Treat them with respect. 选择小型农用旋耕机 选择了合理的旋耕机能使你的田间作业事半功倍,相反,如果你选择了不合适的旋耕机,那么你的田间工作只能事倍功半了。 旋耕机的尺寸 系列从手扶式小型农用旋耕机到几百磅的大型农用旋耕机种类繁多,nts并且各有各的用途,你应当从多方面考虑选择对你最有帮助的旋耕机。 尺寸 很多公司提供了小型、手提式、及典型 2-循环发动机旋耕机,这些小型旋耕机用星形刀片代替齿状刀片。它们适合轻负载的耕种,例如,在小菜园或花园里耕作。它们耕作时既不会耕太深也不扬起很大的尘土。其它的小型旋耕机系列从 3-5 马力的前置式到8-10 马力的后置式旋耕机不一。一些半贸易型后置式旋耕机的马力甚至更大。大型旋耕机的耕宽为 20-26 英寸,并且在理想条件下耕深能达到 6-8 英寸。 前置或后 置式旋耕机 旋耕机有的弯刀在轮子前面,有的在轮子后面,这两种样式在参数(马力和耕宽)上重叠。轮子在前刀轴上的通常动力不大,而在后刀轴上的动力却很大。弯刀经常被后置的防护罩遮挡,相反,前置式却暴露在外面。大型后置式旋耕机将刀柄像防护罩一样集中在一起,大部分后置式旋耕机带有防护罩和拖板,以防止腿脚受伤或泥土溅出。当你通过蛮力来控制前置式旋耕机后退时,后
温馨提示:
1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
提示  人人文库网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。
关于本文
本文标题:小型农机旋耕机结构设计【优秀含15张CAD图纸+农业用机械全套课程毕业设计】
链接地址:https://www.renrendoc.com/p-463213.html

官方联系方式

2:不支持迅雷下载,请使用浏览器下载   
3:不支持QQ浏览器下载,请用其他浏览器   
4:下载后的文档和图纸-无水印   
5:文档经过压缩,下载后原文更清晰   
关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

网站客服QQ:2881952447     

copyright@ 2020-2025  renrendoc.com 人人文库版权所有   联系电话:400-852-1180

备案号:蜀ICP备2022000484号-2       经营许可证: 川B2-20220663       公网安备川公网安备: 51019002004831号

本站为文档C2C交易模式,即用户上传的文档直接被用户下载,本站只是中间服务平台,本站所有文档下载所得的收益归上传人(含作者)所有。人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。若文档所含内容侵犯了您的版权或隐私,请立即通知人人文库网,我们立即给予删除!