HP-UX.应用HP-UX搭建Fonts Server,结合xManager连接,并在终端显示中文.docx

HP-UX.应用HP-UX搭建Fonts Server，结合xManager连接，并在终端显示中文 收藏 Goller.CN SAP Education赞助商链接几位工作伙伴的结晶，不敢独享，特此声明！特别鸣谢：HP-8001st 确认系统支持中文语言环境执行 locale 查询# locale -a | grep zh 输出zh_CN.hp15CN zh_CN.utf8 zh_HK.big5 zh_HK.utf8 zh_TW.big5 zh_TW.ccdc zh_TW.eucTW zh_TW.utf8上述为系统所支持的中文语言环境/（root)#swlist -l fileset International # Initializing. # Contacting target myhost. # # Target: HP5400-1:/ # # International B.11.11 International International.ARABIC B.11.11 ARABIC International.BULGARIAN B.11.11 BULGARIAN International.CHINESES B.11.11 CHINESES International.CHINESET 以上操作应该说明我已安装了中文环境。 然后编辑/etc/dt/config/Xconfig文件，修改Dtlogin*language:zh_CN.hp15CN 再/sbin/init.d/dtlogin.rc resetSet-up a Font ServerIt is necessary to set up a font server to provide fonts to the Reflection X Xserver so that CDE and HP-UX applications will work correctly. To determine whether or not a font server is already running on the HP-UX system, execute the following command:$ ps -ef | grep xfsIf a font server were running, you would see the following process in the process list: /usr/bin/X11/xfs -config /etc/X11/fs/config -port 7000 -daemIf a font server is already running, continue with the section Configuring an Existing Font Server; otherwise, go to the section Configuring and Starting a New Font Server CONFIGURING AN EXISTING FONT SERVER 1. Append the following font path to the end of the catalogue= line in the font servers config file, /etc/X11/fs/config: $ /usr/dt/config/xfonts/C/NOTE: All font paths are separated by a comma (,). 1. Stop and restart the font server: $ /sbin/init.d/xfs stop; /sbin/init.d/xfs start NOTE: Stopping and restarting the font server while in use by users on Xterminals could potentially reset their Xserver, causing their session to exit. CONFIGURING AND STARTING A NEW FONT SERVER 1. Append the following font path to the end of the catalogue= line in the font servers config file, /etc/X11/fs/config:/usr/dt/config/xfonts/C/ 2. Set the RUN_X_FONT_SERVER environment variable to 1 in the /etc/rc.config.d/xfs file:RUN_X_FONT_SERVER=1 3. Start the font server:$ /sbin/init.d/xfs start 4. Verify that the font server has been started:$ ps -ef | grep xfs RESOLVING XFontserver error: Cannot open configuration file. ERRORS If the error, XFontserver error: Cannot open configuration file. results when trying to start the font server, perform one of the following steps to resolve the problem: Install the latest font server patch. Add the following line to the end of the /etc/rc.config.d/xfs file:CONFIG_FILE_NAME=/etc/X1