mount和umount.doc

Moduel 4 Performing Mounts and Umounts Note While system administrators typically use the /usr/sbin/mount command, the system boot scripts use the /sbin/mount command. 介绍/etc/vfstab文件: /etc/vfstab列出系统启动时自动mount的文件, 除/etc/mnttab和/var/run之外; /etc/vfstab文件分出七个区域: device to mount 被mount的设备和伪设备 device to fsck The raw or character device e.g. /dev/rdsk下的 对于伪设备如:/proc 或 fd 这项可写 - mount point mount 的路径 FS type 文件系统类型 fsck pass 指示在系统启动时是否fsck检测;0不检1表示fsck为系统正常启动运行 大于1时表示把此设备加入fsck运行列表,fsck可同时检测8个设备, mountall命令忽略此项 mount at boot yes 要求启动时自动mount,no 则不 Note For / (root), /usr, and /var (if it is a separate file system) file systems, the mount at boot field value is specified as no. The kernel mounts these file systems as part of the boot sequence before the mountall command is run. The mount command explicitly mounts the file systems / (root) and /usr as specified in the /etc/rcS.d/S30rootusr.sh script and the /var file system as specified in the /etc/rcS.d/S70buildmnttab script. mount options A comma-separated list of options passed to the mount command. A dash (-) indicates the use of default mount options. 介绍/etc/mnttab文件: 此文件是一个只读文件,当mount一项时,会在此文件中入一条,umount后也会在此文件中删除相应项; 包括五项区域: mount point 挂接点 Device Name 设备名,块设备是文件系统的物理名称; Mount Options 文件系统上生效的挂载选项列表 dev=number 主从设备号 Date and time mounted mount的日期时间 使用mount mount /dev/dsk/c#d#t#s# /mountpoint 不加参数时,使用以下默认属性: read/write Indicates whether reads and writes are allowed on the file system. setuid Permits the execution of setuid programs in the file system. intr/nointr Allows and forbids keyboard interrupts to kill a process that is waiting for an operation on a locked file system. nologging Indicates that logging is not enabled for the ufs file system. largefiles Allows for the creation of files larger than 2 Gbytes. A file system mounted with this option can contain files larger than 2 Gbytes. xattr Supports extended attributes not found in standard UNIX attributes. onerror=action Specifies the action that the ufs file system should take to recover from an internal inconsistency on a file system. An action can be specified as: panicCauses a forced system shutdown. This is the default. lock Applies a file system lock to the file system. umount Forcibly unmounts the file system. - Note Due to file system overhead, the largest file size that can be created is approximately 866 Gbytes. - 使用mount命令的option Some options used to mount local file systems include: ro, nosetuid, noatime, nolargefiles, and logging. 格式: mount -o option,option,. device_name mount_point # mount -o ro /dev/dsk/c0t0d0s6 /usr -设成只读 下面是使用多个参数,设成只读以及不允许执行setuid进程,但并不限制生成setuid # mount -o ro,nosuid /dev/dsk/c0t0d0s7 /export/home 为提高磁盘访问性能,文件系统访问频繁,最后访问时间并不计较的可以 # mount -o noatime /dev/dsk/c0t0d0s7 /export/home 防止成生超过2G的文件, # mount -o nolargefiles /dev/dsk/c0t0d0s7 /export/home 如果文件系统已经存在超过2G的大文件,mount会挫败,如果想成功mount,则必须删除相关大文件, 并且删除后必须用fsck来更新超级块的信息,如果一次运行fsck还不能成功mount则必须用fsck 来清除超级块的信息; 使UFS文件系统写日志; # mount -o logging /dev/dsk/c0t0d0s7 /export/home 存放日志文件的大小,大约是每1G分配1M的大小,最大不超过64M字节; 当UFS日志达其最大时，它就开始将事务记录到文件系统中。