利用动态扫描和定时器1在数码管上显示出从765432开始以110秒的速度往下递减直至765398并保持显示此数,…….doc

利用动态扫描和定时器1在数码管上显示出从765432开始以1/10秒的速度往下递减直至765398并保持显示此数，与此同时利用定时器0以500MS速度进行流水灯从上至下移动，当数码管上数减到停止时，实验板上流水灯也停止然后全部开始闪烁，3秒后（用T0定时）流水灯全部关闭、数码管上显示出“HELLO”。到此保持住。Proteus仿真图：#include#include#define uint unsigned int#define uchar unsigned charvoid delayms(uint);/延时子程序void init();/初始化子程序void display(uint six,uint five,uint four,uint three,uint two,uint one);/显示子程序uchar code table=0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71,0X76,0X79,0X38,0X38,0X3F,0;uint temp,bai,shi,ge;uchar x,y,flag,led,flag1;void main()init();while(1)if(flag1=0)display(7,6,5,bai,shi,ge);elsedisplay(16,17,18,19,20,21);void init()temp=432;x=y=0;flag=0;flag1=0;led=0xfe;P3=led;EA=1;TMOD=0x11;TH0=(65536-50000)/256;TL0=(65536-50000)%256;ET0=1;TR0=1;TH1=(65536-50000)/256;TL1=(65536-50000)%256;ET1=1;TR1=1;void delayms(uint ms)uint x,y;for(x=ms;x0;x-)for(y=110;y0;y-);void display(uint six,uint five,uint four,uint three,uint two,uint one)P2=tablesix;P1=0xfe;delayms(1);P1=0xff;P2=tablefive;P1=0xfd;delayms(1);P1=0xff;P2=tablefour;P1=0xfb;delayms(1);P1=0xff;P2=tablethree;P1=0xf7;delayms(1);P1=0xff;P2=tabletwo;P1=0xef;delayms(1);P1=0xff;P2=tableone;P1=0xdf;delayms(1);P1=0xff;void timer0()interrupt 1TH0=(65536-50000)/256;TL0=(65536-50000)%256;x+;if(flag=0&x=10)x=0;led=_crol_(led,1);P3=led;if(flag=2)if(x%2=0)P3=P3;if(x=60)TR0=0;P3=0xff;flag1=1;void timer1()interrupt 3TH1=(65536-50000)/256;TL1=(65536-50000)%256;y+;if(y=2)y=0;temp-;if(temp=398)bai=temp/100;shi=temp%100/10;ge=temp%10;elseflag=1;if(flag=1)P3