70W CBSERIES 多功能规格书(英).doc

APPROVED SHEET CUTOMER NO.: DESCRIPTION : AC ADAPTER _SPECIFICTION: 70W CBSERIES _DATE: _Signature and/or stamp by customer for approvalTested ByChecked ByApproved BySignature and/or stamp by supplier for approvalTested ByChecked ByApproved ByMANUFACTORY:ADD:TEL: FAX: POST NO.:Http: Contact: I. External Dimension Diagram (LWH =128.3*65.5*18.5mm)II. Electrical Characteristics1ScopePower source: input voltage 100VAC-240VAC; output voltage 15.0VDC; output current 4.7A (Max).2. Normal operating conditions for power sourceSupply voltage and frequency: supply voltage ranges between 100VAC and 240VAC.Min.TypicalMax.Input voltage (Vac)100Vac220Vac264VacInput current (A)1.5A0.7A0.6AInput frequency (Hz)47Hz50Hz/60Hz63Hz3Operating environmentTemperature: 0+40Humidity: 10%-90%Atmospheric pressure: 70kPa106kPa4. Electrical properties of power source4.1 Case temperature: after the power source continuously operates at ambient temperature of 25, the temperature rise of the case does not exceed 65.Surge current: 50A Amp-Pcak For 115VAC; 25A Amp-Pcak For 230VAC Max Load, 25 DEG C, Cold start.Input current: 0.45A (Rms) for 230VAC or 0.9A (Rms) for 115VAC.4.2 Input powerAt time of zero load: =1W;At time of maximum load: =70W.4.3 EfficiencyAt rated load, the power efficiency is at least 80%.5. Output voltage and currentOutput voltageRated currentRated powerOutput voltage rangeOutput current rangeRipple & noiseConnector SizeFit for laptops15V/M14.7A70W14.5-15.5V0-4.7A150mVp-p6.3*3.0mmToshiba16V/M24.4A70W15.5-16.5V0-4.4A150mVp-p5.5*2.5mmIBM, Lenovo16V/M34.4A70W15.5-16.5V0-4.4A150mVp-p6.5*4.4mmSony, Fujitsu18.5V/M43.8A70W18-19V0-3.8A150mVp-p4.8*1.7mmCompaq, HP19V/M53.7A70W18.5-19.5V0-3.7A150mVp-p5.5*2.5mmAcer, Compaq, Delta, HP, Fujitsu, Gateway, Toshiba, Liteon19V/M63.7A70W18.5-19.5V0-3.7A150mVp-p5.0*3.0mmSamsung19V/M73.7A70W18.5-19.5V0-4.7A150mVp-p5.5*2.1mmAcer, Compaq, Delta, HP, Fujitsu, Gateway, Toshiba, Liteon19.5V/M83.6A70W19V-20V0-3.6A150mVp-p6.5*4.4mmSony19.5V/M93.6A70W19V-20V0-3.6A150mVp-p7.4*5.0mmDell20V/M103.5A70W19V-20V0-3.5A150mVp-p3 holesDell20V/M113.5A70W19V-20V0-3.5A150mVp-p7.9*5.4mmIBM, Lenovo, option18.5V/M123.8A70W18-19V0-3.8A150mVp-p7.4*5.0mmHP, Compaq, optionNote: ripple and noise test: apply 0.1uF ceramic capacitor and 10uF electrolytic capacitor at the test output end to filter out the noise sensed by output conductors. During test, the bandwidth of the oscilloscope is 20MHz.6. Short circuit protectionPower source will not be damaged during continuous short circuit of load. Regardless of short circuit of load before or after electrification, power output shall return to normal when the short circuit of load is removed.9. Requirements of interface and othersSpecifications of input and output cablesAC input2PIN (CCC) AC connectorDC output cable2464 18AWG, 1200mmIII. External Appearance and Mechanical Properties1. External appearance and apparent requirements1.1 The surface of power source shall be free from forming defects and other mechanical damages, such as scratch, flow mark, burr, crack, noticeable shrink mark, and nick;1.2 Model number, safety certification and other marks shall be legible;1.3 When the power source is shaken, the inside of power source shall have no sense of shaking;1.4 The surface of connection line has no crack. After the high voltage part is connected to municipal power system, the electrified metal shall not be exposed.2. Drop testPlace the unpacked power source on the horizontal support plate, and allow the power source to fall from a height of 1000mm onto a 20mm-thick wood bench. Repeat the operation twice for each side and in the most unfavorable direction. After the test, the pin of power source shall not sh