




已阅读5页,还剩6页未读, 继续免费阅读
版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
NANCHANG UNIVERSITY 课程名称 课程名称 学术英语学术英语 题题 目 目 A Study of Energy Efficient Cloud Computing Powered by Wireless Energy Transfer 英语班级 英语班级 理工理工 1615 班班 专业专业 年级 年级 物联网工程物联网工程 161 班班 姓名姓名 学号 学号 47 二零一八年六月 A Study of Energy Efficient Cloud Computing Powered by Wireless Energy Transfer 1 A Study of Energy Effi cient Mobile Cloud Computing Powered by Wireless Energy Transfer Abstract Achieving long battery lives or even self sustainability has been a long standing challenge for designing mobile devices This study presents a novel solution that seamlessly integrates two technologies mobile cloud computing and microwave power transfer MPT to enable computation in passive low complexity devices such as sensors and wearable computing devices Specifically considering a single user system a base station BS either transfers power to or offloads computation from a mobile to the cloud the mobile uses harvested energy to compute given data either locally or by offloading A framework for energy efficient computing is proposed that comprises a set of policies for controlling CPU cycles for the mode of local computing time division between MPT and offloading for the other mode of offloading and mode selection Given the CPU cycle statistics information and channel state information CSI the policies aim at maximizing the probability of successfully computing given data called computing probability under the energy harvesting and deadline constraints Furthermore this study reveals that the two simple solutions to achieve the object to support computation load allocation over multiple channel realizations which further increases the computing probability Last the two kinds of modes suggest that the feasibility of wirelessly powered mobile cloud computing and the gain of its optimal control And the future aspect to study is simply to be answer Key words wireless power transfer energy harvesting communications mobile cloud computing energy efficient computing A Study of Energy Efficient Cloud Computing Powered by Wireless Energy Transfer 1 A Study of Energy Efficient Cloud Computing Powered by Wireless Energy Transfer 2 Introduction Mobile cloud computing MCC as an emerging computing paradigm integrates cloud computing and mobile computing to enhance the computation performance of mobile devices The objective of MCC is to extend powerful computing capability of the resource rich clouds to the resource constrained mobile devices e g laptop tablet and smartphone so as to reduce computation time conserve local resources especially battery and extend storage capacity To achieve this objective MCC needs to transfer resource intensive computations from mobile devices to clouds referred to as computation offloading The core of computation offloading is to decide on which computation tasks should be executed on the mobile device or on the cloud and how to schedule local and cloud resource to implement task offloading The explosive growth of Internet of Things IOT and mobile communication is leading to the deployment of tens of billions of cloud based mobile sensors and wearable computing devices in near future Huang Chae 2010 Prolonging their battery lives and enhancing their computing capabilities are two key design challenges They can be tackled by two promising technologies microwave power transfer MPT for powering the mobiles computation intensive tasks from the mobiles to the cloud and mobile computation offloading MCO Two technologies are seamlessly integrated in the current work to develop a novel design framework for realizing wirelessly powered mobile cloud computing under the criterion of maximizing the probability of successfully computing given data called computing probability The framework is feasible since MPT has been proven in various experiments for powering small devices such as sensors or even small scale airplanes and helicopters Furthermore sensors and wearable computing devices targeted in the framework are expected to be connected by the cloud based IOT in the future providing a suitable platform for realizing MCO Materials MCO has been an active research area in computer science where research has focused on designing mobile cloud systems and software architectures virtual machine migration design in the cloud and code partitioning techniques in the mobiles for reducing the energy consumption and improving the computing performance of mobiles Nevertheless implementation of MCO requires data transmission and message passing over wireless channels incurring transmission power consumption The existence of such a tradeoff has motivated cross disciplinary research on jointly designing MCO and adaptive transmission algorithms to maximize the mobile energy savings A stochastic control algorithm was A Study of Energy Efficient Cloud Computing Powered by Wireless Energy Transfer 2 proposed for adapting the offloaded components of an application to a time varying wireless channel Furthermore multiuser computation offloading in a multi cell system was explored by Shinohara 2014 where the radio and computational resources were jointly allocated for maximizing the energy savings under the latency constraints According to Swan 2012 the threshold based offloading policy was derived for the system with intermittent connectivity between the mobile and cloud Lastly the CPU cycle frequencies are jointly controlled with MCO given a more skilled and increasingly appropriate A Study of Energy Efficient Cloud Computing Powered by Wireless Energy Transfer 3 wireless channel The framework is further developed in the current work to include the new feature of MPT Kosta et al 2012 This introduces several new design challenges Among others the algorithmic design of local computing and offloading becomes more complex under the energy harvesting constraint due to MPT which prevents energy consumption from exceeding the amount of harvested energy at every time instant Another challenge