RFID空中接口.doc

一、技术参数要求：1.1 硬件：组件名称技术指标基带信号处理器频率范围：250 kHz to 80 MHz实时带宽：20 MHz输入：2 CH, 100 MS/s, 14 bits输出：2 CH, 200 MS/s, 14 bitsFPGA：Xilinx Virtex 5矢量信号发生器频率范围：250 kHz to 2.7 GHz实时带宽：20 MHz温度稳定性：20 ppb时钟准确度：50 ppb相位噪声：-90 dBc/Hz输出信号范围：-145 dBm +10 dBm绝对准确度：1 dB, typical噪声密度：-130 dBm/Hz矢量信号分析仪频率范围：9 kHz to 2.7 GHz实时带宽：20 MHz温度稳定性：20 ppb时钟准确度：50 ppb无寄生动态范围：80dB相位噪声：-90 dBc/Hz输入信号范围：-130 dBm +30 dBm绝对准确度：1 dB, typical噪声密度：-130 dBm/Hz射频功率放大器频率范围：0.51000MHz最大输出功率：4 watt增益：35dB反向隔离度：80dB高频RFID测试天线符合ISO 10373-6 / ISO 18047-3定义适用于13.56MHz测试超高频RFID测试天线圆极化发射天线和接收天线适用于860960MHz测试微波RFID测试天线线极化发射天线和接收天线适用于2.45GHz测试配套射频连接线缆250 kHz to 2.7 GHz接口与设备相匹配1.2 软件：组件名称技术指标二次开发环境能够与各种测量硬件紧密集成支持信号处理、分析和数学运算功能信号处理函数库支持联合时频分析等高级功能自动化测试开发环境测试适配器，可以任何编程语言编写多线程序列执行engineASCII、HTML/Web、XML报告生成可与Access、Oracle、SQL服务器数据库连接RFID标签测试软件支持以下RFID标准的标签测试功能高频：ISO14443A/MIFARE, ISO14443B, ISO15693/ISO18000-3M1, ICode1, ISO18092/Felica/NFC超高频：ISO18000-6A, ISO18000-6B, ISO18000-6C/EPC UHF Class1 Gen2微波：ISO18000-4M1RFID阅读器测试软件支持以下RFID标准的阅读器测试功能高频：ISO14443A/MIFARE, ISO14443B, ISO15693/ISO18000-3M1, ICode1, ISO18092/Felica/NFC超高频：ISO18000-6A, ISO18000-6B, ISO18000-6C/EPC UHF Class1 Gen2微波：ISO18000-4M1RFID信号监听软件支持以下RFID标准的信号监听功能高频：ISO14443A/MIFARE, ISO14443B, ISO15693/ISO18000-3M1, ICode1, ISO18092/Felica/NFC超高频：ISO18000-6A, ISO18000-6B, ISO18000-6C/EPC UHF Class1 Gen2微波：ISO18000-4M1控制系统供方提供基于Windows的控制系统，测试软件安装于该控制系统中。1.3 系统所覆盖的检测标准及主要测试项：能够实现高频、超高频及微波频段的射频识别标签及阅读器（RFID）产品的协议一致性测试和射频性能测试。其测试能力符合ISO14443A，ISO14443B，ISO15693，ISO18000-3M1，ICode1，ISO18092，ISO18000-6A，ISO18000-6B，ISO18000-6C，ISO18000-4M1，EPC UHF Class1 Gen2各标准中规定的物理层和协议层主要测试项目，并且具备单步检测模式，以及自动化流程检测模式。依照高频、超高频及微波频段的各射频识别标准中规定的物理层和协议层具体检测项目、检测参数和检测方法进行物理层参数和协议层参数的检测，具体见附件1覆盖的检测标准及主要测试项。二、其它配置要求：备份电缆一套、19英寸全高机柜三、其他要求：附件1覆盖的检测标准及主要测试项检测项目检测参数单位协议种类ISO 14443 Type A载波频率Center Frequency13.56MHzFrequency Accuracy7kHz调制方式Command ModulationASKModulation Depth/Index100%Response ModulationSub-carrier OOK射频包络Power On/Off TimeusPower On/Off Ripple%Power Off Level%Transition Time t138/fc40.5/fcusTransition Time t27/fc36/fcusTransition Time t33/fc16/fcusTransition Time t42/fc6/fcusTransition Ripple10%Pulse Width2.0-3.0usDuty Cycle%数据编码Command CodingModified MillerResponse CodingManchester传输码率Command Data Rate106, 212, 424, 848kbpsResponse Link FrequencykHzResponse Data Rate106, 212, 424, 848kbps链接时间Etu9.44usTurn-around Time T1(nx128+84)/ fc, (nx128+20)/fcusTurn-around Time T2usTurn-around Time T3usTurn-around Time T4us帧结构SOFSequence ZEOFBit 0+Sequence Y指令集Mandatory CommandsREQA, WUPA, Anticollision, Select, HLTA, RATS, PPS, I-Block, R-Block, S-Block_wtx, S-Block_deselectOptional Commands标签内存Memory ContentUID_Size, Anticollision_Level, UID, BCC协议状态State TransitionIdle, Ready, Active, Halt, Protocol协议种类ISO 14443 Type B载波频率Center Frequency13.56MHzFrequency Accuracy7kHz调制方式Command ModulationASKModulation