文件系统被卸载时，整个UFS日志 都被清空，所有事务都被写入文件系统。 UFS日志有两个好处。一，它文件系统的不一致性，也就不再需要长时间运行fsck扫描。 二，可以跳过fsck扫描，这就减少了系统在被以非正常的关闭方法关闭时，重启的时间， 使用mountall命令: mountall -l 只mount本地的所有文件系统; mountall命令读取/etc/vfstab文件内容,当device to fsck 项大于0时,fsck会检测文件系统是否完好,以致于安全挂接.当系统文件坏掉,fsck会试图修复,mountall会mount其它挂接点,和device to fsck 项等于0的挂接点. mount一个新的文件系统: 八步: 1.把硬盘放入服务器, 2.重启或devfsadm让系统识别硬盘; 3.format把硬盘分区; 4.newfs在磁盘slice上生成新的文件系统; 5.在/目录下用mkdir 生成一个新的挂接点; 6.mount文件系统到挂接点; 7.用mount命令查看是否mount成功; 8.修改/etc/vfstab文件,让系统下次重启时自动加载; mount不同类型的文件系统: 如果mount时没有以mount -F fstype指明的话,mount会以ufs来作为默认的类型,mount根据设备名, 块名,或挂接点来判断文件类型; mount 不能从/etc/vfstab的fs entry来判断,会以/etc/default/fs file 或 /etc/dfs/fstypes来决定文件的挂接类型,如果是本地文件系统则是/etc/default/fs 文件中一行 LOCAL=ufs 来确定挂接类型; 如果是远程文件系统,则从/etc/dfs/fstypes第一行来确定 nfs NFS Utilities autofs AUTOFS Utilities cachefs CACHEFS Utilities Using the fstyp Command来查看文件类型: # fstyp /dev/rdsk/c0t0d0s7 ufs 指定一下hsfs文件系统: 当volume manage停止时,用hsfs来指定一个cdrom # mount -F hsfs -o ro /dev/dsk/c0t6d0s0 /cdrom 指定一个pcfs文件系统: 当卷管理停止时,挂接一个驻留在diskette(软盘)的文件系统 # mkdir /pcfs # mount -F pcfs /dev/diskette /pcfs 执行umount命令: 提示:在umount文件系统前,都是先从/etc/mnttab文件种删除相应行; 从挂接点删除: #umount /export/home 从逻辑硬件文件名删除: # umount /dev/dsk/c0t0d0s7 执行umountall命令: /usr/sbin/umountall命令会在系统关闭或在命令输入umountall时读取/etc/mnttab文件,然后umount vfstab文件中除/ (root), /usr, /proc, /dev/fd, /var,/var/run, and /tmp.之外所有行; umount所有文件系统: #umountall umount所有本地的文件系统: #umountall -l umountall状态为busy的系统: 以下四种情况,文件系统都会显示:umount: file_system_name busy 1 A program is accessing a file or directory in the file system 2 A user is accessing a directory or file in the file system 3 A program has a file open in that file system 4 The file is being shared 有两种方法解决: (1) 使用fuser命令来确认挂接点有那些进程在访问,然后杀掉 (2) 用umount -f 强制umount; 用fuser命令的四步: 1.确认挂接点有那些进程需要杀掉 #fuser -cu /mount_point 2.向进程发出SIGKILL信号: #fuser -ck /mount_point 3.确认看是否还有进程在访问挂接点 #fuser -c /mount_point 4.umount挂接点 #umount /mount_point umount -f 丢失数据,僵死进程,但比较适合远程共享时,远程没有响应. 在启动失败时,修复重要文件: 1.插入solaris 9 1 of 2 cd-rom 2.OBP下运行: oKboot cdrom -s 3.用fsck来检测修复/ 根目录: # fsck /dev/rdsk/c0t0d0s0 4.如果检测成功,把根目录的挂接点挂到一个新建的目录上: # mount /dev/dsk/c0t0d0s0 /a 5.设置TERM参数,使vi能正常工作: # TERM=sun # export TERM 6.编辑/a/etc/vfstab, 7.umount文件系统: # cd / # umount /a 8.重启系统init 6 访问mount 软盘和光盘 volume management提供两大益处: 1.对于root用户和非root用户,都提供diskettes and CD-ROMs的自动mount 2.能上其它网上系统访问本系统的移动存储设备; volume management自动检测CD-ROM,但不检测diskette,除非用volcheck. volcheck检测diskette和其它可移动设备. volume management能mount以下文件系统: ufs, pcfs, hsfs, udfs 用卷管理: 如是vold检测到软件或光盘并且发现其中包含文件系统会把它们mount到相应位置: First diskette drive /floppy/floppy0 First CD-ROM or DVD drive /cdrom/cdrom0 First Jaz drive /rmdisk/jaz0 First Zip drive /rmdrive/zip0 First PCMCIA card /pcmem0 如果没有发现文件系统: First diskette drive /vol/dev/aliases/floppy0 First CD-ROM or DVD drive /vol/dev/aliases/cdrom0 First Jaz drive /vol/dev/aliases/jaz0 First Zip drive /vol/dev/aliases/zip0 First PCMCIA card /vol/dev/aliases/pcmem0 当volume management 启动时,一个普通用户访问cdrom或