is that MPT and offloading time share the mobile antenna and the time division has to be optimized Now the technology is being further developed to power wireless communications This has resulted in the emergence of an active field called simultaneous wireless information and power transfer SWIPT The MPT technology has been developed for point to point high power transmission in the past decades Brown 1984 Furthermore existing wireless networks such as cognitive radio and cellular networks have been redesigned to feature MPT Most prior work on SWIPT aims at optimizing communication techniques to maximize the MPT efficiency and system throughput In contrast the current work focuses on optimizing the local computing and offloading under a different design criterion of maximum computing probability Huang Lau 2014 Methods and Results Consider a single user system comprising one multi antenna base station BS using transmit receive beamforming for transferring power to a single antenna mobile or relaying offloaded data from the mobile to the cloud To compute a fixed amount of data the mobile operates in one of the two available modes Local computing and offloading in the mode of local computing MPT occurs simultaneously as computing based on the controllable CPU cycle frequencies Nevertheless in the mode of offloading the given computation duration is adaptively partitioned for separate MPT and offloading since they share the mobile antenna Shinohara 2014 Assume that the mobile has the knowledge of statistics information of CPU cycles and channel state information CSI The individual modes as well as mode selection are optimized for maximizing the computing probability under the energy harvesting and deadline constraints For tractability the metric is transformed into equivalent ones namely average mobile energy consumption and mobile energy savings for the modes of local computing and offloading respectively Compared with the prior work the current work integrates MPT with the mobile cloud computing which introduces new theoretical challenges In particular the energy A Study of Energy Efficient Cloud Computing Powered by Wireless Energy Transfer 3 harvesting constraint arising from MPT makes the optimization problem for local computing non convex To tackle the challenge the convex relaxation technique is applied without compromising the optimality of the solution It is shown in the sequel that the local computing policy is a special case of the current work where the transferred power is sufficiently high by Swan 2012 Furthermore the case of dynamic channel for mobile cloud computing is explored Approximation methods are used for deriving the simple and close to optimal policies Mobile mode selection The above results are combined to select the mobile mode for maximizing the computing probability Given feasible computing in both modes the only one A Study of Energy Efficient Cloud Computing Powered by Wireless Energy Transfer 4 yielding the larger energy savings is preferred and the selection criterion is derived in terms of thresholds on the BS transmission power as well as the deadline for computing Huang et al 2012 Optimal data allocation for a dynamic channel Last the above results are extended to the case of a dynamic channel modeled as independent and identically distributed block fading and non causal CSI at the mobile acquired from e g channel prediction The problem of optimizing an individual mobile mode local computing or offloading is formulated based on the master and slave model using the same metric as the fixed channel counterpart Kumar Liu 2013 Conclusion Wireless and mobile computing technologies provide more possibilities for accessing services conveniently Mobile devices will be improved in terms of power CPU and storage Mobile cloud computing has emerged as a new paradigm and extension of cloud computing By two kinds of available modes we can purely know of the Energy Effi cient Mobile Cloud Computing Through my study for the Mobile Cloud Computing we are here exposing two simple solutions to solve this problem Although my research is pretty basic it still benefit the process of the development for mobile cloud computing and how to make it energy efficient We believe that exploring other alternatives such as introducing a middleware based architecture using an optimizing offloading algorithm could help better the available frameworks and provide more efficient and more flexible solutions to the MCC users We know that the kind of technology will play an increasing important role in our daily life in the future By this study we better know of the newest development in our science area This work can be extended to several interesting directions First full duplex transmission can be implemented in the pro posed system to support simultaneous MPT and computation offloading to improve the power transfer efficiency Second the current work focusing on a single computing task can be generalized to the scenario of computing a multi task program which involves program partitioning and simultaneous local computing and offloading Last it is interesting to extend the current design for single user mobile cloud computing system to the multiuser system that requires joint design of radio and computational resource allocation for mobile cloud comput
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 2025至2030年中国高温高压液流染色机市场分析及竞争策略研究报告
- 2025至2030年中国金银纪念章市场分析及竞争策略研究报告
- 2025至2030年中国调节螺栓滑块市场分析及竞争策略研究报告
- 2025至2030年中国白铜锡退镀主盐市场分析及竞争策略研究报告
- 2025至2030年中国涂布机械换热器市场分析及竞争策略研究报告
- 2025至2030年中国毛石铜面砖市场分析及竞争策略研究报告
- 2025至2030年中国春绣球茶市场分析及竞争策略研究报告
- 2025至2030年中国手持式折射计市场分析及竞争策略研究报告
- 2025至2030年中国塑胶改质剂市场分析及竞争策略研究报告
- 2025至2030年中国双锥卧式珠磨机市场分析及竞争策略研究报告
- 光纤跳线生产技术工艺流程
- 警用装备智能管理中心(室)建设方案及技术参数
- TCVN-2622-越南建筑防火规范(中文版)
- 2023-2024学年浙江省台州市小学数学四年级下册期末点睛提升试卷
- JJG 648-2017非连续累计自动衡器(累计料斗秤)
- JJG 169-2010互感器校验仪
- 建设工程监理合同(住房和城乡建设部2023)
- GB/T 28267.1-2021钢丝绳芯输送带第1部分:普通用途输送带的设计、尺寸和机械要求
- GB/T 13610-2020天然气的组成分析气相色谱法
- 中医内科学瘿病
- 党章党史知识竞赛题库及答案
评论
0/150
提交评论