螺栓预紧力机械式测量传感器(可视化警示螺栓)

螺栓预紧力机械式测量传感器(可视化警示螺栓)深圳立创工控 吕云飞产品介绍：机械式预紧力测量传感器，也可称为预紧力警示螺栓、螺栓预紧力指示器。是一款带有内置可视指示器的特殊紧固件，可对预紧力实时监测。原理：螺栓在安装时会产生张力，当紧固件足够时，通过机械制动是色彩部件产生色差变化，即实现预紧力通过颜色变化得以体现。规格：Size Ranges7/16 (M10) to 2-1/2” (M64)Length Range1-1/4” (30mm) to 16” (400mm)Available GradesGrade 5, Grade 8, Class 8.8, Class 10.9For others contact usAvailable FinishesPlain, clear zinc, yellow zincFor others contact usThreadingPartial or fullGrip LengthsMinimums apply to fully threaded boltsCustomized Design Tension Range30-90% of Proof LoadAccuracy+/- 10% of Design TensionOperating Temperature Range-20 C to 75 C / -4 F to 168 FStrength Reduction as a Result of ModificationOnly in smaller sizes or fully threaded boltsOperating Temperature Range使用价值：If you need to reduce the costs of your bolted jointtightening procedure and post-installation bolted jointinspection- If your bolts have a torque specification- If bolts need to be loosened and re-tightened frequently- If you want to inspect without touching the bolts- If you want to simplify maintenance for equipmentoperators- If you need a visual audit check that bolts were properlyinstalled- If accurate bolted joint clamp force is critical to yourapplication- If variable friction factors make torque measurementinadequate- If you want to substitute expensive torque wrencheswith ordinary wrenches- When user safety depends on your bolts being tight原理示意图：应用案例：产品检测及包装：机械式预紧力测量传感器螺栓指示器经过100检查和测试，以确保我们生产的每一个都符合我们的要求；严格的质量控制标准，每种产品都在张力下进行测试，直到指示剂的颜色达到规定的价值；每个装运