Depth/Index15-25%Response ModulationSub-carrier BPSK射频包络Power On/Off TimeusPower On/Off Ripple%Power Off Level%Transition Time tr/tf16/fcusTransition Ripple10%Pulse Width2.0-3.0usDuty Cycle%数据编码Command CodingNRZ-LResponse CodingNRZ-L传输码率Command Data Rate106, 212, 424, 848kbpsResponse Link FrequencykHzResponse Data Rate106, 212, 424, 848kbps链接时间Etu9.44usTurn-around Time T1Max (256/fs)*2FWIusTurn-around Time T2usTurn-around Time T3usTurn-around Time T4us帧结构SOF1011etu low+23etu highEOF1011etu low指令集Mandatory CommandsREQB, WUPB, Slot-MARKER, ATTRIB, HLTB, I-Block, R-Block, S-Block_wtx, S-Block_deselectOptional Commands标签内存Memory ContentPUPI, AFI, Protocol_Type, FWI, ADC, FO协议状态State TransitionIdle, Ready_Requested, Ready_Declared, Protocol, Halt协议种类ISO 15693, ISO 18000-3 Mode 1载波频率Center Frequency13.56MHzFrequency Accuracy7kHz调制方式Command ModulationASKModulation Depth/Index10 or 100%Response ModulationOne/Two Sub-carrier ASK射频包络Power On/Off TimeusPower On/Off Ripple%Power Off Level%Transition Time t16.09.44usTransition Time t22.16.0usTransition Time t34.5usTransition Time t40.8usTransition Ripple5.0%Pulse Width6.0-9.44usDuty Cycle%数据编码Command Coding1 out of 4 / 1 out of 256 PPMResponse CodingManchester传输码率Command Data Rate1.65 or 26.48kbpsResponse Link FrequencykHzResponse Data Rate6.62, 6.67 or 26.48, 26.69kbps链接时间Etu9.44usTurn-around Time T1300usTurn-around Time T2usTurn-around Time T3usTurn-around Time T4us帧结构SOFSOF 1 out of 4 / 1 out of 256EOFEOF either mode指令集Mandatory CommandsInventory, Stay QuietOptional CommandsRead Signal Block, Write Single Block, Lock Block, Read Multiple Blocks, Write Multiple Blocks, Select, Reset To Ready, Write AFI, Lock AFI, Write DSFID, Lock DSFID, Get System Information, Get Multiple Block Security Status标签内存Memory ContentDSFID, UID, Info Flags, AFI协议状态State TransitionReady, Quiet, Selected协议种类ISO 18092 NFC载波频率Center Frequency13.56MHzFrequency Accuracy7kHz调制方式Command ModulationASKModulation Depth/Index830%Response ModulationOOK射频包络Power On/Off TimeusPower On/Off Ripple%Power Off Level%Transition Time tr/tf2.0, 1.0usTransition Ripple10%Pulse WidthusDuty Cycle%数据编码Command CodingManchesterResponse CodingManchester传输码率Command Data Rate212, 424kbpsResponse Link FrequencykHzResponse Data Rate212, 424kbps链接时间Etu4.72, 2,36usTurn-around Time T1(256*16/fc)*2WTusTurn-around Time T2usTurn-around Time T3usTurn-around Time T4us帧结构Preamble48 Bit 0SYNCB24D指令集Mandatory CommandsPolling Request, Attribute Request, Wakeup Request, Parameter Selection Request, Data Exchange Protocol Request, Deselect Request, Release RequestOptional Commands标签内存Memory ContentNFCID, Pad, TO协议状态State TransitionSense, Resolution, Selected, Sleep协议种类I Code 1载波频率Center Frequency13.56MHzFrequency Accuracy7kHz调制方式Command ModulationASKModulation Depth/Index14%Response ModulationSub-carrier ASK射频包络Power On/Off TimeusPower On/Off Ripple%Power Off Level%Transition TimeusTransition Ripple%Pulse Width9.44usDuty Cycle%数据编码Command CodingStandard/Fast PPMResponse CodingManchester传输码率Command Data Rate1.65 or 26.48kbpsResponse Link FrequencykHzResponse Data Rate6.62 or 26.48kbps链接时间Etu9.44usTurn-around Time T1usTurn-around Time T2usTurn-around Time T3usTurn-around Time T4us帧结构SOFN/AEOFN/A指令集Mandatory CommandsAnticollision_Select, Selected Read, Unselected Read, Write Block, Halt, Reset Quiet Bit, EASOptional Commands标签内存Memory ContentSNR, EAS协议状态State TransitionReady, Quiet, Selected协议种类ISO 18000-6 Type A载波频率Center Frequency860-960MHzFrequency Accuracy50ppm调制方式Command ModulationASKModulation Depth/Index27100%Response ModulationASK射频包络Power On/Off Time500usPower On/Off Ripple10, 5%Power Off Level1%Transition Time4usTransition Ripple50usTurn-around Time T3usTurn-around Time T4us帧结构SOF01011111EOF01111111指令集Mandatory CommandsInit_round, Next_slot, Close_slot, Standby_round, New_round, Reset_to_ready, Select, Read_blocks, Get_system_information, Init_round_all, Begin_round, Write_single_block, Write_multiple_blocks, Lock_blocks, Write_AFI, Lock_AFI, Write_DSFID, Lock_DSFID, Get_block_lock_status, Optional Commands标签内存Memory ContentTagtype, Batterystatus, Signature, Randomnumber, UID, DSFID, AFI协议状态State TransitionReady, Quiet, Selected, Round Active, Round Standby协议种类ISO 18000-6 Type B载波频率Center Frequency860-960MHzFrequency Accuracy50ppm调制方式Command ModulationASKModulation Depth/Index90100%Response ModulationASK射频包络Power On/Off Time500usPower On/Off Ripple10, 5%Power Off Level1%Transition Time0.17/fdatarateusTransition Ripple400usTurn-around Time T3usTurn-around Time T4us帧结构Preamble Detect Field400usPreamble010101010101010101DelimiterDelimiter 1,2,3,4指令集Mandatory CommandsGroup_Select, Group_Unselect, Multiple_Unselect, Group_Select_Flags, Group_Unselect_Flags, Fail, Success, Resend, Initialize, Read, Data_Read, Read_Flags, Read_Variable, Read_Port, Read_Unaddressed, Read_Verify, Write, Lock, Query_Lock, Write_MultipleOptional Commands标签内存Memory ContentIdentifier, Word_Data协议状态State TransitionReady, ID, Data Exchange协议种类ISO 18000-6 Type C, EPC UHF Class 1 Generation 2载波频率Center Frequency860-960MHzFrequency Accuracy10ppm调制方式Command ModulationDSB/SSB-ASK or PR-ASKModulation Depth/Index80-100%Response ModulationASK or PSK射频包络Power On/Off Time500usPower On/Off Ripple5%Power Off Level1%Transition Time0-0.33TariTransition Ripple0.0TpriTurn-around Time T42.0RTcal帧结构Delimiter12.5usRTcal2.5-3.0TariTRcal1.1-3.0RTcalDivide Ratio8, 64/3TRext0, 1指令集Mandatory CommandsSelect, Query, QueryAdjust, QueryRep, ACK, NAK, Req_RN, Read, Write, Kill, LockOptional CommandsAccess, BlockWrite, BlockErase, BlockPermaLock标签内存Memory ContentPC, EPC, CRC16, TID, User Bank, Access Password, Kill Password协议状态State TransitionReady, Arbitrate,